Click on a thumbnail to see the full-size image
World Product’s Merlin X has characteristics comm...
Patriot Performance’s Freedom Series BBC heads co...
Edelbrock RPM Xtreme heads feature a CNC ported c...
RHS BBC Pro Action and Pro Elite heads utilize st...
Choosing Aftermarket BBC Cylinder Heads for Street/Strip Applications
Page 2 of 2
Air Flow Research
AFR has released an all new 375 cc Magnum Series BBC head, the largest and highest flowing BBC product in its line-up with flow numbers that are closer to 18 degree Pro-stock style heads. If you’ve got the displacement AFR’s head can feed it with an intake port that flirts with 440 CFM at a usable lift-point, and enough complimenting exhaust flow to still maintain over 75% of that number at .800˝ lift (335 CFMs at .800˝ lift). While this runner is more aimed at 572 632 cid applications, in a light car it could still be considered in 555-565 cid aggressive builds that are built to reliably turn 7,800 8,500 rpms (Ti valves are recommended over 8,000 rpms). The company explains this head will be best utilized with camshafts in the .780˝ - .850˝ range to take full advantage of its higher lift airflow. But this head also provides low and mid-lift flow as well (400+ CFM at .600˝ lift). This head comes with a .750˝ thick head deck, reinforced rocker stud bosses, and is equipped with 2.350˝ intake/1.880˝ tulip exhaust valves.
RHS Cylinder Heads
RHS’s Kevin Feeney echoes what other experts have said about selecting BBC cylinder heads the first step is to determine what your customer is trying to accomplish with the engine: torque/hp or the best combination of the two. This and the size of the engine are vital to choosing the proper runner volume for your application. In too many instances, says Feeney, racers tend to purchase cylinder heads based on high lift flow numbers that are easily achieved with large ports and valves but do not necessarily provide them with the performance they are looking for.
In most street strip applications, you are dealing with a heavier vehicle and in most cases an automatic transmission, which would benefit from a smaller runner with cross section that maintains port velocity to provide a strong torque curve to get the vehicle off the line and good high lift airflow for horsepower. When using a conventional BBC head the combustion chamber size is fairly standard and the head can be milled to achieve the compression ration desired, he says.
The RHS BBC Pro Action and Pro Elite BBC heads utilize stock rocker arms, intake and exhaust manifolds. The only special requirement is 4 longer head bolts or studs on the exhaust side of the head to accommodate the raised exhaust port required to overcome the restriction inherit in the OE design. “ Our as cast and CNC heads are ready to use right out of the box and are available assembled in a variety of valve spring and retainer options,” says Feeney. “Port matching of the intake manifold is always recommended to ensure a smooth transition from the manifold to the head and eliminate the airflow being disrupted before it enters the cylinder. Ideally you want the manifold to be slightly smaller than the head.
RHS’s most popular head is one that is ready to assemble or install without additional machine work required, according to Feeney. “We are finding a trend towards the purchase of assembled cylinder heads and believe this has a lot do to with us providing a head utilizing Comp Cam brand components that can be tailored to their camshaft requirements verses buying a one size fits all part with generic components.”
Feeney says the heads are designed to use a 14mm .750˝ reach gasketed plug which provides the engine builder with a variety of heat range options. He recommends a conservative approach, starting with a little colder plug to begin with and then move to a hotter plug if your combination and tune requires it.
Feeney also recommends using an adjustable checking pushrod to determine the length that provides the best valve train geometry during assembly. “Our complete package can be an excellent option for some, versus just bolting on a set of new heads. We find that when engine builders work with one of our techs to put together a cylinder head and camshaft package that fits the vehicle and application instead simply buying a cylinder head that has the highest flow numbers, they have the better chance of meeting their customer’s expectations.”
The all-new MERLIN X Aluminum BBC Heads from World Products combine flow characteristics common to expensive race-only heads with exotic splayed valve setups designed to accept up to 2.350˝ and 1.880˝ valves, as well as “standard” Mark IV intake systems. This has been accomplished through “rolling” the head to a 16° valve angle, designing highly efficient intake and exhaust ports and using a special 90cc combustion chamber. According to World, you’ll probably need to get a set of pistons that take advantage of the chamber design, but other than that you can use most of everything from a standard big block Chevy, so when you add up the performance potential versus total cash outlay, it can make sense to your Sportsman racer customers.
