DEI ONYX Series Product Line - Engine Builder Magazine

DEI ONYX Series Product Line

The new ONYX Series products from DEI offer heat protection for components that undergo severe duty or extreme heat. This new line combines two technologically advanced textiles into a dual layer for maximum thermal control.

ONYX product group image

The new ONYX Series products from DEI offer heat protection for components that undergo severe duty or extreme heat. This new line combines two technologically advanced textiles into a dual layer for maximum thermal control. The outer layer with its rich black finish is made from heat treated glass fiber bonded with molten aluminum then formed into a tight weave for added strength and durability. The inner layer is a high temperature resistant fabric that is 89% Silica. This all new product line provides heat protection for components up to 1350°F.

ONYX Series Black Pipe Shield – This new textile technology, combined with DEI’s unique stainless steel standoff brackets, creates an air gap providing maximum cooling and heat dissipation.  Designed to be flexible, the ONYX Shield (size 4” x 8”) fits many different applications and pipe diameters. In addition to use as a protective barrier on exhaust pipes, auto or motorcycle, the shield is recommended as a heat barrier between transmissions, brake lines, hoses, electrical wiring, gas tanks, body panels, bumpers and more. Two 3-1/2” stainless steel clamps are included and the outer edge features a surge stitch for added strength and durability. Part #010496.

ONYX Series Starter Shield –This revolutionary new shield protects starters at risk of heat soak because of excessive direct or radiant heat. The ONYX Series starter measures 7” width by 24” length and the length can be trimmed to size. The hook and loop fastening design makes it easy to install without the trouble of removing the starter. Multi-purpose in design and fit, this shield also can be used to wrap and protect most master cylinders, distributors, fuel pumps and many other components. Part #010236.

ONYX Series Black Turbo Shield – DEI’s ONYX Series Turbo Shield maintains consistent temperature in the turbo to maximize efficiency and reduce lag.  It is now available for smaller sized turbos including Garrett, Mitsubishi and others. The ONYX Series Shield is available for the T22 (part #010161) or the T25 (part #010163), or as a kit: T22 Kit (part #010162) or T25 (part #010164). The kit includes the black turbo shield made of premium heat resistant textiles and newly designed stainless steel attachment anchors, a 2” x 15’ premium roll of DEI black pipe wrap, two 20” stainless steel Locking Ties, and 5’ of stainless steel fastening wire. For specific part numbers for the Turbo Shield kit, including for the 1993 -1999 Chevy/GMC 6.5L Diesel, consult DEI.

For more information: www.DesignEngineering.com

You May Also Like

CP-Carrillo Pistons and Rods for VW/Audi

This piston and rod combination is designed as a perfect fit and meant to withstand large boost levels.

CP-Carrillo offers #SC7630 pistons and rods for the Volkswagen/Audi EA888 Gen III 2.0L TSI/TFSI engine. This engine is in numerous applications, including the VW Golf Mk7 R, Audi S3 and Audi TTS vehicles.

This piston and rod combination is designed as a perfect fit and meant to withstand large boost levels to take your engine to the next level. The pistons are made to accept 1mm larger valves, as well as deeper valve pockets to accommodate many aftermarket cams.

Eneos Racing Pro 10w-50 Oil

With Racing Pro 10w-50, a 50/50 ester mix provides exceptional wear protection, extra high horsepower, and further anti-oxidation stability.

Eneos 10w-50 motor oil
Fluidampr Performance Damper for Mazda Miata

Fluidampr performance dampers protect your engine from destructive crankshaft torsional vibration.

Fluidampr Mazda Miata damper
Mahle PowerPak Pistons for 6.0L and 6.4L Powerstroke Engines

All four sets offer incredible versatility, allowing a daily driver to become a weekend warrior for drag, dyno, or pulling competitions.

Point One Small Block Chevy Head Stud Kit

Point One’s E190 head studs boast an impressive 190,000 psi nominal tensile strength.

Cadillac Supercharged LS engine

Other Posts

Weinle Motorsports Sheet Metal Intakes

These custom aluminum sheet metal intakes are built to your specs.

Peterson Fluid Systems’ Fat Boy Dirt Late Model Oil Tank

Peterson Fluid Systems’ new 08-0919 Fat Boy Dirt Late Model Oil Tank provides engine builders with more oil capacity when chassis space is limited. With a lower profile design and all the standard features of their race-proven DLM tanks, this tank is 18.62” tall with a 5-gallon capacity. Related Articles – Total Seal Severe-Duty High-Performance Diesel Rings

Total Seal Severe-Duty High-Performance Diesel Rings

New Total Seal diesel ring sets are available for Cummins 5.9L and 6.7L, Duramax 6.6L, Powerstroke 6.4L to 7.3L, and custom sets.

K1 Toyota Supra / BMW B58 Connecting Rods

Forged from 4340 steel and machined within precise tolerances, these connecting rods for the B58 boast a winning combination of features.