Snap-on Essentials for the Shop - Engine Builder Magazine

Snap-on Essentials for the Shop

Tools matter when it comes to getting the job done right, and Snap-on continues to be at the forefront of innovation, developing new solutions to ensure engine builders are ready for even the most challenging task.

Tools matter when it comes to getting the job done right, and Snap-on continues to be at the forefront of innovation, developing new solutions to ensure engine builders are ready for even the most challenging task. Whether the job is a simple oil change or a complicated electrical issue, Snap-on has the essential tools hard-working engine builders can rely on.

To kick start the summer, here are a few new Snap-on tools that will benefit techs and shops:

OFS2432_v2

      1)    Snap-on OFS2432 Oil Filter Housing Flip Socket

The dual size flip socket is designed for versatility in removing and installing filter caps on various U.S. and import 2001 to 2014 vehicles including Chrysler, Dodge, Jeep, Ram, Audi, Lamborghini, Mercedes-Benz, Porsche and Volkswagen.

PLP300

      2)    Snap-on PLP300 3-Piece Precision Plier Set

The PLP300 plier set is designed to minimize hand fatigue with an internal torsion spring that returns the pliers to the opening position. The oval head diagonal cutting pliers (P87150), serrated jaws snipe nose (P91045) and needle nose pliers (P92055) in the set have minimal friction and maximum jaw alignment. These pliers are made of ball-bearing grade steel and built to withstand greater impact than competitive models.

SO86BRZ

      3)    Snap-on SO86_Series Gasket Knives

A Trac-Tec grip in the handle of the SO86_Series gasket knives makes them a sure fit for wet working conditions. The black DLC coated N690 steel blade measures 2 5/8-inches and is available for right- or left-handed carry with Speedsafe smooth, one-handed opening. The knives come in red, blue, bronze or black and have a lanyard hole at the end of the handle. When closed, the SO86 measures four inches to store easily in a pocket.

WINS100O

     4)    Snap-on WINS100R, WINS100O and WINS100G Wire Insertion Tool Set

This five-piece set makes working with wires easier for techs. The radius handle end allows wire sheathing to be pulled smoothly without damage. This wire insertion tool set is a must-have for work on RVs, trailers, aviation and marine equipment, remote starters and alarm systems.

For more information: www.snapon.com

You May Also Like

CP-Carrillo Pistons and Rods for VW/Audi

This piston and rod combination is designed as a perfect fit and meant to withstand large boost levels.

CP-Carrillo offers #SC7630 pistons and rods for the Volkswagen/Audi EA888 Gen III 2.0L TSI/TFSI engine. This engine is in numerous applications, including the VW Golf Mk7 R, Audi S3 and Audi TTS vehicles.

This piston and rod combination is designed as a perfect fit and meant to withstand large boost levels to take your engine to the next level. The pistons are made to accept 1mm larger valves, as well as deeper valve pockets to accommodate many aftermarket cams.

Eneos Racing Pro 10w-50 Oil

With Racing Pro 10w-50, a 50/50 ester mix provides exceptional wear protection, extra high horsepower, and further anti-oxidation stability.

Eneos 10w-50 motor oil
Fluidampr Performance Damper for Mazda Miata

Fluidampr performance dampers protect your engine from destructive crankshaft torsional vibration.

Fluidampr Mazda Miata damper
Mahle PowerPak Pistons for 6.0L and 6.4L Powerstroke Engines

All four sets offer incredible versatility, allowing a daily driver to become a weekend warrior for drag, dyno, or pulling competitions.

Point One Small Block Chevy Head Stud Kit

Point One’s E190 head studs boast an impressive 190,000 psi nominal tensile strength.

Cadillac Supercharged LS engine

Other Posts

Weinle Motorsports Sheet Metal Intakes

These custom aluminum sheet metal intakes are built to your specs.

Peterson Fluid Systems’ Fat Boy Dirt Late Model Oil Tank

Peterson Fluid Systems’ new 08-0919 Fat Boy Dirt Late Model Oil Tank provides engine builders with more oil capacity when chassis space is limited. With a lower profile design and all the standard features of their race-proven DLM tanks, this tank is 18.62” tall with a 5-gallon capacity. Related Articles – Total Seal Severe-Duty High-Performance Diesel Rings

Total Seal Severe-Duty High-Performance Diesel Rings

New Total Seal diesel ring sets are available for Cummins 5.9L and 6.7L, Duramax 6.6L, Powerstroke 6.4L to 7.3L, and custom sets.

K1 Toyota Supra / BMW B58 Connecting Rods

Forged from 4340 steel and machined within precise tolerances, these connecting rods for the B58 boast a winning combination of features.