Fel-Pro Head Gasket Sets for Subaru Engines - Engine Builder Magazine

Fel-Pro Head Gasket Sets for Subaru Engines

Federal-Mogul Motorparts’ Fel-Pro Gaskets brand has introduced three first-to-market PermaTorque MLS multi-layer-steel head gasket sets for a variety of popular 2.5L engines used in late-model Subaru passenger vehicles.

Fel-Pro Subaru GasketsFederal-Mogul Motorparts’ Fel-Pro Gaskets brand has introduced three first-to-market PermaTorque MLS multi-layer-steel head gasket sets for a variety of popular 2.5L engines used in late-model Subaru passenger vehicles. The new sets are among 31 additional Fel-Pro part numbers introduced in the past year for more than 2.3 million Subaru vehicles.

Each new Fel-Pro head set features the brand’s premium, problem-solving PermaTorque MLS head gaskets, which provide the robust seal needed to contain peak combustion pressures and temperatures and withstand the significant casting motion encountered in many of today’s automotive engines. Each gasket features multiple layers of full-hard stainless steel, precisely engineered sealing beads and the brand’s proprietary blue aftermarket coating, which accommodates a wider range of surface finishes. Also featured in each head gasket is the brand’s exclusive LaserWeld stopper layer, which provides a precisely determined compression limit to help reduce head lift and bore distortion and prevent gasket damage while ensuring a superior combustion seal.

The following new PermaTorque MLS head sets are now available through Fel-Pro suppliers:

HS26531PT     2006-2007 Subaru H4 2.5L DOHC EJ255 (Forester, Impreza)

2007-2009 Subaru H4 2.5L DOHC EJ257 (Impreza)

2006 Saab H4 2.5L DOHC EJ255 (Aero)

HS26531PT1   2008-2012 Subaru H4 DOHC EJ255 (Forester, Impreza)

2007-2009 Subaru H4 DOHC EJ255 (Legacy, Outback)

HS26531PT2   2010-2012 Subaru H4 DOHC EJ255 (Legacy)

In addition to these new head gasket sets, Federal-Mogul Motorparts in the past year has introduced eight additional Fel-Pro head gaskets, six manifold sets, four valve cover sets, one oil pan set and 11 small-gasket sets for millions of 2.5L and 3.0L Subaru engines.

For more information visit www.felpro-only.com.

You May Also Like

Summit Racing Camshaft Bearing Bore Alignment Tool

The Summit Racing Cam Bearing Alignment Tool fits Gen III and Gen IV LS engines.

cam bearing tool

When you’re installing new cam bearings in an LS engine block, the first four (from back to front of the engine) are usually no problem. That’s because the block helps keep the cam bearing installation tool centered in the bearing bores. But when it comes to the front cam bearing, there is nothing to keep the installation tool centered in the bore. That means the chances of that bearing going in cockeyed are pretty high.

Kaase Racing Engines’ P-51d Cylinder Heads

Kaase Racing Engines’ new P-51d cylinder head includes concepts developed from three years of revisions and testing.

Elgin Chrysler Hemi Engine Hydraulic Lifter/Guide Assemblies

Elgin Pro-Stock OE-quality hydraulic roller lifter/guide assemblies for 2004-newer Chrysler Hemi engines without MDS cylinder deactivation.

Isky Dual Valve Spring Set

These sets feature drop-in installation and are wound from chrome silicon wire.

Holley’s Sniper 2 EFI Platform Gains Bluetooth Capability

Tech advancement brings even greater affordability and ease of use to Holley’s popular Sniper 2 EFI ecosystem.

Other Posts

Fire Rings for a Better Sealing Diesel Engine

As the typical diesel engine continues to see more performance, a simple job like fire ring installation can go a long way toward keeping your engine together and working properly.

fire ring block
Klotz Announces 2024 Product Catalog

By the time Klotz products reach your engine, it’s spent countless hours on the dyno and proven on the racetrack.

Pakelo Racing Transmission DLS A Lubricant

This product is Pakelo’s baseline IndyCar gearbox lubricant. It provides outstanding performance and greatly reduces drivetrain loss.

Scribner Plastics’ Cylinder Head Containers

Scribner Plastics’ cylinder head storage/shipping container fits small block, big block and most Pro Stock cylinder heads.