FUELAB 529XX Series Electronic Fuel Pressure Regulators - Engine Builder Magazine

FUELAB 529XX Series Electronic Fuel Pressure Regulators

FUELAB 529XX Series Electronic Fuel Pressure Regulators work directly with FUELAB Prodigy fuel pumps to control pump speed. Thereby, reducing heat build-up and vapor lock conditions related to street and strip operation.

FUELAB 529XX Series Electronic Fuel Pressure Regulator

FUELAB 529XX Series Electronic Fuel Pressure Regulators work directly with FUELAB Prodigy fuel pumps to control pump speed. Thereby, reducing heat build-up and vapor lock conditions related to street and strip operation.

Just like standard EFI regulators, the high flow 529 Series regulators relieve pressure (back to the fuel tank) once the set pressure is achieved: As a higher volume of fuel is sent through the regulator, it reduces the excess flow back to the fuel tank. FUELAB’s patented electronic regulator takes this action one step further by placing a restriction valve along the return line. This valve is fitted with electronics to monitor pressure and then control the FUELAB Prodigy Fuel Pump accordingly.

If the regulator senses pressure is too high, then the Prodigy Pump is signaled to slow down. If the pressure is too low, then the pump is signaled to speed up. This action not only allows the pump to operate at a reduced amount speed with low engine output, but also allows the return line flow rate to be relatively constant. Another special feature of the 529 Series regulators is a 0-5 volt reference output that can be used for diagnostics and data logging (proportional to pump speed).

With the new FUELAB demand based system, true pump control is finally achievable. The system is easy to install with no calibration required.

For more information: fuelab.com or call (618) 344-3300.

You May Also Like

Check Out What’s New at Dura-Bond Bearing

New transmission bearings, cam bearings and valve seat options.

We caught up Dura-Bond Bearing's Bill Dolak at the 2023 PRI Show to get a run down of what we can expect from the bearing company in 2024. Dura-Bond has new transmission kits, new cam bearings for the LS3 and Ford Godzilla engines, and a new copper-infiltrated powder metal valve seat, among plenty more.

ARP Special Chaser Taps

ARP has expanded its tap offerings to include some 22 different sizes.

ARP chaser taps
Summit Racing Forged Pro Pistons

Made in the USA, Summit Racing Forged Pro Pistons are made using ultra-modern technology and materials so they’re stronger and lighter.

CP-Carrillo Pistons and Rods for VW/Audi

This piston and rod combination is designed as a perfect fit and meant to withstand large boost levels.

Eneos Racing Pro 10w-50 Oil

With Racing Pro 10w-50, a 50/50 ester mix provides exceptional wear protection, extra high horsepower, and further anti-oxidation stability.

Eneos 10w-50 motor oil

Other Posts

Fluidampr Performance Damper for Mazda Miata

Fluidampr performance dampers protect your engine from destructive crankshaft torsional vibration.

Fluidampr Mazda Miata damper
Mahle PowerPak Pistons for 6.0L and 6.4L Powerstroke Engines

All four sets offer incredible versatility, allowing a daily driver to become a weekend warrior for drag, dyno, or pulling competitions.

Point One Small Block Chevy Head Stud Kit

Point One’s E190 head studs boast an impressive 190,000 psi nominal tensile strength.

Cadillac Supercharged LS engine
Weinle Motorsports Sheet Metal Intakes

These custom aluminum sheet metal intakes are built to your specs.