Serving Professional Engine Builders & Rebuilders Since 1964




Survey Results
What is your prefered way to read Engine Builder?









 
2/3/2012
Click on a thumbnail to see the full-size image
Company: Rivera Primo
www.riveraprimoinc.com


Motorcycle Belt Drive System



Brute III Extreme 2007 Touring 1 3/4˝ Enclosed Belt Drive Fits 2007 and Later Touring models.

 

Rivera Primo's new Brute III Extreme 2007 Touring Enclosed Belt Drive for 2007 & later V-Twing Touring motorcycle models will eliminate leaky gaskets and oily messes and so much more. In addition, replacing a chain drive will shedding your drive train of approximately 25 lbs of unwanted rotating mass. This will make your engine work more efficiently, utilizing more of your horsepower to spin the rear wheel and much less to just turn the primary drive.

 

Years of engineering and on-bike testing have enabled Rivera Primo to produce a state-of-the-art high strength 8mm primary drive belt. Layers upon extra layers of Aramid fibers makes the Brute III Extreme 2007 Touring one of the most durable enclosed belts & drive available today.

 

The Brute III Extreme 2007 Touring comes standard with Rivera Primo’s Pro Clutch™. It holds the power with ease, but does not break your arm doing it. It is a diaphragm clutch, which means it uses one cupped piece of spring steel to put equal all around pressure on the pressure plate. Antiquated clutches of by-gone eras used multiple coil springs and many other parts to put the pressure against the pressure plate. However, the coil springs did not all have the same rate of collapse, so the pressure plate did not have an even distribution of pressure, plus the more you collapse a coil spring to put more pressure on the pressure plate, the harder it is to pull in the clutch lever. Diaphragm springs have a mechanical advantage over coil springs and are much easier to pull in.

 

For information visit www.riveraprimoinc.com.

 












Babcox Media • www.babcox.com
3550 Embassy Parkway
Akron, OH 44333
330-670-1234 • (FAX) 330-670-0874