Click on a thumbnail to see the full-size image
Piston Ring Selection In Chrome Plated Cylinders
Chrome plated cylinder liners are being used in increasing amounts both by original equipment manufacturers, and by aftermarket sources.
It is recommended that chrome plated rings not be installed in chrome plated liners under any circumstances. Catastrophic destruction will likely result. Plain cast iron-manganese phosphate coated, or molybdenum rings may be used. It is normally difficult to detect visually in a used cylinder if it is chrome plated or not.
If any doubt exists, a solution of copper sulfate (CuSO4), which can be purchased at any drugstore or chemical supply house, should be applied with a cotton swab to an area of the liner. If the liner is not plated, a copper color will appear. If it is chrome plated no change will take place. Never use chrome in chrome.
Cylinders are normally chrome plated for two reasons. To increase service life or to re-furbish worn liners.
-Tech Tip courtesy of Hastings Piston Rings