Snap-on Lithium Ion Compact Engine Starter - Engine Builder Magazine

Snap-on Lithium Ion Compact Engine Starter

The new Snap-on EEJP200M Lithium Ion Compact Engine Starter is perfect for personal use when a jump is needed, yet powerful enough for busy shops. The EEJP200M can be used on a wide range of powersport, motorcycle and four- to eight-cylinder vehicles.

eejp200m_photo

The new Snap-on EEJP200M Lithium Ion Compact Engine Starter is perfect for personal use when a jump is needed, yet powerful enough for busy shops.

The EEJP200M can be used on a wide range of powersport, motorcycle and four- to eight-cylinder vehicles. It can start vehicles in below freezing conditions, as well as in intense heat settings ranging -5–130 °F.

The EEJP200M goes to work where needed and its on-screen commands guide the user through operation. A smart safety component is the bright LED work light that also functions as a first responder SOS flash.

eejp200m_with_charger_and_clamps

When installed with an optional OBDII cable, the EEJP200M also becomes a memory saver. The unit provides 12 volts of power to a vehicle that enables techs to save radio settings, seat positions, keyless entry codes and DTC’s when the vehicle battery is disconnected during service.

The EEJP200M has a two-amp USB port that operates as a power source to charge cell phones, tablets and other devices. The internal battery can be charged with an AC wall cable or DC cable from a vehicle, both included.

Additional optional accessories include a carrying case and 12V DC Port.

For more information: www.snapon.com or 877-SNAPON-4 (877-762-7664).

You May Also Like

Summit Racing Camshaft Bearing Bore Alignment Tool

The Summit Racing Cam Bearing Alignment Tool fits Gen III and Gen IV LS engines.

cam bearing tool

When you’re installing new cam bearings in an LS engine block, the first four (from back to front of the engine) are usually no problem. That’s because the block helps keep the cam bearing installation tool centered in the bearing bores. But when it comes to the front cam bearing, there is nothing to keep the installation tool centered in the bore. That means the chances of that bearing going in cockeyed are pretty high.

Kaase Racing Engines’ P-51d Cylinder Heads

Kaase Racing Engines’ new P-51d cylinder head includes concepts developed from three years of revisions and testing.

Elgin Chrysler Hemi Engine Hydraulic Lifter/Guide Assemblies

Elgin Pro-Stock OE-quality hydraulic roller lifter/guide assemblies for 2004-newer Chrysler Hemi engines without MDS cylinder deactivation.

Isky Dual Valve Spring Set

These sets feature drop-in installation and are wound from chrome silicon wire.

Holley’s Sniper 2 EFI Platform Gains Bluetooth Capability

Tech advancement brings even greater affordability and ease of use to Holley’s popular Sniper 2 EFI ecosystem.

Other Posts

Klotz Announces 2024 Product Catalog

By the time Klotz products reach your engine, it’s spent countless hours on the dyno and proven on the racetrack.

Pakelo Racing Transmission DLS A Lubricant

This product is Pakelo’s baseline IndyCar gearbox lubricant. It provides outstanding performance and greatly reduces drivetrain loss.

Scribner Plastics’ Cylinder Head Containers

Scribner Plastics’ cylinder head storage/shipping container fits small block, big block and most Pro Stock cylinder heads.

Breather Valley Plates for LS Engines by LS Classic

Precision machined from aluminum, these plates replace the stock valley plates found on Gen III and Gen IV LS engines.