You searched for Welding - Page 2 of 16 - Engine Builder Magazine
Speedway Motors Unveils New State-of-the-Art Machine Shop in Lincoln, Nebraska

“Speedway Motors is growing in Lincoln. Our new manufacturing facility allows us to produce more quality products right here in Lincoln,” said Clay Smith, president and CEO of Speedway Motors. “We are proud to have a team of talented people designing, engineering and building affordable parts to serve our customers.” The new state-of-the-art machine shop

Triple-Turbo 6.6L LLY Duramax Engine

The LLY Duramax often catches some flak for having overheating issues, but that doesn’t stop some people from using it in their one-off diesel builds. Thomas even went as far as putting triple-turbos on his engine!

Circle D Specialties’ Ford HP Series 10R80 Torque Converter

Options are available to accommodate a wide variety of engine, power-adder and vehicle setups while retaining streetability.

Turbocharged 7.3L Powerstroke Engine

Every year, there’s hundreds of diesel trucks at the Ultimate Callout Challenge. As expected, most feature 6.7L Cummins engines, but that’s what makes seeing a Powerstroke build that much more special – let alone a 7.3L. We were able to find one built and owned by Corey Hurtts of CNC Fabrication. Check it out!

Strange Engineering Founder Bob Strange Has Died at 84

Henry Robert “Bob” Stange, the founder of Strange Engineering, has passed away at the age of 84. Strange Engineering, in Morton Grove, IL, manufactures performance and racing components. After welding drag racing components to support his racing hobby for years, Stange founded Strange Engineering in 1964 with his then-wife Shannon. “His friends recall him sitting on the

May Shop Solutions 2023

Engine and machine shop tips and tricks.

1,400-Horsepower Turbocharged LB7 Duramax

Since 2019, Daman Perry has been building up his diesel performance shop DP Customs. To show off his work, he’s been continually upgrading his 03′ Duramax truck, complete with a 1,400 horsepower LB7 to boot. Check it out!

Mahle 7.3L Godzilla PowerPak Piston Set

Available both in a 4.221” or 4.225” bore size, the new Godzilla PowerPak piston set is available wherever MAHLE Motorsport performance piston sets are sold.

MAHLE Motorsport Introduces New Small Block Chevy Dish PowerPak Piston Set

MAHLE Motorsport’s SBC Dish PowerPak pistons are available either in a 2618 alloy or 4032 alloy, the kit comes complete with a 1.0, 1.0, 2.0mm file fit performance ring set, pins, and clips.

All Things Media Blasting

Engine building is a segment of the automotive industry that has always been ahead of the curve in media blasting, and no matter the engine shop, cleaning equipment is a common bond.

Nitrous-Powered 478 cid Big Block Chevy Engine

Jason Chapman’s 1968 Camaro SS features a nitrous-powered 478 cubic inch big block Chevy engine complete with a Benjamin Franklin $100 wrapped intake manifold. See what else Jason has in this engine build!

Mahle 2.0L PowerPak Piston Set for Ford ZX3 Engine

MAHLE Motorsport has introduced a high-performance 2.0L PowerPak piston set approved for SCCA competition for racers competing with a Ford ZX3 engine.

NASCAR Technical Institute Welcomes New Campus President

 Universal Technical Institute’s (UTI) Mooresville, N.C. campus, NASCAR Technical Institute (NASCAR Tech) is pleased to welcome Robert (Bob) Kessler as its new Campus President. Kessler comes to NASCAR Tech with more than a decade of senior leadership experience at UTI. He comes from Exton, Penn., where he’s been campus president at UTI-Exton for the last 12 years. He

MAHLE Motorsport 2.0L PowerPak Piston Set for the Ford ZX3 Engine

The pistons, weighing in at 307 grams, are dual coated with Phosphate to prevent micro-welding in the ring grooves and pin galling, and MAHLE’s GRAFAL® anti-friction skirt coating to reduce drag.

piston_edit
Victory 1 Performance Titanium Valves

Victory’s titanium valves have been a mainstay in the racing industry for over two decades in applications such as drag, dirt, oval, marine, karting, Formula 1, road racing, and more.

Ford HP Series 10R80 Torque Converter

This converter is based off the original factory converter paired with our CNC’ed Billet Stator and Impeller modifications.

Iron Rod – a 1947 Federal with Dual Cummins Engines

WelderUp owner and TV personality Steve Darnell went to great lengths to build this vintage 1947 Federal welding truck, which has a 5.9L Cummins under the hood and a 4BT Cummins powering a Lincoln SA200 welder in the bed. This truck defines power in the front and utility in the back. Check it out!

MAHLE Small Block Chevy 23-Degree USRA Factory Stock PowerPak Piston Kit

MAHLE’s new 23° SBC forged pistons for USRA Factory Stock are manufactured from high strength 4032 aluminum alloy and have a four equal valve relief design.

MAHLE_pistonkit.jpg
MAHLE Motorsport Introduces Small Block Chevy 23° 

MAHLE Motorsport announces a Small Block Chevy 23° USRA Factory Stock PowerPak Piston Kit designed to meet all USRA Factory Stock rules.

NASCAR Technical Institute Celebrates 20 Years of Skilled Trades Training

Universal Technical Institute’s Mooresville campus, NASCAR Technical Institute, is celebrating its 20th anniversary this month.