Sprintex USA Supercharger for Dodge Challenger V6 - Engine Builder Magazine

Sprintex USA Supercharger for Dodge Challenger V6

Sprintex USA is adding new charge to the late model Dodge Challenger equipped with a 3.6L V6 Pentastar engine by introducing a fully integrated supercharger system for 2012 to current models. The Sprintex supercharger, featuring a patented twin screw design, provides 54% more horsepower and 47% more ft. lbs. of torque over a stock V6 Challenger.

challenger_montage

Sprintex USA is adding new charge to the late model Dodge Challenger equipped with a 3.6L V6 Pentastar engine by introducing a fully integrated supercharger system for 2012 to current models. The Sprintex supercharger, featuring a patented twin screw design, provides 54% more horsepower and 47% more ft. lbs. of torque over a stock V6 Challenger. While performance varies based on overall condition of the vehicle, it is proven on a chassis dyno to easily add over 100 HP and 100 ft. lbs. of torque with more to spare.

Designed to take a Challenger from zero to 60 in less than five seconds, it generates an additional 50 ft. lbs. of torque by 1,000 RPM. “This kit delivers better performance than the 5.7 Hemi at a fraction of the cost, with substantially better fuel economy,” says Jeff Tromans, Sprintex USA National Sales Director.

The Sprintex Challenger supercharger generates efficient power across the full RPM spectrum with minimal internal leakage. The twin screw rotary compressor forms helical “packet’ volumes that deliver better efficiency and ultimately more power, particularly at lower RPMs with a no lag response time. As the supercharger rotates, it compresses the air inside the unit before releasing it to the intake manifold. This internal pressure ratio can be changed to suit each application, making the twin screw design very efficient for its intended application. It also makes the Sprintex compressor capable of very high boost pressures if needed.

Every Sprintex supercharger is designed, engineered and tested to OE specifications and features high quality materials and finishes. Built to ISO quality standards and test benched according to SAE J1723, the Sprintex supercharger is designed to last and look good under the hood. As a fully integrated and reversible system, all components are supplied pre-assembled. Self-contained oiling means there is no need for external oil lines or additional upgrades. Installation is estimated to be between six to eight hours. Some hood modification is required.

For more information: call 855.591.2778, or visit Sprintex USA.

You May Also Like

UEM Icon 5.3L EcoTec3 L83 Gen V GDI Pistons

The piston line features forged 4032 alloy for NA and 2618 alloy for boosted applications.

UEM Icon pistons

UEM Pistons’ Icon GM Gen V GM truck 5.3L EcoTec3 L83 GDI offerings are specifically engineered for heavy towing and boost applications. The piston line features forged 4032 alloy for NA and 2618 alloy for boosted applications.

Additionally, these pistons fit stock 6.098" rods and aftermarket 6.125" rod combinations, offer dual forced-pin oiling, a type 3 hard anodized crown and top ring groove for increased service life, UEM’s UltraWear M42 skirt coating, and a complete ring kit featuring a steel gas-nitrided top ring. 

CHE Ford Godzilla Trunnion Kit

The kit includes 16 heat-treated steel trunnions, 32 bronze bushings, and 33 retainer clips.

CHE trunnion kit
Rislone DEF Crystal Clean

First-of-its-kind product removes damaging crystals from SCR systems, clears P20EE codes.

Rislone DEF Crystal Clean
Pistal High Compression 100mm Drop-in Piston Kit

Made from forged aluminum, these Pistal pistons are both light and have high resistance.

Pistal pistons
B&B Performance Adjustable Billet Timing Pointers

Available for SBC, BBC and SBF, pointers come with stainless steel pointer, fasteners and a black anodized finish.

timing pointers

Other Posts

The Winners of 25th Annual TX2K

After a week of racing, the 25th TX2K is in the books, and champions have been crowned in the 13 drag racing classes, as well as four roll racing classes. The event, which started in 2000, has become an annual proving ground to see where the mark stands in a multitude of classes, as well

Holley Sniper 2 EFI

Holley’s Sniper 2 EFI ushers in a wide range of new technologies and features.

Holley Sniper 2 EFI
Arrow Pit Carts

Arrow has standard configurations available as well as options that can be fine-tuned to suit your needs.

Logan Yelton’s Turbocharged 5.9L 12-Valve Cummins Engine

During last year’s Ultimate Callout Challenge, Logan Yelton’s ’93 Dodge truck stood out as we walked through the pit area. We got a chance to speak with Logan about his company Loganbuilt and the 5.9L 12-valve Cummins engine under the hood of his vintage Dodge truck. See what went into the build in this Diesel