Edelbrock Pro-Flo 3 EFI Systems for Small- and Big-Block Chevy Engines - Engine Builder Magazine

Edelbrock Pro-Flo 3 EFI Systems for Small- and Big-Block Chevy Engines

Edelbrock Pro-Flo 3 EFI offers the ultimate in performance and power with the precise efficiency of a fully sequential port EFI system. The key to the system is Edelbrock's exclusive E-Tuner application with base calibrations that have been developed on the dyno.

pf3-tn

Edelbrock Pro-Flo 3 EFI offers the ultimate in performance and power with the precise efficiency of a fully sequential port EFI system. The key to the system is Edelbrock’s exclusive E-Tuner application with base calibrations that have been developed on the dyno.

The E-Tuner app uses a Bluetooth wireless connection to communicate with the ECU. The ECU’s self-learning capability will continually adjust the calibration to get the maximum performance from the engine. E-Tuner features a simple and easy to use setup wizard to help the consumer get started. Best of all, the E-Tuner app is free and can be downloaded from the Google Play store, allowing the consumer to use their personal Android based smart phone or tablet. If they don’t have a compatible device, Edelbrock also offers kits that include a 7” Android tablet with the E-Tuner app pre-installed.

Another great feature of Pro-Flo 3 is the ability live tune both fuel and spark from the E-Tuner app. This allows the consumer to make changes without having to turn off the vehicle. E-Tuner app gives you complete control of the system with the ability to adjust air-fuel ratios, ignition curve, idle speed, acceleration fuel, cooling fans, rev limiter and much more. The app also includes multiple dash displays to allow you to monitor engine vitals and performance from your Android smart phone or tablet while you’re driving. Each system includes a fully assembled intake manifold with throttle body installed, ECU, distributor, gaskets and all of the necessary hardware for installation.

Choose from a return-style or our unique Universal Fuel Sump for your fuel system (sold separately). Also available in two styles of intake manifold; traditional single-plane intake manifold with 4150-style throttle body and a Pro-Flo XT style with front mounted throttle body. All systems are available with a satin aluminum finish, select systems are available with polished and black powder coated finish to match Edelbrock accessories.

You May Also Like

UEM Icon 5.3L EcoTec3 L83 Gen V GDI Pistons

The piston line features forged 4032 alloy for NA and 2618 alloy for boosted applications.

UEM Icon pistons

UEM Pistons’ Icon GM Gen V GM truck 5.3L EcoTec3 L83 GDI offerings are specifically engineered for heavy towing and boost applications. The piston line features forged 4032 alloy for NA and 2618 alloy for boosted applications.

Additionally, these pistons fit stock 6.098" rods and aftermarket 6.125" rod combinations, offer dual forced-pin oiling, a type 3 hard anodized crown and top ring groove for increased service life, UEM’s UltraWear M42 skirt coating, and a complete ring kit featuring a steel gas-nitrided top ring. 

CHE Ford Godzilla Trunnion Kit

The kit includes 16 heat-treated steel trunnions, 32 bronze bushings, and 33 retainer clips.

CHE trunnion kit
Rislone DEF Crystal Clean

First-of-its-kind product removes damaging crystals from SCR systems, clears P20EE codes.

Rislone DEF Crystal Clean
Pistal High Compression 100mm Drop-in Piston Kit

Made from forged aluminum, these Pistal pistons are both light and have high resistance.

Pistal pistons
B&B Performance Adjustable Billet Timing Pointers

Available for SBC, BBC and SBF, pointers come with stainless steel pointer, fasteners and a black anodized finish.

timing pointers

Other Posts

Twin-TorqStorm-Supercharged 454 cid Big Block Chevy Engine

It had been more than two decades since Val Morris of Steve Morris Engines was behind the wheel of a drag car. This Chevy Malibu with a twin-supercharged 454 big block Chevy engine was her forray into drag-and-drive, and now she wants to go even faster!

Steve Morris Engines’ Twin-Supercharged 454 Big Block Chevy Engine

It had been 26 years since the last time Val Morris, Steve Morris’ wife, was behind the wheel of a drag car. The shop had been working on this project car named Sugar Momma, and got it done in time for Sick Week 2024. When it came time to figure out who’d drive it, Steve

Holley Sniper 2 EFI

Holley’s Sniper 2 EFI ushers in a wide range of new technologies and features.

Holley Sniper 2 EFI
Arrow Pit Carts

Arrow has standard configurations available as well as options that can be fine-tuned to suit your needs.