CP-Carrillo 4.6 Ford Modular Bullet Rods

CP-Carrillo has introduced 4.6 Ford Modular Bullet rods. These connecting rods include the advanced features and improvements that CP-Carrillo has developed through rigorous testing and R&D.

Published: Jun 10, 2015

CP-Carrillo has introduced 4.6 Ford Modular Bullet rods. These connecting rods include the advanced features and improvements that CP-Carrillo has developed through rigorous testing and R&D.

Manufactured from our proprietary blend of steel on a near net forging for structural support and durability, these Bullet connecting rods are factory replacement, race ready straight out of the box.

Rods are supplied with WMC H-11 Tool steel bolts, have a C-C length of 5.932, with Big End Hone of 2.2394, and Pin End Hone of 0.8672 for a total weight of 613 grams. After rigorous R&D the Bullet 4.6 Ford Modular rods have been torture tested and rated for 1100+ HP, 30+ psi of boost and 8500RPM.

Part numbers:
ID: 8765, P/N: BF50-5932, MSRP: $1234.50

LS Engine Flatout Gaskets

Flatout Gaskets LS valve cover gaskets are available in paper/silicone in 0.60″ or 0.120″ thicknesses or steel/silicone laminate in 0.50″ or 0.100″ thicknesses.

By Greg Jones

Greg Jones is Content Director and Editor of Engine Builder Magazine.

Published: Apr 15, 2024

Flatout Gaskets has gone and made its valve cover gaskets for GM LS engines even better. Its new LS valve cover gaskets have a redesigned inside perimeter so they work with the factory center bolt-type valve covers. The design keeps the gasket registered on the valve cover so it won’t move around and lose the seal. That also means you can do away with the factory o-ring seal.