DeatschWerks Subaru Top Feed Upgrade and Top Feed Conversion Fuel Rail Kits with Injectors - Engine Builder Magazine

DeatschWerks Subaru Top Feed Upgrade and Top Feed Conversion Fuel Rail Kits with Injectors

This kit eliminates the poorly designed OE rails that allow cylinder-to-cylinder pressure variances.

DeatschWerks announces the expansion of their diverse fuel delivery products to include 2 innovative rail-injector kits for Subaru WRX, STi, and other EJ20 and EJ25 Subaru engines.  The new kits come in 2 styles: Upgrade Kit and Conversion Kit.

Top Feed Upgrade 2The Upgrade Kit is for applications that already utilize top feed injectors.  This kit eliminates the poorly designed OE rails that allow cylinder-to-cylinder pressure variances.

The DeatschWerks kit includes injectors and rails that are engineered to work together and provide consistent fuel supply over a wide range of flow rates and pressures.

The Conversion Kit is for applications that utilize side feed injectors.  This kit, in addition to supplying a consistent fuel supply, allows the customer to run top feed injectors that are less expensive, tune better, and are available in many more flow rate options.

Both the Upgrade Kit and the Conversion Kit include Bosch EV14 injectors ranging from 750cc to 1200cc and are engineered as a system where the injectors, rails, and mounting hardware all work together to integrate flawlessly into the existing OE manifold and mounting points.   In addition, both systems are fully anodized for e85 compatibility; feature large bore -6AN fittings; and include everything needed for a drop-in fitment.

All DeatschWerks products come with a 3-year comprehensive warranty. More information about the Subaru Top Feed Rails visit: www.deatschwerks.com.

You May Also Like

Perfecting Ring Seal Soup

Using modern honing machines, surface finishes, crosshatch angles, ring materials, and coatings all combine to create a more efficient engine.

A Combination of Oil, Surface Finish & Crosshatch

If you’ve been following along in the pages of Engine Builder lately, or have spoken to anyone at Total Seal or Rottler in the last couple years, you already know the mantra of “oil is the gasket.” Microscopic surface roughness and waviness create leak paths, especially under high cylinder pressures. These peaks and valleys exist, not just on the block and head surface, but on the cylinder walls, piston rings and piston ring grooves. That’s where motor oil acts like a gasket to seal those components together. 

Get’M Performance All-In-One Blower Adapter

Features include built-in blower strap mounts, throttle linkage bracket, injector bung compatible and reduced overall height and weight.

Plazmaman LS7 Billet Intake Manifold

Racing design and feedback has been combined, along with Solid Works Computational Fluid Dynamics Software to produce this intake from Plazmaman.

Dayco Adds New Products to its Portfolio

Dayco is adding coverage to three of its product lines – serpentine belt kits, belts and hoses.

Reid 426 Intake Roller Rocker Arms

Reid’s 426 intake roller rocker arm is for “high” ratio stand set ups.

rocker arms

Other Posts

Connecting Rod Stress

Connecting rods are subject to constant stress through extreme tensile and compressive loads, each one tied to a different aspect of operation.

Balancing, A State of Equilibrium

The balance of a rotating assembly is critical in every aspect and for every engine.

Factors of Crankshaft Selection

From the high-performance powerplants propelling Top Fuel dragsters to the subdued engines found in family sedans and grocery getters, each crank must be tailored to, and appropriate for, its specific application.

Shop Solutions March 2024

I always keep a pair of needle nose pliers and a small, straight screwdriver in my blast cabinet to hold small parts when blasting.