Edelbrock Dodge Ram E-Force Supercharger - Engine Builder Magazine

Edelbrock Dodge Ram E-Force Supercharger

Edelbrock E-Force SuperchargerEdelbrock has introduced its E-Force Supercharger system for 2009-12 Dodge Ram trucks with a 5.7L HEMI engine. This system increases the performance of the stock engine to 421 rear wheel horsepower and 441 ft-lbs. of torque, for an increase of 100 horsepower and 100 ft-lbs. of torque over stock for improved street and towing performance.

 

This system utilizes the same Eaton Gen VI 2300 Twin Vortices Series (TVS) rotors found in the highly successful HEMI passenger car E-Force Superchargers. The supercharger assembly is integrated into Edelbrock’s unique intake manifold for a truly seamless design with minimal components. The intake features 7″ long runners for maximum low-end torque and an integrated bypass valve that helps reduce parasitic loss under light throttle, which improves gas mileage potential.

Keeping the air cool is a dual, high capacity, air to water intercooler and a full face, low temp, heat exchanger. It has been designed to meet 50-State emissions (E.O. Number D-215-85) and will work with all OEM emissions equipment. The complete E-Force supercharger system (#1538) includes everything needed to bolt it on. It includes a supercharger/manifold assembly, air-to-water intercooler and a handheld programmer to properly tune the factory ECU for the added power. A system is also available without a tuner (#15380).

This system is ideal for users who already have a tuner or wish to tailor a custom tune. Edelbrock offers two levels of optional powertrain warranty terms – including 3-Year/36,000 mile and 5-year/100,000 mile, offering up to $19,000 of coverage. Application PART # 2009-12 Dodge Ram Trucks with 5.7L HEMI engine (with tuner) 1538 2009-12 Dodge Ram Trucks with 5.7L HEMI engine (without tuner) 15380.

For more information visit www.edelbrock.com.

You May Also Like

Summit Racing Camshaft Bearing Bore Alignment Tool

The Summit Racing Cam Bearing Alignment Tool fits Gen III and Gen IV LS engines.

cam bearing tool

When you’re installing new cam bearings in an LS engine block, the first four (from back to front of the engine) are usually no problem. That’s because the block helps keep the cam bearing installation tool centered in the bearing bores. But when it comes to the front cam bearing, there is nothing to keep the installation tool centered in the bore. That means the chances of that bearing going in cockeyed are pretty high.

Kaase Racing Engines’ P-51d Cylinder Heads

Kaase Racing Engines’ new P-51d cylinder head includes concepts developed from three years of revisions and testing.

Elgin Chrysler Hemi Engine Hydraulic Lifter/Guide Assemblies

Elgin Pro-Stock OE-quality hydraulic roller lifter/guide assemblies for 2004-newer Chrysler Hemi engines without MDS cylinder deactivation.

Isky Dual Valve Spring Set

These sets feature drop-in installation and are wound from chrome silicon wire.

Holley’s Sniper 2 EFI Platform Gains Bluetooth Capability

Tech advancement brings even greater affordability and ease of use to Holley’s popular Sniper 2 EFI ecosystem.

Other Posts

Klotz Announces 2024 Product Catalog

By the time Klotz products reach your engine, it’s spent countless hours on the dyno and proven on the racetrack.

Pakelo Racing Transmission DLS A Lubricant

This product is Pakelo’s baseline IndyCar gearbox lubricant. It provides outstanding performance and greatly reduces drivetrain loss.

Scribner Plastics’ Cylinder Head Containers

Scribner Plastics’ cylinder head storage/shipping container fits small block, big block and most Pro Stock cylinder heads.

Breather Valley Plates for LS Engines by LS Classic

Precision machined from aluminum, these plates replace the stock valley plates found on Gen III and Gen IV LS engines.