Click here to close
Community Login
username:
password:
 
 

Serving Professional Engine Builders & Rebuilders Since 1964
Survey Results
Which import engine do you build the most?













 
10/21/2008
Click on a thumbnail to see the full-size image
Figure 1

Diagnosing Oil Leak on Ford's 7.3L Super Duty Truck Diesel Engine



 

Has anyone else experienced an oil leak around the oil pump outlet fittings on the Ford’s 7.3 Super Duty truck diesel engines?

Answer: Some 1998-2003 E-Series, 1999-2003 Super Duty, 2000-’03 Excursion and 2000-’03 F-650/750 vehicles equipped with a 7.3L diesel engine may exhibit an oil leak at the high-pressure oil pump outlet fittings and/or end plug.

According to Ford, this type of leak may appear to be a rear main crankshaft seal, oil pan gasket or other engine oil leak due to the drain hole machined in the crankcase valley which allows any oil in the valley to run down the back of the engine (see Figure 1).

High-pressure oil pump leaks at the outlet fittings and/or end plug can be serviced without removing the pump assembly. Replace the

O-rings on the fillings and the end plug using kit 2C3Z-9G804-AA. All three O-rings should be replaced. Apply liquid thread sealer (included in the kit) prior to reinstallation.

Note: Do not remove the bottom plug — it is sealed in a different manner.

 

Additional Tech Tips>>


Comment on this article:
 
A Forgotten Decade: Identifying Cadillac Cylinder Heads From The 1980s
It is easy to lose sight of valuable information from the past. No, I am not talking about the '50s and '60s, although that may be an idea, but what seems to be the forgotten '80s. So much changed during the 1990s, and the proliferation in the new millennium with electronic controls (both engine and transmission) and, of course, OBD have moved us ahead at a breakneck speed....

Valve Timing Basics
In an effort to simplify what actually happens inside an engine, we will discuss valve events, piston position, overlap and centerlines....

Rattle or Knocking Noise from Audi Camshaft Adjuster at Cold Start
A rattle or knocking noise has been reported coming from some 1997-2004 Audi camshaft chain tensioners or camshaft adjuster units during a cold engine start....

Cylinder Head Oil Gallery Cup Plug Service for Chrysler 2.7L Engine
This bulletin provides service information for 1998-2002 Chrysler 2.7L engine cylinder head oil gallery cup plugs....

Eliminating The Low Oil Pressure Gremlin
This solution has been the most effective in solving a problem that seems to creep up for every engine builder everywhere....









Engine Builder is a Babcox Publication
3550 Embassy Parkway
Akron, OH 44333
330-670-1234 • (FAX) 330-670-0874