Mr. Gasket MLS Head Gaskets - Engine Builder Magazine

Main Navigation

Advertisement
Social Connect
Resources
Our Brand Family
EngineBuilder Logo - Babcox Media
Content for engine professionals and enthusiasts
Products

Mr. Gasket MLS Head Gaskets

Performance automotive manufacturing company, Mr. Gasket, has announced its complete line of high quality Multi-Layered Steel (MLS) Head Gaskets for a wide range of domestic engines. These gaskets provide improved protection for high-compression, turbo and supercharged applications.

Engine Builder
By Engine Builder

Mr. Gasket MLS Head Gasket #3250GPerformance automotive manufacturing company, Mr. Gasket, has announced its complete line of high quality Multi-Layered Steel (MLS) Head Gaskets for a wide range of domestic engines. These gaskets provide improved protection for high-compression, turbo and supercharged applications and deliver a tight, leak-proof seal under the most extreme conditions.

Related Articles

The gasket layers are individually cut using a state-of-the-art laser cutting process for precision tolerance. During the assembly process the gasket is soft radius embossed to provide additional protection in critical areas. This technique provides uniform clamp load distribution across the engine block deck and reduces stress points.

All Mr. Gasket MLS Head Gaskets go through a unique process after forming to reduce forming-induced stress points. The stress reduction process reduces brittleness in the materials increasing flexibility and deformation retention. A proprietary polymer is then applied to complete the gasket and ensure uniform coverage of the outer layers. A typical MLS gasket requires a smoother surface finish (30 Ra), but the coating on Mr. Gasket’s MLS Gaskets will seal a surface twice as rough (60 Ra). Each head gasket comes with an industry-leading lifetime warranty.

Mr. Gasket MLS Head Gaskets are available from $99.95 at retailers nationwide and online.

For more information: www.Mr-Gasket.com.

Part # Application Description Price
3128G CHEVROLET 283-350 4.035”/.040” $99.95
3129G CHEVROLET 283-350 4.100”/.040” $99.95
3146G GM LS1/LS6 5.7L 3.945”/.051” $99.95
3147G GM LS2/3 6.0L/6.2L 4.100”/.051” $99.95
3148G GM LS1/LS6 5.7L 3.945”/.040” $99.95
3149G GM LS2/3 6.0L/6.2L 4.100”/.040” $99.95
3240G AMC 390-401 4.250”/.040” $113.95
3241G AMC 390-401 4.380”/.040” $113.95
3243G BUICK 400-430 4.250”/.040” $113.95
3244G BUICK 455 4.385”/.040” $113.95
3246G OLDSMOBILE 330-400 4.100”/.040” $113.95
3247G OLDSMOBILE 403 4.410”/.040” $113.95
3248G OLDSMOBILE 455 4.270”/.040” $113.95
3250G PONTIAC 326-455 4.200”/.040” $113.95
3251G PONTIAC 326-455 4.270”/.040” $113.95
3254G FORD FE 390-428 4.165”/.040” $106.61
3255G FORD FE 390-428 4.325”/.040” $113.95
3256G FORD FE 390-428 4.400”/.040” $113.95
3259G FORD 429/460 4.400”/.040” $113.95
3260G FORD 429/460 4.500”/.040” $113.95
3263G FORD 4.6/5.4-L (2V) 3.630”/.040” $132.95
3264G FORD 4.6/5.4-R (2V) 3.630”/.040” $132.95
3265G FORD 4.6/5.4-L (3V) 3.630”/.040” $132.95
3266G FORD 4.6/5.4-R (3V) 3.630”/.040” $132.95
3269G FORD 5.0 COYOTE – R 3.755”/.040” $132.95
3270G FORD 5.0 COYOTE – L 3.755”/.040” $132.95
3275G CHRYSLER HEMI 5.7L – L 4.050”/.040” $113.95
3276G CHRYSLER HEMI 5.7L – R 4.050”/.040” $113.95
3277G CHRYSLER HEMI 6.1L 4.100”/.040” $113.95
3278G CHRYSLER HEMI 6.1L 4.185”/.040” $113.95
3283G GM LSX 376 – L 4.125”/.051” $99.95
3284G GM LSX 376 – R 4.125”/.051” $99.95
3285G GM LSX 454 – L 4.200”/.051” $99.95
3286G GM LSX 454 – R 4.200”/.051” $99.95

