Hedman Stainless Steel Headers - Engine Builder Magazine

Main Navigation

Advertisement
Social Connect
Resources
Our Brand Family
EngineBuilder Logo - Babcox Media
Content for engine professionals and enthusiasts
Products

Hedman Stainless Steel Headers

Hedman’s newly designed shorty headers for the S197 5.0 Mustang are created with power and efficiency in mind, and are engineered to give your vehicle the maximum amount of breathing room without violating your state’s emissions laws.

Engine Builder
By Engine Builder

main-amageHedman’s newly designed shorty headers for the S197 5.0 Mustang are created with power and efficiency in mind, and are engineered to give your vehicle the maximum amount of breathing room without violating your state’s emissions laws. 50-state legal under C.A.R.B. E.O.# D-167-34 and classified as a direct replacement for the factory exhaust manifolds, these new headers are anything but stock. Not only do they help improve combustion efficiency, they look great too.

Related Articles

Manufactured out of 100% T-304 Stainless Steel, Hedman’s S197 headers feature sturdy 16-guage mandrel bent 1 3/4-inch primaries with bullet-proof 3/8-inch thick flanges that provide a solid connection to your Mustang’s engine block.

2011-’14 Mustang 5.0 headers (Part # 82726) are finished in Hedman’s HTC high-temperature silver ceramic coating for a long lasting bright finish that works to keep more heat in the header tubes for faster exhaust speeds and lower under hood temperatures. Also available in Hedman’s New BLACK MAXX Black Ceramic coating. Mounting hardware, instructions and the mandatory E.O sticker for your engine compartment are all included for an easy and LEGAL installation.

All Hedman Hedders are manufactured in the U.S.A., and are confidently backed by a Lifetime Warranty against manufacturing defects, and a five year warranty on the HTC-coating.

For more information, visit www.Hedman.com.

You May Also Like

Products

Carrillo Forged Pistons and Connecting Rods for Ford 7.3L Godzilla

These pistons are forged from 2618T aluminum alloy and machined on dedicated CNC machine cells to tight tolerances. 2618 aluminum has a lower silicon content than other alloys. That makes the pistons stronger and more ductile—perfect for high-load, high-stress applications like superchargers, turbochargers, or nitrous oxide.  Other features include:• Rated to handle up to 1,500

Engine Builder
By Engine Builder

These pistons are forged from 2618T aluminum alloy and machined on dedicated CNC machine cells to tight tolerances. 2618 aluminum has a lower silicon content than other alloys. That makes the pistons stronger and more ductile—perfect for high-load, high-stress applications like superchargers, turbochargers, or nitrous oxide. 

Other features include:• Rated to handle up to 1,500 horsepower• -21.1cc dish with two valve reliefs• Lateral gas-ported to maintain tighter piston-to-bore clearances for better sealing• 10.5:1 compression on E85 with 1.338-inch compression height• .990-inch chromoly wristpins for use with wire locks• Choice of 4.225- or 4.250-inch bore sizes

Read Full Article

More Products Posts
Fluidampr Harmonic Damper from Summit Racing Equipment

The factory harmonic damper on your modern GM, Ford, or Mopar V8 are ‘tuned’ to absorb what’s called torsional vibration in the engine’s normal operating RPM range. Performance modifications, particularly ones that increase torque, produce added vibration in an RPM range that the elastomer damper wasn’t designed to handle. That vibration will accelerate component wear,

By Engine Builder
Elgin OE Replacement MLS Head Gaskets for Ford 6.7L Diesel Engines

Elgin Industries has introduced original equipment replacement multi-layer-steel head gaskets for 2011-2020 Ford 6.7L diesel engines. Related Articles – Turbosmart TS-1 Externally Wastegated Turbocharger – FuelTech FT600 EFI System – Trick Flow Specialties DHC 200 Aluminum Cylinder Heads The new gaskets – EHG-26661 (left) and EHG-26662 (right) – match the design, fitment and quality of

By Engine Builder
Starrett Introduces Easy-to-Use Precision Wireless Electronic Depth Gages

The L.S. Starrett Company, a leading global manufacturer of precision measuring tools and gages, metrology systems and more, has introduced three Wireless Electronic Depth Gages including the W640JZ, W643JZ, and W644JZ which are made in the U.S.A., part of a line of over 40 new electronic precision gages that Starrett recently introduced to the market.

By Engine Builder
PBM Rotating Assemblies

PBM rotating assemblies have a proven reputation of quality, durability and performance.

By Engine Builder

Other Posts

CHE Precision LS Series Rocker Arms

CHE found ways to improve the factory production rocker arms reliability.

By Engine Builder
Graymills’ SuperSonic Liftkleen Parts Washer

Unlike standard spray cabinet washers, immersion cleaning exposes all surfaces of the part, including blind holes and small crevices, to the cleaning solution.

By Engine Builder
IRD Racing K4 Series Custom Carburetors

From Mega Trucks, Super Cat Class Poker Run boats, to all out drag racing, this carburetor can handle whatever is thrown at it.

By Engine Builder
Fluidampr for SRT 6.2L Hellcat Engine

Upgrading to a Fluidampr performance damper when engine mods are done further ensures long term durability and optimum power .

By Engine Builder