Design Engineering Ultra Sheath MA - Engine Builder Magazine

Design Engineering Ultra Sheath MA

Design Engineering’s new lightweight Ultra Sheath MA reflects direct and radiant heat that can cause damage to under-hood components, burn ignition wires and wiring, or damage brake and fuel lines. Designed as an upgrade to aluminum or foil sleeving, Ultra Sheath MA is constructed from a process that impregnates molten aluminum to the core fabric.

Ultra Sheath comboDesign Engineering’s new lightweight Ultra Sheath MA reflects direct and radiant heat that can cause damage to under-hood components, burn ignition wires and wiring, or damage brake and fuel lines. Designed as an upgrade to aluminum or foil sleeving, Ultra Sheath MA is constructed from a process that impregnates molten aluminum to the core fabric giving it higher heat reflective properties. This process provides a higher sustained heat capability; up to 1100°F for direct heat.

More flexible and 40% lighter than standard foil or bonded aluminum products, Ultra Sheath MA trims to desired lengths for quick and easy installation; even in hard to reach locations. Ultra Sheath MA is available in multiple ID sizes and lengths, including bulk: ½” ID x 3’ (#010230), ½” ID x 15’ (#010231), ¾” ID x 3’ (#010232), and 1-¼” x 3’ (#010233).

For more information: www.designengineering.com or 800-264-9472

You May Also Like

Summit Racing Camshaft Bearing Bore Alignment Tool

The Summit Racing Cam Bearing Alignment Tool fits Gen III and Gen IV LS engines.

cam bearing tool

When you’re installing new cam bearings in an LS engine block, the first four (from back to front of the engine) are usually no problem. That’s because the block helps keep the cam bearing installation tool centered in the bearing bores. But when it comes to the front cam bearing, there is nothing to keep the installation tool centered in the bore. That means the chances of that bearing going in cockeyed are pretty high.

Kaase Racing Engines’ P-51d Cylinder Heads

Kaase Racing Engines’ new P-51d cylinder head includes concepts developed from three years of revisions and testing.

Elgin Chrysler Hemi Engine Hydraulic Lifter/Guide Assemblies

Elgin Pro-Stock OE-quality hydraulic roller lifter/guide assemblies for 2004-newer Chrysler Hemi engines without MDS cylinder deactivation.

Isky Dual Valve Spring Set

These sets feature drop-in installation and are wound from chrome silicon wire.

Holley’s Sniper 2 EFI Platform Gains Bluetooth Capability

Tech advancement brings even greater affordability and ease of use to Holley’s popular Sniper 2 EFI ecosystem.

Other Posts

Klotz Announces 2024 Product Catalog

By the time Klotz products reach your engine, it’s spent countless hours on the dyno and proven on the racetrack.

Pakelo Racing Transmission DLS A Lubricant

This product is Pakelo’s baseline IndyCar gearbox lubricant. It provides outstanding performance and greatly reduces drivetrain loss.

Scribner Plastics’ Cylinder Head Containers

Scribner Plastics’ cylinder head storage/shipping container fits small block, big block and most Pro Stock cylinder heads.

Breather Valley Plates for LS Engines by LS Classic

Precision machined from aluminum, these plates replace the stock valley plates found on Gen III and Gen IV LS engines.