American Green Ventures SpillFix Industrial Organic Absorbent - Engine Builder Magazine

American Green Ventures SpillFix Industrial Organic Absorbent

American Green Ventures, Inc. has announced the availability of the SpillFix Industrial Organic Absorbent in the United States and Canada. Made of 100 percent renewable organic material, SpillFix instantly absorbs hazardous liquid spills on contact including oils, fuels, solvents, paints and chemicals.

American Green Ventures, Inc. has announced the availability of the SpillFix Industrial Organic Absorbent in the United States and Canada. Made of 100 percent renewable organic material, SpillFix instantly absorbs hazardous liquid spills on contact including oils, fuels, solvents, paints and chemicals, enabling faster, cleaner, safer and more effective clean up with minimal downtime.

SpillFix is made from a bi-product of the coconut (coir), which is an organic, renewable resource that is non-carcinogenic, contains no chemicals and is silica free. When compared to clay-based absorbents, SpillFix clients need 80 percent less product to clean up spills in less than half the time. SpillFix is dust- free, non-abrasive and there is no after residue often left with heavy sticky clay or absorbent pads. SpillFix can be reused to clean up more than one spill due to its superior absorbency, further adding to its cost savings. SpillFix is also landfill safe, providing lower disposal cost than other absorbent products with no environmental impact.

SpillFix was developed in Australia by the founder and executive chairman of Galuku Group Limited, Joe Davids. Galuku Group has granted American Green Ventures, Inc. the exclusive marketing and distribution rights for the North American market.

SpillFix is biologically stable and free of harmful silica dust. SpillFix absorbs hydrocarbon spills by encapsulating the liquid and trapping it inside its hollow channel structure. Used SpillFix that has absorbed hydrocarbons can be used as a fuel source in energy producing incinerators. SpillFix has also been tested to U.S. Environmental Protection Agency Leachate standards for safe landfill disposal (always confer with local authorities) with no environmental impact.

For more information: www.spillfix.com.

You May Also Like

Summit Racing Camshaft Bearing Bore Alignment Tool

The Summit Racing Cam Bearing Alignment Tool fits Gen III and Gen IV LS engines.

cam bearing tool

When you’re installing new cam bearings in an LS engine block, the first four (from back to front of the engine) are usually no problem. That’s because the block helps keep the cam bearing installation tool centered in the bearing bores. But when it comes to the front cam bearing, there is nothing to keep the installation tool centered in the bore. That means the chances of that bearing going in cockeyed are pretty high.

Kaase Racing Engines’ P-51d Cylinder Heads

Kaase Racing Engines’ new P-51d cylinder head includes concepts developed from three years of revisions and testing.

Elgin Chrysler Hemi Engine Hydraulic Lifter/Guide Assemblies

Elgin Pro-Stock OE-quality hydraulic roller lifter/guide assemblies for 2004-newer Chrysler Hemi engines without MDS cylinder deactivation.

Isky Dual Valve Spring Set

These sets feature drop-in installation and are wound from chrome silicon wire.

Holley’s Sniper 2 EFI Platform Gains Bluetooth Capability

Tech advancement brings even greater affordability and ease of use to Holley’s popular Sniper 2 EFI ecosystem.

Other Posts

Klotz Announces 2024 Product Catalog

By the time Klotz products reach your engine, it’s spent countless hours on the dyno and proven on the racetrack.

Pakelo Racing Transmission DLS A Lubricant

This product is Pakelo’s baseline IndyCar gearbox lubricant. It provides outstanding performance and greatly reduces drivetrain loss.

Scribner Plastics’ Cylinder Head Containers

Scribner Plastics’ cylinder head storage/shipping container fits small block, big block and most Pro Stock cylinder heads.

Breather Valley Plates for LS Engines by LS Classic

Precision machined from aluminum, these plates replace the stock valley plates found on Gen III and Gen IV LS engines.