Snap-on 40” Shop Cart - Engine Builder Magazine

Snap-on 40” Shop Cart

The new Snap-on KRSC430 40” Shop Cart has a sliding lid with two new drawers to offer three levels of multi-purpose use.

The new Snap-on KRSC430 40” Shop Cart has a sliding lid with two new drawers to offer three levels of multi-purpose use. So long to flipping the lid to access tools and parts and hello to a larger workspace and more accessibility. The KRSC430 allows techs to work from the lid, drawers and inside the top all at the same time.

The sliding lid opens up to two utility drawers directly underneath that can be used to store and reach small parts, while still allowing access into the top compartment below for larger tools. Being able to work from the top in the drawers and top compartment simultaneously makes getting the job done a lot easier.

The KRSC430 lid comes in stainless steel or a bed liner coated surface. The lid moves independently on 120 lb. capacity ball bearing drawer slides creating a durable cart with smooth operation for tough shop conditions.

Beneath the lid’s drawers, the 5” deep top compartment leaves plenty of room to organize deep sockets, store power tools and charge batteries. The KRSC430 is pre-punched for two types of Snap-on power strips that are optional add-ons. This cart is tool-organization-ready for add-ons such as a slotted side panel, locking pry bar rack and folding shelf. Other optional accessories include a top work mat, power tool rack, trays and storage hooks.

The cart comes in 10 standard finish combinations with other color and trim options available. Shot-molded rubber/nylon corner bumpers protect the cart and surroundings, making it durable and good-looking in the shop for decades to come.

For more information: www.snapon.com

You May Also Like

Reid 426 Intake Roller Rocker Arms

Reid’s 426 intake roller rocker arm is for “high” ratio stand set ups.

rocker arms

Reid’s 426 intake roller is for "high'' ratio stand set ups. The 426 roller intake rocker arms with a 1.675" fulcrum length is available in ratios of 1.70, 1.75 and 1.80.

Reid machines, designs and manufactures its own line of racing products with an extensive background in drag racing in Top Fuel, Blown Alcohol, Injected, Fuel and Pro Mod classes, but also services a wide variety of motorsports applications.

Lucas Oil Fuel System Products

Preventive maintenance for fuel systems is just as important as regular oil changes.

ACL Race Series Performance Oil Pumps

ACL Race Series oil pumps are designed with high-output and high-volume capabilities.

ACL oil pump
UEM Icon 5.3L EcoTec3 L83 Gen V GDI Pistons

The piston line features forged 4032 alloy for NA and 2618 alloy for boosted applications.

UEM Icon pistons
CHE Ford Godzilla Trunnion Kit

The kit includes 16 heat-treated steel trunnions, 32 bronze bushings, and 33 retainer clips.

CHE trunnion kit

Other Posts

Rislone DEF Crystal Clean

First-of-its-kind product removes damaging crystals from SCR systems, clears P20EE codes.

Rislone DEF Crystal Clean
Pistal High Compression 100mm Drop-in Piston Kit

Made from forged aluminum, these Pistal pistons are both light and have high resistance.

Pistal pistons
B&B Performance Adjustable Billet Timing Pointers

Available for SBC, BBC and SBF, pointers come with stainless steel pointer, fasteners and a black anodized finish.

timing pointers
Holley Sniper 2 EFI

Holley’s Sniper 2 EFI ushers in a wide range of new technologies and features.

Holley Sniper 2 EFI