You searched for Chevy - Engine Builder Magazine
Twin-TorqStorm-Supercharged 454 cid Big Block Chevy Engine

It had been more than two decades since Val Morris of Steve Morris Engines was behind the wheel of a drag car. This Chevy Malibu with a twin-supercharged 454 big block Chevy engine was her forray into drag-and-drive, and now she wants to go even faster!

Steve Morris Engines’ Twin-Supercharged 454 Big Block Chevy Engine

It had been 26 years since the last time Val Morris, Steve Morris’ wife, was behind the wheel of a drag car. The shop had been working on this project car named Sugar Momma, and got it done in time for Sick Week 2024. When it came time to figure out who’d drive it, Steve

Summit Racing Big Block Chevy Hydraulic Roller Camshafts

Made in the USA from billet bearing steel and finished on Landis grinders, the cams have a 4/7 firing order.

ProCharged 5.000” Bore Space Billet Big Block Chevy Engine

One of the first 5.000″ bore space big block Chevy engines that Visner Engine Development has come out with in this new design, this billet engine was built by Nick Bacalis of Bullet Racing Engines for a 1971 C10 belonging to Michael Rieck. Check out what 4,000-plus horsepower looks like!

billet big block Chevy engine
Bullet Racing Engines’ 5.000″ Bore Space Billet Big Block Chevy Engine

We love when we get a chance to catch up with Nick Bacalis of Bullet Racing Engines. As the in-house engine shop for Larry Jeffers Race Cars, Nick is always working on high-horsepower, high-dollar builds for race customers, and this big block Chevy engine that we saw at the 2023 PRI Show is no exception.

Bullet Racing Engines Big Block Chevy engine
Point One Small Block Chevy Head Stud Kit

Point One’s E190 head studs boast an impressive 190,000 psi nominal tensile strength.

Cadillac Supercharged LS engine
3 Engines for Sale – LS3 and Two Small Block Chevys

John Nijssen of Stroker Engine Exports is selling three performance V8 engine builds.

760 cid Billet Big Block Chevy Nitrous Engine

Despite what you may think about nitrous engines, and those that are stock big block Chevy bore spacing, these 4.840″ bore space big block Chevy engines have some significant R&D in them. Just check out this 760 cubic inch billet version done at TRE Racing Engines.

TRE 760 cid Big Block Chevy Nitrous Engine

Last fall while we were in Houston, we made the drive out to Cleveland, TX to visit with Taylor Lastor, owner of TRE Racing Engines. His shop specializes in machine work and building big cubic inch drag race engines like this 760 cubic inch big block Chevy nitrous engine. Find out what goes inside it

Naturally Aspirated 540 cid Big Block Chevy Engine

After having issues with an engine built elsewhere, a customer came to H Squared Racing Engines to build him a streetcar combo. Utilizing an existing block and crank, H Squared was given the freedom to spec the rest of the engine. Check out the result!

Naturally Aspirated 800+ HP 540 cid Big Block Chevy Engine

We got a chance to visit with our pal Halston Harrist of H Squared Racing Engines in Houston, TX earlier in the year. Not only did he show us around the shop, but we got to hear the details of one of his latest engine builds – a 540 cubic inch big block Chevy that’ll

H Squared big block Chevy engine
L5P Duramax Swapped 1952 Chevy 3100

During this past year’s Ultimate Callout Challenge, there were plenty of awesome trucks on the track, but there were also cool trucks in the exhibitor area. Take Keith Porter’s Chevy 3100 for example. Keith did all the work on this truck himself, including swapping in an L5P Duramax engine with all the bells and whistles.

L5P Duramax
ProCharged 557 cid Big Block Chevy Engine

This is one of the most popular engine combinations at PAR Racing Engines. Built from 540 cid to 588 cid, this ProCharged 557 cid big block Chevy is a proven setup for Top Sportsman, Top Dragster and even drag-and-drive applications. Check out what makes this such a great build!

PAR Racing Engines’ 557 cid Big Block Chevy Engine

When we made a visit to PAR Racing Engines in Spartanburg, SC, shop owner Scott Duggins had a few engines to show us such as this 557 cubic inch big block Chevy engine he was getting ready to assemble. We got the details of the build in this episode of Engine of the Week!

632 cid Big Block Chevy Nitrous Engine

If you’re looking for a tried and proven big block Chevy combo that can make 150 passes without damage – look no further than this 632 cid big block Chevy nitrous build done by Pat Musi of Musi Racing Engines. It’ll deliver 1,250 horsepower NA all day long!

Pat Musi 632 cid Big Block Chevy Nitrous Engine

We couldn’t only highlight one engine while visiting Pat Musi and Musi Racing Engines earlier this summer in Mooresville, NC. This is one of Musi’s tried and proven 632 nitrous combinations for drag racing applications. It’s our Engine of the Week!

Comp Eliminator 347 cid Small Block Chevy Engine

Utilizing a unique block, a particular cylinder head and manifold combination and some parts from an old Pro Stock truck engine, Sandy Wilkins of Wilkins Racing Engines built his customer a 347 cid small block Chevy engine for Comp Eliminator that should make 2.88 horsepower per cubic inch! Check it out!

Wilkins Racing Engines’ 347 cid Small Block Chevy Engine

Stopping into Wilkins Racing Engines in Mooresville, NC was one of our favorite stops during our Charlotte trip earlier in 2023. Owner Sandy Wilkins showed us around his machine shop and gave us the details of a few engine builds like this Comp Eliminator 347 cid small block Chevy. It’s our Engine of the Week!

HED’s 540 cid Billet Big Block Chevy Engine

As drag-and-drive events continue to emerge and grow in popularity, more and more competitors are looking to up their cars’ performance levels on both the track and street. That’s exactly why this particular customer came to Pete Harrell and Harrell Engine & Dyno for a 540 cubic inch billet big block Chevy engine build. Check it out!

Drag-and-Drive Billet Big Block Chevy Engine

Pete Harrell of Harrell Engine & Dyno in Mooresville, NC specializes in forced induction builds and “polishing turds,” as he likes to put it. He got this build extra polished, as it features a 540 cubic inch billet aluminum big block Chevy block for drag-and-drive events. Hear what else went into the build directly from