Engine Assembly Archives - Engine Builder Magazine
Take a Tour of PAR Racing Engines

During a recent trip to Spartanburg, SC, we had the opportunity to stop in PAR Racing Engines, a well-known race engine and machine shop owned by Scott Duggins. Scott showed us around and we definitely came away impressed.

Assembly of a Steve Morris Engines SML for Jason Sack – Part 2

Machine work and sleeving has been completed on Jason Sack’s SML engine. Now Steve and his crew at Steve Morris Engines gets the engine assembled.

EB Takeover: Gawlik-SGRO Racing

We first met Brian Gawlik of Gawlik-SGRO Racing at the PennGrade1 booth during the 2022 PRI Show. We struck up a fun conversation and knew we’d be talking to Brian again soon. Brian is the owner, and driver for the Gawlik-SGRO Racing team, which competes in the Division 1 NHRA / Lucas Oil Series Top

Dream Engine Giveaway Ep. 4 – Bottom End Assembly

Now that Chris has checked all our specs, we begin to assemble the bottom end components of our small block Ford such as the rotating assembly, main and rod bearings and the camshaft. Next episode, we will be getting into our cylinder head assembly and more of the valvetrain components. Thanks to our Component PartnersWorld

SWEPCO Engine Assembly and Break-In Oil

SWEPCO 350 Engine Assembly and Break-In Oil is designed to provide superior protection and performance during those first critical miles of a new or rebuilt engine.

Right to Assemble – Assembly, The First Amendment to the Constitution

The right of the people peaceably to assemble, and to petition the government for a redress of grievances. It is often forgotten that the First Amendment to the Constitution of the United States gives the American people, including persons in the automotive industry, the rights to peaceful assembly and to petition the government for redress

Assembly Lubes & Break – In Oils

Perhaps the most important property of lube oil is its ability to remove heat from a surface where two or more metals are sliding across each other. In much the same way as air flows around cylinder head fins to remove heat, oil flows through a bearing and removes the heat caused by friction. I

A Better Way to Install Rods on Pistons

Installing spiral locks into a performance piston can be a pain. This tool can make your life a lot easier when it comes to building performance engines.