The Agricultural [Engine] Market - Engine Builder Magazine

The Agricultural [Engine] Market

This good news for farmers trickles down to other businesses involved in agriculture such as the implement dealers and manufacturers of farm equipment. While 2009 tractor sales are expected to be down about 20 percent, combine sales are expected to be up nearly that same amount. Used tractor sales are also seeing an increase of around 20 percent with a corresponding increase in prices, a sure sign of the increased demand for used equipment.

While you will probably not see much work from the newer models of tractors, other than maybe some warranty work for the manufacturer or dealer, the increased demand for used equipment should be welcome news to all of you. While you will seldom get engine work on the new tractors, the used equipment does need you. If you aren’t already servicing this market, now is the time to get out there and cultivate some new customers.

Most Ag equipment is never retired; it continues to be used on the farm. It is not uncommon to see tractors that are 50 years old or older still being used regularly in rural areas. While the smaller models may be relegated to a utility job, the larger models are still being used regularly in the fields. They will all need your services sooner or later.

For instance, two of the more popular tractors ever produced were the John Deere 4020, and the International 1066. You will still see these and similar models being used on a large percentage of farms these days.

The 4020 was manufactured from 1963 until 1972 and John Deere produced and sold 57,000 of them. Think about it, even if you have one of the last models produced, it is still more than 35 years old! This model was produced with gasoline, diesel and propane fueled engines. Although the propane model was not produced after the late ’60s, I have seen them still working.

The 1066 was produced from 1971-1976 and was only available as a diesel. International produced 55,000 of them and I bet most are still out there working away. After more than 30 years, these tractors are still going strong.

These are just two of the more popular models over the years, but there are dozens more. They all have a few things in common; they are 20-50 years old, they are well designed and manufactured, and, they need a shop like yours at one time or another to keep them in tip-top shape.

While the motorsports market could go away (though not likely), the agricultural market will always be here, it is a necessity. The world population is expected to increase by more than 20 percent by 2025. Food production will need to increase 50 percent by 2025 and is expected to double by 2050.

The increase in population and the corresponding increase in food needed to feed this growing population will mean agricultural machinery will be needed to help meet this demand. The equipment to plant, grow, and harvest this food will continue to be needed in ever increasing numbers.

But, you also need to remember that the equipment used on the farm is just a small percentage compared to the overall agricultural market. There are many other “agri-businesses” that also use equipment powered by an internal combustion engine. And, even if you look at “just farms” the diversity of equipment is tremendous and where you are located in the country, determines the type of equipment you might see.

There are dozens of other agri-businesses out there that also use Ag-type equipment. It could be a fertilizer application company that uses those big three-wheeled Terra Gators we have all seen zooming across a field. It might be that cotton picker, cotton stripper, or cotton gin in West Texas, or it could be a self-propelled swather such as a Massey Ferguson 9000 Series with a Cummins 110 hp engine.

You could also include the power units that run irrigation pumps in the South or the pivot irrigation sprinklers in the West. Or how about the engines that run emergency generators for poultry and hog operations.

Agriculture in the United States generally falls under the following commodities: Animal products that would include aquaculture; cattle/beef; dairy; hogs/pork; poultry and eggs; and sheep/lamb and mutton. Crop commodities would include corn and feed grains; cotton and wool; floriculture and nursery; fruit and tree nuts; peanuts; rice; soybeans and oil crops; sugar and sweeteners; tobacco; vegetables and melons; and wheat.

Just browsing through that list of commodities show just how diverse agriculture is. Different methods, equipment and practices are used depending on where or what the commodity is. Just read the list and imagine the diversity of equipment needed to plant it, grow it, harvest it, get it to market and everything in between. But, while the equipment may be different, internal combustion engines power much of it.

As a machine shop, you may also have the ability to solve a “problem” that some equipment may have. In motorsports, we tell you to get out to the track to find out what the racers need. For local farmers, that could mean getting out to the local diner where many congregate early in the morning. Remember, if you don’t understand the problems they may be having, you can’t solve them. Because of the age of some of this equipment, you may get the opportunity to manufacture parts for particular needs.

While most farms continue to extend the lives of their tractors for many years, they also use grain trucks until they rot out from under them. Although it is changing, for the most part, the small farmer that takes his crop to the local elevator may be using a truck that is 40-50 years old. These trucks may only be used during harvest and maybe planting season. Most probably put less than 1,000 miles a year on them. They may look rough, but they will be mechanically sound with help from a shop like yours.

Not Just Tractors Down In Farmville

Depending on where you’re located, you may never work on a farm tractor or farm tractor engine. If you’re located in a big city, you could be seeking out work in other agri-businesses. Trucks, trains and ships are all used to transport farm commodities.

Are you located near a shipping port? Maybe you have expertise working on ship engines or the tractors and other power equipment used in a port. If you’re near a rail yard, remember, trains use an internal combustion engine to run the generators that power the electric motors that power the train.