The RPM Xtreme for big-block Chevy is an all new design that is CNC ported to achieve optimal air-flow for maximum horsepower and torque in high performance street and light duty racing applications. The casting and port design are all new and engineered to be as close to perfect as possible. To ensure consistency from port to port, the RPM Xtreme has a CNC ported combustion chamber, and then CNC ported in the bowl area (above the valve) for a smooth transition into the valve seats.
The intake runner entries and exhaust runner exits are partially CNC ported for improved air-flow. RPM Xtreme big-block Chevy heads have a 24.5° x 4.4° intake valve angle, 15.5° x 4.2° exhaust valve angle, stock exhaust port locations, and the spark plug angles have been modified to produce a smooth flame front for increased fuel efficiency and maximum power. Two port designs are offered, a 300cc Oval and 325cc Rectangle. Both options are equipped with high-quality valve springs for valve lifts of up to .700˝.
Edelbrock’s Big Victor Spread-Port 18° CNC cylinder head is intended for high output, large cubic inch BBC racing engines with 4.84˝ bore spacing, this new head is an improvement over existing 18° designs. The casting is made from A-356 aluminum and is Hot Isostatic Pressing processed (HIP) for superior strength and durability, dimensional stability, and exceptional finish quality.
These heads feature CNC ported spread intake ports and raised exhaust runner design for improve flow efficiency. The chambers are also fully CNC ported and Edelbrock includes extra material in the deck to allow fine tuning of the combustion chamber design if desired.
Patriot’s Freedom Series heads meet the demands of the BBC world, while keeping the quality high and the price reasonable. Patriot’s BBC heads come as cast with a 320cc intake runner, US made bronze guides, and a 5 angle valve job. Chevy High Performance used these to build their 675 hp 496. These heads come standard with a 119cc chamber, assembled in Patriot’s own facility with 21-4N stainless 2.250˝/1.880˝ valves, .600˝ hydraulic roller springs, steel retainers, 7/16˝ studs, guide plates, and Viton seals.
Trick Flow’s Al Noe says you do not want to use a 360cc intake port on a 396 cid street engine or a 280cc oval port on a 632 cid drag race engine. Valve size will increase appropriately with port size. Trick Flow makes a 280cc oval port, and 320cc or 360cc rectangle port cylinder heads specifically so that engine builders can pick the right cylinder head for their application. You also want make sure that the spring and retainer package is matched appropriately to what the customers needs are. Noe says Trick Flow offers numerous spring and retainer packages for a number of applications, and can also custom tailor a spring/retainer package to suit a customer’s particular needs.
Another key thing to look at are the components a manufacturer will use. Noe says they use only American made A356 castings. “They are machined in-house at our facility, with the best components available to produce an extremely durable, high quality product. While there certainly are less expensive ‘generic’ heads available, they’re typically cast from ‘mystery metal’ using inexpensive components. Even though a customer may save a few hundred dollars, if the engine drops a valve because of cheap component breakage, in the long run the few hundred they save ends up costing them thousands. We build an excellent performing product at a fair price, and we’re proud to provide excellent customer service before, during, and after the sale.”
Noe says TFS heads come with a 3 angle valve job done on a Serdi. Both intake and exhaust are CNC bowl blended, and the intake ports are CNC port matched. Assembled heads are most popular, says Noe, because you can take them out of the box and bolt them on. With the numerous spring packages and retainer options, customers can bolt them on and go with no need for spring changes, retainer swaps, etc. TFS also has three spring packages from 1.530 diameter for flat tappet cams to 1.640 diameter for solid roller camshafts.
Big block TFS heads have a rectangular port intake manifold with dominator flange set up for drag racing. “Our sales-tech department can custom select parts for your application,” says Noe. “And we have literally hundreds of different combinations we have tested over the years, which will help in selecting the right parts for our customers. Having two Superflow engine dynos in house makes us do the work rather than the customer when it comes to proper parts selection.
Noe says Trick Flow dyno tests every product it sells. “In developing our Big Block Chevy cylinder head line, we wanted to focus on areas which would deliver great value to our customers-CNC port matched intake ports, CNC bowl blends, American Made castings, and the best possible components available. Our heads deliver great bang for the buck! Since we develop and test all of our own products in house, we also have a very good understanding of what will and what will not work, and are happy to help our customers build an excellent combination which will make great power while being low maintenance.”
More Most Read Articles...
Page 2 of 2