Holley HydraMat Fuel Reservoir Systems - Engine Builder Magazine

Holley HydraMat Fuel Reservoir Systems

Holley's HydraMat is a patent-pending fuel reservoir system designed to reduce fuel starvation issues present in hard cornering, acceleration, stopping, inclines, and low fuel conditions.

013f8078-6a9d-4ae4-bd6c-e46ca026112fHolley’s HydraMat is a patent-pending fuel reservoir system designed to reduce fuel starvation issues present in hard cornering, acceleration, stopping, inclines, and low fuel conditions. It is in these situations that traditional fuel pickups can be starved of fuel, which then introduces air into the fuel system resulting in poor engine performance and even engine stalling.

Surface tension and fluid wicking are the secrets of the HydraMat’s amazing ability to draw fuel from nearly any area that has contact with fuel and store in its internal reservoir. As an area of the HydraMat is uncovered, the tiny pores of the media seal off through surface tension, forcing fuel to be contained in the internal reservoir and drawn from other areas of the mat where fuel continues to be available. The sheer size and coverage area of the HydraMat allows it to pull fuel from virtually any area in the tank or cell eliminating the need for specialty reservoirs and pick up pumps saving cost and greatly reducing complexity.

5691cc7e-9a5a-4a1d-9df2-15c1a32e4db9The HydraMat is available in various sizes and shapes to fit a variety of stock fuel tanks and/or race fuel cells. The HydraMat was proven after undergoing rigorous testing in the ARCA stock car racing series, and has become a spec part for fuel injected cars in the series. Square, rectangular, and “X” shaped mats are available to provide easy installation through various sending unit access holes or fuel cell cover plates. Retrofit devices will be available for stock tank vehicles to ease installation of aftermarket EFI retrofit kits like the Holley Terminator EFI System.

972b36a6-947f-4c11-bdc5-cb8c830e73c3

You May Also Like

Stef’s Performance Products’ 3-Gallon Truck Pull Dry Sump Tank

Stef’s Performance Products’ 3-gallon truck pull aluminum dry sump tank features a 9″ diameter, 19″ overall height, a two-piece design.

dry sump tank

Stef’s Performance Products' 3-gallon truck pull aluminum dry sump tank features a 9" diameter, 19" overall height, a two-piece design for easy cleaning, and the lower fitting is clockable in 45-degree increments. Part #4120 T also comes with a -16an inlet, -12an or -16an supply, 4" billet filler cap, and o-ringed sealed filler neck.

AMSOIL 5W-40 Synthetic Metric Motorcycle Oil

AMSOIL 5W-40 synthetic metric motorcycle oil is designed to excel in all areas unique to metric motorcycles, including high engine rpm, wet-clutch lubrication and extreme-pressure regions of gears.

AMSOIL motorcycle oil
Jomar 3-Piece Adjustable Pushrod Guide Plate Kits

Jomar’s kits are available for 5/16” or 3/8” pushrods, and for small block Ford and Chevrolet.

Jomar
JMS Daytona CD-1 Full Race Ignition System

This system optimizes the potential of distributor and crank trigger-based ignition systems on all 4, 6 and 8-cylinder engines.

Ignition
Fluidampr Toyota 2JZ Damper

Upgrading to a Fluidampr performance damper when engine mods are done further ensures long-term durability and optimum power.

Fluidampr Toyota 2JZ damper

Other Posts

AMSOIL Marine Engine Oil Now in Gallons

This new package size offers added convenience for owners of boats with larger sumps.

AMSOIL marine oil
Holley Terminator X Max EFI Kit for Godzilla Engines

This Terminator X Max EFI kit for Godzilla engines is latest in Holley’s growing portfolio of engine swap solutions.

Holley Terminator EFI
Cometic Duramax Top End Gasket Kit

Cometic’s Duramax gasket kit includes: 4.130″ bore, .047″ MLX cylinder head gaskets.

Cometic Duramax gaskets
ACL Oil Pump Catalog

ACL RACE Series oil pumps are designed with high output and high volume capabilities.