AFIS Introduces its New Range of High-Performance Ignition Wire Sets - Engine Builder Magazine

AFIS Introduces its New Range of High-Performance Ignition Wire Sets

AFIS ignition wires-webAFIS’s new high-performance ignition wire sets are strong, high-energy ignition wire sets with low resistance. Both fiber and spiral cores transmit current without interference and every wire set is checked for output and endurance.

Developed for high-performance street cars and racing cars, AFIS has introduced a comprehensive new range of spiral-core ignition wire sets that contribute very low resistance, 50 Ohms per foot. Their low resistance means that more electrical current is transmitted from the distributor or coil to fire the spark plugs while still maintaining RFI/EMI suppression: they inhibit electromagnetic interference. Electrical current is transmitted through the cable’s Aramid fiber and also its spiral core—its inductive wire windings.

At its center the strong, heat-resistant synthetic core fiber is impregnated with carbon. The spiral core, which is wound around the fiber, prevents the magnetic field, the electrical noise, from being transmitted to other electrical components. In addition, the wire sets feature a superior jacket that promises the best combination of low- and high-temperature performance. The jacket is also resistant to dielectric failure, proving to be particularly effective if put in contact with under-hood fluids—oil, brake or transmission fluids.

Between the jacket and the spiral core a robust, woven fiberglass braid and mesh tape is applied to improve terminal pull-off resistance. Often the major concern with plug wires is reflected in the extent of deterioration of their cores. Significantly, AFIS not only tests every ignition wire set but also engages in endurance testing to ensure peak performance is maintained over prolonged periods. Prices of AFIS ignition wire sets start at $49.95.

You May Also Like

Carrillo Forged Pistons and Connecting Rods for Ford 7.3L Godzilla

These pistons are forged from 2618T aluminum alloy and machined on dedicated CNC machine cells to tight tolerances. 2618 aluminum has a lower silicon content than other alloys. That makes the pistons stronger and more ductile—perfect for high-load, high-stress applications like superchargers, turbochargers, or nitrous oxide.  Other features include:• Rated to handle up to 1,500

These pistons are forged from 2618T aluminum alloy and machined on dedicated CNC machine cells to tight tolerances. 2618 aluminum has a lower silicon content than other alloys. That makes the pistons stronger and more ductile—perfect for high-load, high-stress applications like superchargers, turbochargers, or nitrous oxide. 

Other features include:• Rated to handle up to 1,500 horsepower• -21.1cc dish with two valve reliefs• Lateral gas-ported to maintain tighter piston-to-bore clearances for better sealing• 10.5:1 compression on E85 with 1.338-inch compression height• .990-inch chromoly wristpins for use with wire locks• Choice of 4.225- or 4.250-inch bore sizes

Fluidampr Harmonic Damper from Summit Racing Equipment

The factory harmonic damper on your modern GM, Ford, or Mopar V8 are ‘tuned’ to absorb what’s called torsional vibration in the engine’s normal operating RPM range. Performance modifications, particularly ones that increase torque, produce added vibration in an RPM range that the elastomer damper wasn’t designed to handle. That vibration will accelerate component wear,

Elgin OE Replacement MLS Head Gaskets for Ford 6.7L Diesel Engines

Elgin Industries has introduced original equipment replacement multi-layer-steel head gaskets for 2011-2020 Ford 6.7L diesel engines. Related Articles – Turbosmart TS-1 Externally Wastegated Turbocharger – FuelTech FT600 EFI System – Trick Flow Specialties DHC 200 Aluminum Cylinder Heads The new gaskets – EHG-26661 (left) and EHG-26662 (right) – match the design, fitment and quality of

Starrett Introduces Easy-to-Use Precision Wireless Electronic Depth Gages

The L.S. Starrett Company, a leading global manufacturer of precision measuring tools and gages, metrology systems and more, has introduced three Wireless Electronic Depth Gages including the W640JZ, W643JZ, and W644JZ which are made in the U.S.A., part of a line of over 40 new electronic precision gages that Starrett recently introduced to the market.

PBM Rotating Assemblies

PBM rotating assemblies have a proven reputation of quality, durability and performance.

Other Posts

CHE Precision LS Series Rocker Arms

CHE found ways to improve the factory production rocker arms reliability.

Graymills’ SuperSonic Liftkleen Parts Washer

Unlike standard spray cabinet washers, immersion cleaning exposes all surfaces of the part, including blind holes and small crevices, to the cleaning solution.

IRD Racing K4 Series Custom Carburetors

From Mega Trucks, Super Cat Class Poker Run boats, to all out drag racing, this carburetor can handle whatever is thrown at it.

Fluidampr for SRT 6.2L Hellcat Engine

Upgrading to a Fluidampr performance damper when engine mods are done further ensures long term durability and optimum power .