PlastiKote Engine Enamel Paint - Engine Builder Magazine

Main Navigation

Advertisement
Social Connect
Resources
Our Brand Family
Engine Builder Magazine Logo
Content for engine professionals and enthusiasts
Products

PlastiKote Engine Enamel Paint

Engine Builder
By Engine Builder
Published:

PlastikoteAutomotiveEngineEnamelsThe restorers’ choice for over 75 years, PlastiKote Engine Enamel is easy to use and dries to an extremely rugged, high heat-resistant finish, giving users the “The Perfect Finish” when painting engine parts.

Related Articles

“PlastiKote Engine Enamel is the only choice for engine restorations and similar applications where a tough, high-heat finish is required,” said Katie Whiting, product manager, aerosols for Valspar. “We have a wide array of color choices and our colors are exact matches to original engine manufacturer standards. Just ask an expert to see why he uses PlastiKote Engine Enamel.”

Fully resistant to oil and gasoline, PlastiKote Engine Enamel will not weaken, crack, lift or peel. Durable and long lasting, repeated exposure to engine heat up to 500 degrees Fahrenheit will fuse PlastiKote Engine Enamel to the surface, increasing bonding strength. PlastiKote Engine Enamel is available in 25 colors and offers strong protection from chemicals such as road salt and those from within the vehicle’s engine.

For more information on PlastiKote and its products, contact your PlastiKote sales representative, visit www.PlastiKote.com or call 866-222-8714.

You May Also Like

Products

Summit Has RaceTec Pistons

With almost 1,300 configurations available, Summit Racing has the RaceTec Racing or AutoTec piston that fits your engine build.

Greg Jones
By Greg Jones
Greg Jones is Content Director and Editor of Engine Builder Magazine.
Published:

With almost 1,300 configurations available, chances are good Summit Racing has the RaceTec Racing or AutoTec piston that fits your engine build. It’s like getting custom pistons right off the shelf.

AutoTec PistonsAutoTec Pistons are forged from low-expansion 4032 aluminum alloy to maintain tighter piston-to-wall clearances. That means better cylinder sealing, lower cylinder wear, and OEM noise levels, making them ideal for street and lightly boosted applications. Features include:• CNC-diamond turned skirts• CNC-machined ring grooves• Top ring land gas distribution grooves to enhance performance and improve ring seal • Broached double pin oilers• Wristpins, wire locks, and ring set included

Read Full Article

More Products Posts
Point One Small Block Chevy Head Studs

Point One’s E190 head studs boast an impressive 190,000psi nominal tensile strength and are made from grade 8740 steel sourced only from US mills.

By Greg Jones
LSX Oil Pump Mounting Brackets from Peterson Fluid Systems

Kits include all necessary hardware for mounting oil pumps to the engine block.

By Greg Jones
Hot Shot’s Secret Stiction Eliminator

Hot Shot’s Secret Stiction Eliminator is engineered to remove stiction, the sludge and varnish created from burnt oil, while also lubricating.

By Greg Jones
Howards Cams Track Smart Forged H-Beam Connecting Rods

Designed for serious street and sportsman race engines, these H-beam rods are forged and CNC-machined from certified 4340 high tensile steel.

By Greg Jones

Other Posts

Supertech Sodium-Filled Valves

These Supertech valves offer a significant reduction in valve head temperatures for today’s turbo engines.

By Greg Jones
Dart Fully Counterweighted LS Crankshaft

These eight-counterweight cranks are precision CNC-machined from premium 4340 steel billet.

By Greg Jones
Cobb Tuning Subaru Stage 2 Power Package

Cobb OTS maps are aimed at reliably increasing power output with the use of Cobb Stage 2 Power Packages.

By Greg Jones
Turbosmart’s New Fuel Pressure Regulator Lineup

Turbosmart regulators demonstrate leading fuel control and response via a true 1:1 ratio with superior flow and bypass capacity.

By Greg Jones