Click on a thumbnail to see the full-size image
Revised Timing Belt Tensioner for Acura 3.2L Engine
Installers should note that the revised tensioner should be identified by a punched mark above the sixth digit of the engine compartment VIN code.
A revised timing belt auto-tensioner for 2002-2003 Acura 3.2L engines is now available (P/N 14520-P8E-A01). This tensioner is part of a product improvement by Acura.
The original design timing belt tensioner is filled with oil to dampen oscillation. Due to a manufacturing situation, the tensioner oil can leak. If enough oil is lost, the timing belt loosens and causes engine noise. The worst-case scenario is the belt may lose tension and allow the loss of cam timing. Refer to the chart (Figure 1) to determine which vehicles are affected.
Do not replace the timing belt because it has oil on it from the auto-tensioner or because you see belt dust after removing the engine upper covers. Residual oil from the auto-tensioner and dust from minor belt contact with the inner edge of the camshaft pulleys does not affect timing belt performance.
Secure the timing belt to both cam pulleys using plastic wire ties. This helps to keep the timing belt in place while you replace the auto-tensioner (Figure 2).
Some or all of this information was provided by the Automotive
Parts Remanufacturers Association (APRA). For more information on
technical bulletins available through APRA call 703-968-2772 or visit www.AutoBulletins.com.