Looking for a Lost '32 Ford Roadster - Engine Builder Magazine

Looking for a Lost ’32 Ford Roadster

Nail12 copyEvery antique racecar has a past history. Sometimes that history is well documented, and other times, it gets lost over the years through a succession of owners and events.

In the latter case, you have to judge the car for what it is…what you see in front of you.

Mike Nail’s ‘32 Ford Roadster is one of those latter cars. It looks like it just came from a dry lakes meet in 1932 or 1933.

The roadster still has the factory four-banger engine with the Miller overhead valve conversion and a rare Thomas intake with two 94 carbs perched on top.

The motor was also converted to a full-pressure oiling system and has Lincoln Zephyr gears in the transmission, a common swap from the era. The car still has the original mechanical brakes and was never converted to hydraulic, as was common in the 1940’s and 1950’s.

There is an old-style Moon tank hanging out front on the spreader bar, the old time racing goggles and leather helmet hanging on the steering column, and the brass fire extinguisher mounted to the passenger kick panel, all things that are correct for the era.

The body is obviously an early ‘32 from the narrow lip on the inside of the top of the doorsill. The body itself is about as stock as Henry Ford built it, with none of the usual modifications found on a purpose built hot rod from the era. The frame is likewise, no cutting, welding, or grinding has been done to the frame, very unusual for a car from this era thus preserving what is now a very sought after body and frame.

There are some period updates, the sealed beam conversion, the vintage under dash gauges, the JC Whitney style interior, 1950 Pontiac taillights, and the 18”/16” big and little wheel combination.

The inside of the tires are cut like the old dirt track racers used to do with a razor knife to get a square corner for better traction. The cut side of the tire should be on the outside for dirt track use, but could have been reversed for the street.

Mike has spent hours and hours tracking down previous owners to gather as much history about the car as he can find. Here is what he knows so far…

In June of 1972, the car was bought from a car collector in Wichita, KS, by a car collector in Topeka, KS. That person kept it till September of 1974, doing some much needed engine work and mechanical repairs.

Miller1 copyHe then sold it to a car collector in Hutchinson, KS, who kept it in his collection for the next 38 years until August of 2012.

During that 38-year span nobody knew what happed to the roadster, it just disappeared and never showed up at any car events. That’s when the rumors and speculations started.

No one seems to know much of the history prior to 1972, either. For example no one knows if it was ever a California car as evident by the 1963 tag on the front of the car.

No one knows if the car has a racing history, or who, or where it was raced. The collector who had it the longest put less than 50 miles on it in the 38 years that he owned it.

One more thing… to add a little mystery to the car.

One Sunday afternoon, Mike was driving home from a car show and it began to rain. Mike pulled over to check the trailer and the car to make sure everything was secure. When he got to the side of the car he couldn’t believe his eyes.

“Miller Engineering” was printed there on the side of the car  — the letters spelled out just as plain as day.

Running around to the other side…the lettering was the same on that side too.

It had showed up when the car got wet, but couldn’t be seen when the car was dry. The now black lettering was clearly once a dark maroon color and looked to be professionally done, but had been painted over with a brush, allowing some of the maroon color to bleed through.

Who lettered the car and when, is yet another mystery surrounding this car.

Mike has been collecting cars for more than 40 years and he will tell you that once in your lifetime, you will get a chance to own a rare and unique car that is the car of your dreams.

He found his, as well as some new letters for the car — “NOT FOR SALE.”

You May Also Like

Shop Solutions March 2024

I always keep a pair of needle nose pliers and a small, straight screwdriver in my blast cabinet to hold small parts when blasting.

Engine Builder and Engine Pro present Shop Solutions in each issue of Engine Builder Magazine and at enginebuildermag.com to provide machine shop owners and engine technicians the opportunity to share their knowledge to benefit the entire industry and their own shops. Those who submit Shop Solutions that are published are awarded a prepaid $100 Visa gift card. Submit your Shop Solution at [email protected]. You must include your name, shop name, shop address and shop telephone number. Submitted Shop Solutions not published will be kept on file and reevaluated for each month’s new entries.

The Road to AAPEX Season 2, Ep 8

The innovation of the Lincoln Highway wasn’t just about building roads—it was about putting them on the map. The Wyoming Historical Society notes that the abandoned routes laid down by the Union Pacific railroad from 1867 to 1869 were often the best, and sometimes the only, east-west path available when developing the Lincoln Highway. In fact,

The Road to AAPEX Season 2, Ep 7

Rolling through Nebraska, Babcox Media’s Joe Keene meets kindred spirits as he drives the rare Lincoln Blackwood he refurbished for his journey to AAPEX. Along the way, he meets a family traveling the Lincoln Highway section by section, taking in sights such as the Great Platte River Road Archway Monument and the Classic Car Collection,

The Road to AAPEX Season 2, Ep 6

It’s the unexpected moments that make a trip memorable. Babcox Media’s Joe Keene, an ASE-certified technician who fixed a rare Lincoln Blackwood, enters Iowa on his drive to AAPEX and discovers the charm of small-town America along the Lincoln Highway. A standout spot is the Lincoln Highway Hotel. Related Articles – The Road to AAPEX

The Road to AAPEX Season 2, Ep 5

To know where you’re going, you have to know where you’ve been. For Babcox Media’s Joe Keene, an ASE-certified technician charged with fixing up a rare Lincoln Blackwood, it means heading back to Transtar Autobody Technologies in Detroit to put the finishing touches on the Blackwood. Then, he’ll put Babcox Media HQ in the rearview

Other Posts

Compound-Turbo 6.0L Powerstroke Engine

Tyler Lambert’s Ford F-250 started as a project with a simple goal – to extract as much power as possible. Equipped with a 6.0L Powerstroke engine, the truck underwent a series of transformations, including a compound-turbo upgrade, that elevated it to the powerhouse it is now.

6.0L Powerstroke engine
CHE Ford Godzilla Trunnion Kit

The kit includes 16 heat-treated steel trunnions, 32 bronze bushings, and 33 retainer clips.

CHE trunnion kit
Holley Announces 2024 Flagship Events

Experiential events reinforce Holley’s commitment to serving customers across traditional and growing aftermarket verticals.

B&B Performance Adjustable Billet Timing Pointers

Available for SBC, BBC and SBF, pointers come with stainless steel pointer, fasteners and a black anodized finish.

timing pointers