Mike's Racing Heads Designs New Edelbrock 15-Degree SB Chevrolet - Engine Builder Magazine

Mike’s Racing Heads Designs New Edelbrock 15-Degree SB Chevrolet

1dMRH-Edelbrock15[1]Mike Androwick of Mike’s Racing Heads has been a cylinder head porter all his life. In NHRA Pro Stock he worked alongside Richard Maskin, Bob Glidden and Larry Morgan. In big-block Modified oval track racing series in the northeast, he provided 60 sets of racing heads, winning the 2013 championship with Brett Hearn. For 2014 drag racing he has prepared a new small-block innovation based on the Edelbrock 15-degree cylinder head.

Derived from the Edelbrock 15-degree Pro-Port head (p/n 77549), this head features 300cc intake volume runners and is developed for engine displacements of 400 to 434cu. in. Considering its inline-valve configuration, the peak flow numbers are impressive as the intake tracts generate 397cfm and exhausts 273cfm. Inlet and exhaust valve sizes are 2.180in. and 1.625in. respectively, which seat on a 50-degree angle.

These new head designs are developed to operate with Jesel shaft-mounted rockers (P/N KPS-10009).

You May Also Like

Summit Has RaceTec Pistons

With almost 1,300 configurations available, Summit Racing has the RaceTec Racing or AutoTec piston that fits your engine build.

With almost 1,300 configurations available, chances are good Summit Racing has the RaceTec Racing or AutoTec piston that fits your engine build. It’s like getting custom pistons right off the shelf.

AutoTec PistonsAutoTec Pistons are forged from low-expansion 4032 aluminum alloy to maintain tighter piston-to-wall clearances. That means better cylinder sealing, lower cylinder wear, and OEM noise levels, making them ideal for street and lightly boosted applications. Features include:• CNC-diamond turned skirts• CNC-machined ring grooves• Top ring land gas distribution grooves to enhance performance and improve ring seal • Broached double pin oilers• Wristpins, wire locks, and ring set included

Point One Small Block Chevy Head Studs

Point One’s E190 head studs boast an impressive 190,000psi nominal tensile strength and are made from grade 8740 steel sourced only from US mills.

LSX Oil Pump Mounting Brackets from Peterson Fluid Systems

Kits include all necessary hardware for mounting oil pumps to the engine block.

Hot Shot’s Secret Stiction Eliminator

Hot Shot’s Secret Stiction Eliminator is engineered to remove stiction, the sludge and varnish created from burnt oil, while also lubricating.

Howards Cams Track Smart Forged H-Beam Connecting Rods

Designed for serious street and sportsman race engines, these H-beam rods are forged and CNC-machined from certified 4340 high tensile steel.

Other Posts

Edelbrock Group Brands Now on MidwayPlus B2B Platform

The platform is convenient for checking prices, inventory, and freight costs before placing an order.

Supertech Sodium-Filled Valves

These Supertech valves offer a significant reduction in valve head temperatures for today’s turbo engines.

Dart Fully Counterweighted LS Crankshaft

These eight-counterweight cranks are precision CNC-machined from premium 4340 steel billet.

Cobb Tuning Subaru Stage 2 Power Package

Cobb OTS maps are aimed at reliably increasing power output with the use of Cobb Stage 2 Power Packages.