Company: Racing Head Service
Click on a thumbnail to see the full-size image
Indy 360 X Cylinder Heads for Mopar Applications
RHS and Indy Cylinder Head team up to develop cast iron heads for Small Block LA & Magnum engines
Thanks to the combined efforts of RHS and Indy Cylinder Heads, Mopar enthusiasts will finally get the performance small block head they deserve. A cast iron replacement, the RHS Indy 360 X Head series is designed for both Small Block LA and Magnum applications (318- 360-415cid). With a host of additions and improvements over the factory originals, these heads are an easy way to get 400 to 550 horsepower out of your Mopar-powered street machine.
Features of these impressive heads include 179cc intake and 67cc exhaust runners, a 62cc combustion chamber, hardened multi-angle intake and radiused exhaust valve seats, an improved valve guide design and a highly efficient water jacket to prevent engine hot spots. The RHS Indy 360 X Cylinder Heads also come with an extra thick deck surface to enable angle milling for compression. The 360 X series is divided into two sub-series: the LA-X for Chrysler LAstyle engines and the MA-X for Magnum applications.
The LA-X head uses the standard intake manifold and rocker shaft. It is drilled for the proper valve cover and gasket and contains both Chrysler LA and Magnum accessory holes on both ends of the head. Designed for use with the Magnum intake manifold, rocker arms, and valve covers, the MA-X head is the second option of the RHS Indy 360 X series and features a Magnum pedestal that is large enough to enable 7/16”-14 drilling and tapping for use with studmounted rocker arms and guide plates. Both sub-series are designed for use with 8mm intake (1.92” diameter) and exhaust valves (1.625” diameter).
Product: RHSTM Indy 360 X Cylinder Heads
Part Number: #20300 (MA-X); #20301(LA-X)
Features & Benefits:
Performance heads available for both Small Block Chrysler LA & Magnum engine applications
179cc intake/67cc exhaust runners & 62cc combustion chambers
Hardened multi-angle intake (1.92” dia.) & radiused exhaust (1.625” dia.) valve seats
Dual pattern exhaust bolts (standard & W2) & improved valve guide design
Highly efficient water jacket with extra thick deck faces
For additional information visit www.racingheadservice.com.
Racing Head Service
3416 Democrat Rd. * Memphis, TN 38118
Phone: 1-877-776-4323 * Fax: (901) 368-1951