FUELAB Prodigy In-Tank Power Modules - Engine Builder Magazine

FUELAB Prodigy In-Tank Power Modules

FUELAB Prodigy In-Tank Power Modules bring the company's external fuel pump technology inside the fuel tank. Developed for racing and capable of street use, these fuel systems can provide fuel for up to 1800HP.

41ce94fe-7290-46be-85e2-494e793c79c3FUELAB Prodigy In-Tank Power Modules bring the company’s external fuel pump technology inside the fuel tank. Developed for racing and capable of street use, these fuel systems can provide fuel for up to 1800HP. Power Modules, like all Prodigy Fuel Pumps, are compatible with Gasoline, E85, Methanol or Diesel Fuels. Power Modules can be coupled with FUELAB’s Electronic Fuel pressure Regulator, bringing high flow capacity with automatic demand speed control (no programming, calibration or additional control boxes required).
Power Modules work with available installation kits including a Fabricator’s Kit, which allows installation of the Power Module into steel or aluminum tanks and fuel cells, using a unique sealed flange system. This system enables a quicker installation, with quick and easy service access, and includes an adjustable pick-up with integrated fuel strainer. Kit configurations for factory stock fuel tanks are available as well.
Self-contained and compact Power Modules eliminate the need to strap multiple fuel pumps onto a hanger, and require no splicing of tee fittings, hoses and wires inside the fuel tank. This avoids the risk of multiple pump failure and potential engine damage. Each Power Module includes auxiliary outlets for optional use of jet pumps. Jet pumps allow transfer of fuel within the fuel tank, for tough situations such as saddle tanks or internal sumps / baffles.
The Power Module system provides a clean installation by hiding the straining filter and pump. Installation time is quicker, with less fuel system components that require mounting. Previously considered problematic vehicles that are hard to sump, have saddle tanks or otherwise do not have enough room or a good location available for an external pump, now have a viable, simple and reliable solution.

You May Also Like

Summit Racing Camshaft Bearing Bore Alignment Tool

The Summit Racing Cam Bearing Alignment Tool fits Gen III and Gen IV LS engines.

cam bearing tool

When you’re installing new cam bearings in an LS engine block, the first four (from back to front of the engine) are usually no problem. That’s because the block helps keep the cam bearing installation tool centered in the bearing bores. But when it comes to the front cam bearing, there is nothing to keep the installation tool centered in the bore. That means the chances of that bearing going in cockeyed are pretty high.

Kaase Racing Engines’ P-51d Cylinder Heads

Kaase Racing Engines’ new P-51d cylinder head includes concepts developed from three years of revisions and testing.

Elgin Chrysler Hemi Engine Hydraulic Lifter/Guide Assemblies

Elgin Pro-Stock OE-quality hydraulic roller lifter/guide assemblies for 2004-newer Chrysler Hemi engines without MDS cylinder deactivation.

Isky Dual Valve Spring Set

These sets feature drop-in installation and are wound from chrome silicon wire.

Holley’s Sniper 2 EFI Platform Gains Bluetooth Capability

Tech advancement brings even greater affordability and ease of use to Holley’s popular Sniper 2 EFI ecosystem.

Other Posts

Klotz Announces 2024 Product Catalog

By the time Klotz products reach your engine, it’s spent countless hours on the dyno and proven on the racetrack.

Pakelo Racing Transmission DLS A Lubricant

This product is Pakelo’s baseline IndyCar gearbox lubricant. It provides outstanding performance and greatly reduces drivetrain loss.

Scribner Plastics’ Cylinder Head Containers

Scribner Plastics’ cylinder head storage/shipping container fits small block, big block and most Pro Stock cylinder heads.

Breather Valley Plates for LS Engines by LS Classic

Precision machined from aluminum, these plates replace the stock valley plates found on Gen III and Gen IV LS engines.