Fel-Pro Introduces First-to-Market Complete Engine Sealing Coverage for '02-'05 Jaguar 2.5L DOHC V6 Engines - Engine Builder Magazine

Fel-Pro Introduces First-to-Market Complete Engine Sealing Coverage for ’02-’05 Jaguar 2.5L DOHC V6 Engines

The Fel-Pro Gaskets brand has introduced first-to-market complete engine sealing coverage for tens of thousands of 2002-2005 Jaguar 2.5L DOHC V6 engines (VIN D) registered in North America.

FM-FEL-PRO-HS 26538PT-CMYK-FThe Fel-Pro Gaskets brand has introduced first-to-market complete engine sealing coverage for tens of thousands of 2002-2005 Jaguar 2.5L DOHC V6 engines (VIN D) registered in North America. Engine builders and technicians working on these engines can now rely on Fel-Pro PermaTorque MLS multi-layer-steel head gaskets as well as head and conversion sets, leak repair sets and seals needed to complete virtually any sealing repair.

These first-to-market replacement gaskets and seals join more than 1,000 other new Fel-Pro products covering a broad range of late-model foreign-nameplate engines.

“Demand for Fel-Pro sealing technologies now spans virtually every automotive engine nameplate sold in North America,” said Brian Owens, product manager, gaskets, North America, for Federal-Mogul Motorparts. “Engine professionals trust Fel-Pro to develop innovative gasket designs and materials that address the unique sealing requirements of today’s engines as well as the real-world casting and flange surfaces and other challenges encountered in the sealing repair environment.”

The Ford Duratec-based Jaguar 2.5L V6 engine was installed in more than 45,000 2002-2005 Jaguar X-Type sedans. With aluminum engine block and heads and producing 192 horsepower and 178 foot-pounds of torque, the engine is ideally suited to the latest Fel-Pro sealing technologies, including PermaTorque MLS head gaskets, which provide the robust seal needed to contain peak combustion pressures and temperatures and withstand significant casting motion.

Fel-Pro sealing products now available for this engine include:

Head Gaskets 26538PT (L), 26539PT (R)
Head Set HS26538PT
Conversion Set CS262481
Intake Man. Gasket Set MS96485
Plenum Gasket MS94694
Exhaust Man. Gasket Set MS95715
Oil Pan Gasket OS30697R
Crankshaft Seals TCS46055 (Front)
  BS40644 or BS40620 (Rear)
Valve Cover Gasket Set VS50615R
Valve Stem Seals SS72911
Head Bolts ES72208
Exhaust Flange  
      Connector 61678
      Ring 61388
Water Pump Gasket 35751 (7 bolt)
  35663 (8 bolt)
Throttle Body Gasket 61689
Thermostat  
      Case 35983
      Housing 35742
      O-Ring 35984
EGR Valve Gasket 70149

 

 

For more information: www.felpro-only.com.

You May Also Like

Summit Has RaceTec Pistons

With almost 1,300 configurations available, Summit Racing has the RaceTec Racing or AutoTec piston that fits your engine build.

With almost 1,300 configurations available, chances are good Summit Racing has the RaceTec Racing or AutoTec piston that fits your engine build. It’s like getting custom pistons right off the shelf.

AutoTec PistonsAutoTec Pistons are forged from low-expansion 4032 aluminum alloy to maintain tighter piston-to-wall clearances. That means better cylinder sealing, lower cylinder wear, and OEM noise levels, making them ideal for street and lightly boosted applications. Features include:• CNC-diamond turned skirts• CNC-machined ring grooves• Top ring land gas distribution grooves to enhance performance and improve ring seal • Broached double pin oilers• Wristpins, wire locks, and ring set included

Point One Small Block Chevy Head Studs

Point One’s E190 head studs boast an impressive 190,000psi nominal tensile strength and are made from grade 8740 steel sourced only from US mills.

LSX Oil Pump Mounting Brackets from Peterson Fluid Systems

Kits include all necessary hardware for mounting oil pumps to the engine block.

Hot Shot’s Secret Stiction Eliminator

Hot Shot’s Secret Stiction Eliminator is engineered to remove stiction, the sludge and varnish created from burnt oil, while also lubricating.

Howards Cams Track Smart Forged H-Beam Connecting Rods

Designed for serious street and sportsman race engines, these H-beam rods are forged and CNC-machined from certified 4340 high tensile steel.

Other Posts

Supertech Sodium-Filled Valves

These Supertech valves offer a significant reduction in valve head temperatures for today’s turbo engines.

Dart Fully Counterweighted LS Crankshaft

These eight-counterweight cranks are precision CNC-machined from premium 4340 steel billet.

Cobb Tuning Subaru Stage 2 Power Package

Cobb OTS maps are aimed at reliably increasing power output with the use of Cobb Stage 2 Power Packages.

Turbosmart’s New Fuel Pressure Regulator Lineup

Turbosmart regulators demonstrate leading fuel control and response via a true 1:1 ratio with superior flow and bypass capacity.