J.D. Power and Associates Reports: EPA Emission-Compliant Truck Engines Increase in Problems, Decline in Satisfaction - Engine Builder Magazine

J.D. Power and Associates Reports: EPA Emission-Compliant Truck Engines Increase in Problems, Decline in Satisfaction

Now in its 16th year, the J.D. Power study measures satisfaction with engines and transmissions among primary maintainers of heavy-duty (Class 8) trucks that are one model-year old. Satisfaction is measured based on eight key factors: engine reliability and dependability; engine warranty; acceleration when fully loaded; electronic control module; accessibility to components for service or maintenance; vibration at idle; maintaining speeds on grades; and average fuel economy.

 

Technology designed to reduce emissions and make heavy-duty truck engines compliant with the 2010 EPA regulations is resulting in more heavy-duty truck owners experiencing problems with the engine, the J.D. Power study finds. According to the results, 46 percent of owners of heavy-duty trucks that are one model-year old report experiencing some type of engine-related problem, up from 42 percent in 2011. The most commonly reported engine problems are issues with the electronic control module calibration (cited by 23 percent of owners who experienced an engine problem), exhaust gas recirculation (EGR) valve (20 percent) and electronic engine sensors (16 percent).

 

In addition, the average number of engine- and fuel-related problems has increased to 81 problems per 100 vehicles (PP100) from 71 PP100 in 2011. The rise in problems has impacted overall engine satisfaction, which declines to 719 index points on a 1,000-point scale in 2012, compared with 739 in 2011.

 

"At the industry level, the new, more complex engines designed to meet EPA regulations are resulting in additional problems and downtime, which also has a financial impact on owners because they’re not making money when their truck is down for service," said Brent Gruber, director of the commercial vehicle practice at J.D. Power and Associates.

 

However, Gruber adds, once manufacturers resolve quality issues related to the new technology, customers may expect to see some added benefits from the new engines. In the on-highway segment, the average reported engine service interval has increased to 22,703 miles in 2012, up from 20,303 in 2011. Additionally, maintainers of heavy-duty on-highway trucks report a 4 percent increase in fuel efficiency this year, averaging 6.3 miles per gallon (mpg) in 2012, compared with 6.0 mpg in 2011.

 

"The new engines are proving to be more fuel-efficient and allowing greater up-time between service, so despite initial quality issues, the new technology may offer a greater return on investment in the long-run," said Gruber.

Overall satisfaction with heavy-duty truck transmissions averages 812 in 2012, down eight points from 2011. The decline is largely attributed to lower satisfaction with the reliability and dependability of the transmission and drivetrain. This decline in satisfaction comes despite transmission-related quality actually improving to 7 PP100 in 2012, down from 10 PP100 in 2011.

 

The 2012 U.S. Heavy-Duty Truck Engine and Transmission Study is based on the responses of 1,725 primary maintainers of Class 8 heavy-duty trucks that are one model-year-old. The study was fielded between February and May 2012.

You May Also Like

NMRA/NMCA Announce Augustine Herrera as National Tech Director

ProMedia Events and Publishing, the parent company of the Holley NMRA Ford Nationals and NMCA Muscle Car Nationals, has announced Augustine Herrera as the new NMRA/NMCA National Tech Director. His duties include overseeing fair competition in both drag racing series and leading the on-site tech staff at all national events.  “Augustine joined our team in

ProMedia Events and Publishing, the parent company of the Holley NMRA Ford Nationals and NMCA Muscle Car Nationals, has announced Augustine Herrera as the new NMRA/NMCA National Tech Director. His duties include overseeing fair competition in both drag racing series and leading the on-site tech staff at all national events. 

Shop Solutions November 2021

Check out these Shop Solutions from builders across the country!

Cam Center
Holley Classic Truck Battery Tray and Hold Down

Holley Classic Trucks can battery trays for 1981-1987 C/K Series trucks and Blazer/Jimmy/Suburban manufactured to precisely mimic the factory look with all of the original holes and contours. Related Articles – Rocker Arm Tech – Part 1 – Automotive Specialty-Equipment Retail Sales Reach New High – Rebuilders Choice Made from heavy-gauge steel and EDP coated

Holley Battery Tray
Rocker Arm Tech – Part 1

In this episode of Steve Tech, Steve Morris breaks down the fundamentals of rocker arms, rocker arm stands and valvetrain rocker arm geometry. Class is in session! Related Articles – The SCAT Story – Numbers Don’t Tell The Whole Story – Performance Rocker Arms

Automotive Specialty-Equipment Retail Sales Reach New High

Despite what occurred throughout 2020, the specialty-equipment industry showed resilience with industry retail sales climbing from $46.2 billion to a new high of $47.89 billion in the U.S., according to the new 2021 SEMA Market Report. Related Articles – Future of Engine Building: Converting the Masses – Future of Engine Building: The Road Ahead for

Other Posts

COMP Performance Group Announces Plans for 2013 Power Tour

The Power Tour is considered one of the biggest and best road trips in the nation for performance enthusiasts. A variety of special events are scheduled throughout the week, including a highly anticipated cruise night in downtown Memphis (home of CPG) on the Tuesday, June 4. Related Articles – New AETC Website Debuts – PRW

New AETC Website Debuts

Each year AETCbrings together engine builders, racers, engineers and media members from around the world to exchange information on the day’s most popular engine-building topics. In an effort to make information about the conference even more accessible, AETChas recently launched an updated, easy-to-navigate website. Related Articles – Eaton Sponsors Western Michigan University Student Race Car

PRW Opens New Corporate Office and Warehouse Distribution Center

The PRW warehouse distribution center and corporate headquarters in now located in Perris, California. In addition to being designed to maximize storage and order shipping, the facility has an abundance of office space that houses the sales, management and support teams, an employee break room, conference rooms, and a larger engineering and product development department.

Melling, Dura-Bond Consolidate Sales and Marketing Efforts

Charles Barnett, vice president of sales and marketing at Dura-Bond Bearing Co., will be heading up the consoliated efforts between Dura-Bond and Melling. Barnett has been a long-term employee at the company as president prior to the Melling purchase several years ago. He also had a career with ACDelco/General Motors and previously served as general sales