Snap-on Magnetic Holders - Engine Builder Magazine

Snap-on Magnetic Holders

Technicians don’t have time to waste searching for tools when they're busy. To make life in the shop easier, Snap-on has created an array of tool organization options that are key in maintaining a productive and safe work environment.

12MSWHLDR_w_tools

Technicians don’t have time to waste searching for tools when they’re busy. To make life in the shop easier, Snap-on has created an array of tool organization options that are key in maintaining a productive and safe work environment.

The latest innovation to hold sockets and wrenches in place for quick access are three new magnetic holders (38MSWHLDR, 14MSWHLDR and 12MSWHLDR) that attach directly to tool storage units.

12MSWHLDR

Manufactured with high-impact Nylon 66 plastic, the magnetic socket and wrench holders resist oil and grease to keep tools from slipping. All three models feature replaceable clips if lost or broken and are equipped with eight powerful magnets covered with protective foam to hold the rails in place on any ferrous metal surface.

The rail body that affixes to a metal surface is made of strong and corrosion resistant aluminum, so it works in shops no matter the conditions or temperature. A ball detent on each socket holder makes the positioning firm with a tight hold to keep tools from sliding out of place.

Available in 1/4-inch (14MSWHLDR), 3/8-inch (38MSWHLDR) and 1/2-inch (12MSWHLDR), these magnetic holders are designed for SAE and Metric sockets and wrenches.

For more information: www.snapon.com.

You May Also Like

CP-Carrillo Pistons and Rods for VW/Audi

This piston and rod combination is designed as a perfect fit and meant to withstand large boost levels.

CP-Carrillo offers #SC7630 pistons and rods for the Volkswagen/Audi EA888 Gen III 2.0L TSI/TFSI engine. This engine is in numerous applications, including the VW Golf Mk7 R, Audi S3 and Audi TTS vehicles.

This piston and rod combination is designed as a perfect fit and meant to withstand large boost levels to take your engine to the next level. The pistons are made to accept 1mm larger valves, as well as deeper valve pockets to accommodate many aftermarket cams.

Eneos Racing Pro 10w-50 Oil

With Racing Pro 10w-50, a 50/50 ester mix provides exceptional wear protection, extra high horsepower, and further anti-oxidation stability.

Eneos 10w-50 motor oil
Fluidampr Performance Damper for Mazda Miata

Fluidampr performance dampers protect your engine from destructive crankshaft torsional vibration.

Fluidampr Mazda Miata damper
Mahle PowerPak Pistons for 6.0L and 6.4L Powerstroke Engines

All four sets offer incredible versatility, allowing a daily driver to become a weekend warrior for drag, dyno, or pulling competitions.

Point One Small Block Chevy Head Stud Kit

Point One’s E190 head studs boast an impressive 190,000 psi nominal tensile strength.

Cadillac Supercharged LS engine

Other Posts

Weinle Motorsports Sheet Metal Intakes

These custom aluminum sheet metal intakes are built to your specs.

Peterson Fluid Systems’ Fat Boy Dirt Late Model Oil Tank

Peterson Fluid Systems’ new 08-0919 Fat Boy Dirt Late Model Oil Tank provides engine builders with more oil capacity when chassis space is limited. With a lower profile design and all the standard features of their race-proven DLM tanks, this tank is 18.62” tall with a 5-gallon capacity. Related Articles – Total Seal Severe-Duty High-Performance Diesel Rings

Total Seal Severe-Duty High-Performance Diesel Rings

New Total Seal diesel ring sets are available for Cummins 5.9L and 6.7L, Duramax 6.6L, Powerstroke 6.4L to 7.3L, and custom sets.

K1 Toyota Supra / BMW B58 Connecting Rods

Forged from 4340 steel and machined within precise tolerances, these connecting rods for the B58 boast a winning combination of features.