 

 

You May Also Like

Products

Carrillo Forged Pistons and Connecting Rods for Ford 7.3L Godzilla

These pistons are forged from 2618T aluminum alloy and machined on dedicated CNC machine cells to tight tolerances. 2618 aluminum has a lower silicon content than other alloys. That makes the pistons stronger and more ductile—perfect for high-load, high-stress applications like superchargers, turbochargers, or nitrous oxide.  Other features include:• Rated to handle up to 1,500

Engine Builder
By Engine Builder

These pistons are forged from 2618T aluminum alloy and machined on dedicated CNC machine cells to tight tolerances. 2618 aluminum has a lower silicon content than other alloys. That makes the pistons stronger and more ductile—perfect for high-load, high-stress applications like superchargers, turbochargers, or nitrous oxide. 

Other features include:• Rated to handle up to 1,500 horsepower• -21.1cc dish with two valve reliefs• Lateral gas-ported to maintain tighter piston-to-bore clearances for better sealing• 10.5:1 compression on E85 with 1.338-inch compression height• .990-inch chromoly wristpins for use with wire locks• Choice of 4.225- or 4.250-inch bore sizes

Read Full Article

More Products Posts
Fluidampr Harmonic Damper from Summit Racing Equipment

The factory harmonic damper on your modern GM, Ford, or Mopar V8 are ‘tuned’ to absorb what’s called torsional vibration in the engine’s normal operating RPM range. Performance modifications, particularly ones that increase torque, produce added vibration in an RPM range that the elastomer damper wasn’t designed to handle. That vibration will accelerate component wear,

By Engine Builder
Elgin OE Replacement MLS Head Gaskets for Ford 6.7L Diesel Engines

Elgin Industries has introduced original equipment replacement multi-layer-steel head gaskets for 2011-2020 Ford 6.7L diesel engines. Related Articles – Turbosmart TS-1 Externally Wastegated Turbocharger – FuelTech FT600 EFI System – Trick Flow Specialties DHC 200 Aluminum Cylinder Heads The new gaskets – EHG-26661 (left) and EHG-26662 (right) – match the design, fitment and quality of

By Engine Builder
Starrett Introduces Easy-to-Use Precision Wireless Electronic Depth Gages

The L.S. Starrett Company, a leading global manufacturer of precision measuring tools and gages, metrology systems and more, has introduced three Wireless Electronic Depth Gages including the W640JZ, W643JZ, and W644JZ which are made in the U.S.A., part of a line of over 40 new electronic precision gages that Starrett recently introduced to the market.

By Engine Builder
PBM Rotating Assemblies

PBM rotating assemblies have a proven reputation of quality, durability and performance.

By Engine Builder

Other Posts

CHE Precision LS Series Rocker Arms

CHE found ways to improve the factory production rocker arms reliability.

By Engine Builder
Graymills’ SuperSonic Liftkleen Parts Washer

Unlike standard spray cabinet washers, immersion cleaning exposes all surfaces of the part, including blind holes and small crevices, to the cleaning solution.

By Engine Builder
IRD Racing K4 Series Custom Carburetors

From Mega Trucks, Super Cat Class Poker Run boats, to all out drag racing, this carburetor can handle whatever is thrown at it.

By Engine Builder
Fluidampr for SRT 6.2L Hellcat Engine

Upgrading to a Fluidampr performance damper when engine mods are done further ensures long term durability and optimum power .

By Engine Builder