TI Automotive 39/50 Dual Channel Single Stage Pumps - Engine Builder Magazine

TI Automotive 39/50 Dual Channel Single Stage Pumps

TI Automotive has announced the release of a higher pressure version of its 39/50 Dual Channel Single Stage (DCSS) pumps. It is designed for engines with more than 500 HP and features a flow rate of 400lph at 40psi.

TIAuto3950PumpsCMYKTI Automotive has announced the release of a higher pressure version of its 39/50 Dual Channel Single Stage (DCSS) pumps. The DCSS 39/50 has been designed around the proven 39mm armature (motor) that has been used for many years, and features a single impeller with two parallel rows of turbine blades. It is designed for engines with more than 500 HP and features a flow rate of 400lph at 40psi.

“The turbine blades feed two high-pressure pumping channels, as opposed to a conventional single-stage pump that uses an impeller with a single row of blades at its outer edge,” explained Carl Hockman, product manager, TI Automotive. “This innovative design results in improved hot fuel flow, as well as minimal noise and current use, resulting in efficiency that’s 20 percent higher than conventional pumps.”

The TI Automotive F90000273 provides higher pressure relief when compared to the typical F90000262 pump. It is for gasoline engines only and will support 500 plus horsepower. The TI Automotive F90000274 delivers higher pressure relief than the typical F90000267 pump and is E85 compatible to support 750 plus horsepower engines.

For more information: www.tiautomotive.com/aftermarket.

You May Also Like

Tomei Forged Piston Kit for Nissan VR38DETT Engines

Tomei has announced a new piston kit for the Nissan VR38 engine made from A2618 aluminum alloy.

Tomei piston kit

Tomei’s Forged Piston Kit VR38DETT 95.50mm CH31.20 (4.1) CP features a 95.50mm bore, a 23.0mm pin diameter, with a pin length of 64mm. Additionally, the kit has a valve recess with the comp height of 31.20mm (OEM -3.1) and it has a piston weight of 392.5g, with a pin weight of 137.5g for a total weight of 530g. The clip inner diameter is 23mm.

PBM Rotating Assemblies

With PBM’s rotating assemblies, hundreds of stroke and bore combinations are available.

Rislone Diesel DEF Treatment

This unique formula protects SCR and DEF systems against harmful deposits that can otherwise build up and reduce engine performance.

Silver Seal LS Engine Parts Catalog

See Silver Seal’s Chevy/GM LS7 Delphi Lifters 25341990, OEM Plastic Lifter Trays and Bolts, Complete LS7 Lifters Guides & Bolts Kit and much more.

Wiseco 3.900″ Stroke Pistons for Chevy LS Engines

Forged in-house from race-proven 2618 aluminum alloy, these Wiseco pistons are available with a variety of dome configurations.

Other Posts

Diesel Fuel Pump Technology

Companies in the diesel fuel pump space are looking to keep pushing the envelope by focusing on increasing flow and pressure capabilities, durability, and functionality.

Exergy diesel fuel pump
Summit Racing Camshaft Bearing Bore Alignment Tool

The Summit Racing Cam Bearing Alignment Tool fits Gen III and Gen IV LS engines.

cam bearing tool
Kaase Racing Engines’ P-51d Cylinder Heads

Kaase Racing Engines’ new P-51d cylinder head includes concepts developed from three years of revisions and testing.

Elgin Chrysler Hemi Engine Hydraulic Lifter/Guide Assemblies

Elgin Pro-Stock OE-quality hydraulic roller lifter/guide assemblies for 2004-newer Chrysler Hemi engines without MDS cylinder deactivation.