Trucks can be found virtually anywhere in the country. If you don’t already have some experience with diesels, perhaps it’s time to go back to school. In fact, if you don’t know diesels, you might simply need to forget about this market. While you might see some gasoline engines in 30-40 year old equipment, anything these days over about 20 horsepower will be a diesel other than maybe some lawn and garden equipment. For sure anything over 40 horsepower will be diesel powered.

Along with the industry moving to diesel power the last 20 years or so, manufacturers are also making the engines much more efficient, AND, nearly bulletproof. These new engines will run 6,000 hours or more before you even need to think about looking inside them.

Although not strictly the “agricultural” market, another segment that is keeping many shops busy is rebuilding the engines from 60-70 year old antique tractors. Many of these tractors are restored to better than new condition by their owners and while some enthusiasts have the expertise for some of the restoration, most need to seek a professional for the engine rebuilding and/or machine work.

The antique tractor collector industry has grown tremendously in the past 20 years and continues to grow. Many of these tractors are used in antique tractor pulls and their owners spare no expense in their attempt to win. I have heard figures of $25,000 plus for competition pulling engines in John Deere B and Oliver 88s. There are shops out there specializing in the antique pulling market that have 12-month backlogs.

There are many related businesses that you might never consider an agribusiness. Like the products it produces and supplies, the vehicles used in the agricultural market are extremely diverse. Of course the bottom line is this: if it has an internal combustion engine, then it is a market you should be cultivating.

Jim Walbolt, a professional writer and photographer covering motorsports and rural activities, is from Custar, OH. You can reach Jim by email at [email protected]. The increase in population and the corresponding increase in food needed to feed the growing population will mean agricultural machinery will be needed to help meet this demand in the years ahead. Agriculture in the U.S. is made up of a very diverse group of commodities. Different methods, equipment and practices are used depending on where or what the commodity. But, while the equipment may be different, internal combustion engines power much of it.Trucks may only be used during harvest and maybe planting season. Most probably put less than 1,000 miles a year on them. They may look rough, but they will be mechanically sound with help from a shop like yours.Most Ag equipment is never retired; it continues to be used on the farm. It is not uncommon to see tractors that are 50-years old or older still being used regularly in rural areas. While the smaller models may be relegated to a utility job, the larger models are still being used regularly in the fields. They will all need your services sooner or later.If you don
</p>
</p>
	</div><!-- .entry-content -->

		<div class=

You May Also Like

The Road to AAPEX Season 2, Ep 1

Last year, the idea was simple: Find a junker, fix it up with the best from the automotive aftermarket, and drive it to Las Vegas for AAPEX 2022. This year, it’s anything but simple. The automotive aftermarket is at the crossroads of change. Electric vehicles, driver assistance systems, autonomous vehicles, sustainability—it’s a shifting landscape. This

Last year, the idea was simple: Find a junker, fix it up with the best from the automotive aftermarket, and drive it to Las Vegas for AAPEX 2022. This year, it’s anything but simple.

The automotive aftermarket is at the crossroads of change. Electric vehicles, driver assistance systems, autonomous vehicles, sustainability—it’s a shifting landscape. This year, the Big Bosses at AAPEX, Bill Hanvey, president and CEO of Auto Care Association, and Paul McCarthy, president and CEO of MEMA Aftermarket, offered a challenge. Babcox Media’s Joe Keene, an ASE-certified technician, couldn’t refuse: Find and fix a rare Lincoln Blackwood and drive it down the Lincoln Highway to AAPEX 2023.

What’s a Ford Sidevalve Engine?

It looks like an ordinary inline 4-cylinder flathead engine. Essentially it is, but it has quite a cult following here in the UK.

The Drag & Drive Revolution

Following that first drag-and-drive event back in 2005, spinoffs of Drag Week have been happening all over the country, and the world, both large and small. In recent years, the trend has been completely blowing up!

The Evolution of Pro Mod Diesels

The advancements within the performance diesel world over the past 20 years have been nothing short of phenomenal. In fact, within just the last five to 10 years, that progress has been even more rapid and impressive, but few progressions have been more astonishing than those within the Pro Mod Diesel realm.

Top Fuel and Funny Car Engines

They’re the pinnacle of drag racing, and the engine builders, crew chiefs and teams who make these cars function at peak performance all season long are looking at every single area of the engine and the car to make it down the track as fast as possible.

Other Posts

Race Oils

Choosing the correct performance racing oil is essential to ensure optimal performance and longevity of your engine.

Facts About Engine Bearings

The experts all agree that cleanliness is the most important factor during installation, and the lack thereof is the most common problem that leads to bearing failure. But measuring is just as critical.

Does Connecting Rod Length Matter?

Over the years, we’ve gotten asked numerous times about connecting rod length and the impact that has on an engine’s horsepower and durability. As it turns out, this question is often overthought. It’s not so much the connecting rod length that matters as much as it is the correct piston pin height. The connecting rod

LTR Engine Build

This Late Model Engines build is centered around Concept Performance’s new LTR block, which is the first aftermarket as-cast aluminum Gen V LT block.