AFIS Announces a New, High-Quality Range of Fast-Reaction Fuel Injectors - Engine Builder Magazine

AFIS Announces a New, High-Quality Range of Fast-Reaction Fuel Injectors

1dAFIS-FRT-Injectors-webEntering its fourth consecutive year as NHRA contingency sponsor, AFIS has announced a new, high quality range of fast-reaction fuel injectors. Named FRT, they suit high-performance street cars and racing cars as diverse as Pro Mod to Sport Compacts.

Significantly, the major advantage of FRT injectors is their reaction time due to a new electronic solenoid within the injector body that controls the pintel. The diminutive pintel receives its signal from the ECU and by opening and closing faster the FRT injector delivers a crisper, more precise and better atomized charge of fuel. Precise fuel discharge improves the engine’s throttle response and its economy, but above all, increases its power.

Available in either high or low impedance styles AFIS competition injectors operate with either aftermarket or OEM electronic control units. In addition, they are capable of operating at 12 or 16 volts, and all injectors rated at 48lbs and over are flow-matched. This ensures the racer is never “chasing a bad cylinder” caused by a deficient injector. AFIS avoids the implication of the rich or lean cylinder by rating all their injectors to plus-or-minus 1 percent accuracy.

Lastly, AFIS, which was founded by EFI mastermind John Meaney, industry specialist Tom Jenkins and Precision Turbo principal Harry Hruska, proudly proclaim that their new FRT injectors are U.S.-made and they maintain the largest selection of application-specific injectors in the industry.

You May Also Like

Check Out What’s New at Dura-Bond Bearing

New transmission bearings, cam bearings and valve seat options.

We caught up Dura-Bond Bearing's Bill Dolak at the 2023 PRI Show to get a run down of what we can expect from the bearing company in 2024. Dura-Bond has new transmission kits, new cam bearings for the LS3 and Ford Godzilla engines, and a new copper-infiltrated powder metal valve seat, among plenty more.

ARP Special Chaser Taps

ARP has expanded its tap offerings to include some 22 different sizes.

ARP chaser taps
Summit Racing Forged Pro Pistons

Made in the USA, Summit Racing Forged Pro Pistons are made using ultra-modern technology and materials so they’re stronger and lighter.

CP-Carrillo Pistons and Rods for VW/Audi

This piston and rod combination is designed as a perfect fit and meant to withstand large boost levels.

Eneos Racing Pro 10w-50 Oil

With Racing Pro 10w-50, a 50/50 ester mix provides exceptional wear protection, extra high horsepower, and further anti-oxidation stability.

Eneos 10w-50 motor oil

Other Posts

Fluidampr Performance Damper for Mazda Miata

Fluidampr performance dampers protect your engine from destructive crankshaft torsional vibration.

Fluidampr Mazda Miata damper
Mahle PowerPak Pistons for 6.0L and 6.4L Powerstroke Engines

All four sets offer incredible versatility, allowing a daily driver to become a weekend warrior for drag, dyno, or pulling competitions.

Point One Small Block Chevy Head Stud Kit

Point One’s E190 head studs boast an impressive 190,000 psi nominal tensile strength.

Cadillac Supercharged LS engine
Weinle Motorsports Sheet Metal Intakes

These custom aluminum sheet metal intakes are built to your specs.