Print

Email

Click on a thumbnail to see the full-size image

Apply a small quantity of sealant p/n AMV 174 004...

Apply a small quantity of sealant p/n AMV 174 004...

Sealing Audi 1.8T Valve Cover Gasket at Critical Points

To prevent oil leaks on Audi 1.8T engines after the valve cover gasket has been replaced you must use the following procedure.

Cylinder Head Cover Gasket Installation

Before installing a new Cylinder Head Cover Gasket, it is necessary to apply a small amount of sealant on six criticai transition points of the sealing surface of the cylinder head.

Before new sealant is applied old sealant and oil residues must be removed (sealing surface must be thoroughly cleaned).

Seal the transition points between double bearing cap and cylinder head (2 points):

• Apply a small quantity of sealant p/n AMV 174 004 01 to sides of joints (arrows) on upper sealing surface of cylinder head.

Sealing camshaft adjuster/cylinder head transition (4 points):

• Apply a small quantity of sealant p/n AMV 174 004 01 to sides of joints (arrows) on upper sealing surface of cylinder head.

Apply sealant before installing any gaskets.

Some or all of this information was provided by the Automotive Parts Remanufacturers Association (APRA). For more information on technical bulletins available through APRA call 703-968-2772 or visit www.AutoBulletins.com.