Solvent Kleene D-Zolve 339 - Engine Builder Magazine

Solvent Kleene D-Zolve 339

D-Zolve 339 from Solvent Kleene, Inc. is an industrial grade carbon dissolver that removes carbon and burnt on oil deposits produced by engine combustion. Parts can either be placed in an immersion tank at room temperature, or it can be applied to a surface via spray.

pistonafter

D-Zolve 339 from Solvent Kleene, Inc. is an industrial grade carbon dissolver that removes carbon and burnt on oil deposits produced by engine combustion. Parts can either be placed in an immersion tank at room temperature, or it can be applied to a surface via spray. D-Zolve is suitable for use with all ferrous and non-ferrous metals including aluminum carbon steel, stainless steel, titanium, magnesium and others. D-Zolve 339 does not require any wastewater treatment, dust-control, or air scrubbing equipment.

In an immersion tank, the cleaner dissolves and emulsifies difficult to remove oils and carbon deposits. Adding agitation to the immersion tank significantly accelerates the cleaning process. The product’s advanced chemistry enables it to break the bond between the deposits left following combustion and the metal substrate. Devoid of any water content, it will not promote oxidation.

D-Zolve 339 is designed to minimize health and safety hazards. It contains no halogens and no CFCs. It is non-flammable, non-corrosive, and non-ozone depleting. Used at room temperature, no heating is required.

D-Zolve 339  is available in both 55-gallon drums and 5-gallon pails.

For more information: (978) 531-2279; Fax (978) 532-9304; e-mail [email protected].

You May Also Like

UEM Icon 5.3L EcoTec3 L83 Gen V GDI Pistons

The piston line features forged 4032 alloy for NA and 2618 alloy for boosted applications.

UEM Icon pistons

UEM Pistons’ Icon GM Gen V GM truck 5.3L EcoTec3 L83 GDI offerings are specifically engineered for heavy towing and boost applications. The piston line features forged 4032 alloy for NA and 2618 alloy for boosted applications.

Additionally, these pistons fit stock 6.098" rods and aftermarket 6.125" rod combinations, offer dual forced-pin oiling, a type 3 hard anodized crown and top ring groove for increased service life, UEM’s UltraWear M42 skirt coating, and a complete ring kit featuring a steel gas-nitrided top ring. 

CHE Ford Godzilla Trunnion Kit

The kit includes 16 heat-treated steel trunnions, 32 bronze bushings, and 33 retainer clips.

CHE trunnion kit
Rislone DEF Crystal Clean

First-of-its-kind product removes damaging crystals from SCR systems, clears P20EE codes.

Rislone DEF Crystal Clean
Pistal High Compression 100mm Drop-in Piston Kit

Made from forged aluminum, these Pistal pistons are both light and have high resistance.

Pistal pistons
B&B Performance Adjustable Billet Timing Pointers

Available for SBC, BBC and SBF, pointers come with stainless steel pointer, fasteners and a black anodized finish.

timing pointers

Other Posts

Holley Sniper 2 EFI

Holley’s Sniper 2 EFI ushers in a wide range of new technologies and features.

Holley Sniper 2 EFI
Arrow Pit Carts

Arrow has standard configurations available as well as options that can be fine-tuned to suit your needs.

Silver Seal Stainless Steel Engine Oiler

It features a larger capacity 2-gallon stainless steel tank and large easy-to-fill cap.

engine oiler
Graymills CTU SonicMAX Ultrasonic Cleaning System

The console’s small footprint make these units ideal for job site “cell” cleaning applications or where space is critical.

graymills cleaning