FRAM Racing Oil Filter Line - Engine Builder Magazine

FRAM Racing Oil Filter Line

FRAM has announced the availability of its new Racing Oil Filter product line. The new filters are ideal for use in racing and high-performance streetcars, and designed to help provide the winning edge in extreme operating conditions.

hp17_front

FRAM has announced the availability of its new Racing Oil Filter product line. The new filters are ideal for use in racing and high-performance streetcars, and designed to help provide the winning edge in extreme operating conditions.

The operation of high-performance vehicles puts tremendous pressure on the engine. To overcome these challenging operating conditions, FRAM Racing Oil Filters offer a number of performance-enhancing features, including a heavy-gauge tapping plate and extra-thick* outer shell that withstands high-pressure flexing. FRAM designed its new Racing Oil Filters with a screen-over by-pass valve for protection against larger contaminants (not included on HP17 or HP6 models), steel end caps, and a spiral-shaped center tube to protect against filter collapse. With a maximum burst pressure of 350 to 500 psi** and maximum operating pressure of 200 psi**, these new filters can withstand demanding racing conditions.

“We understand and are in tune with the wants and needs of the racing and high-performance automobile markets,” said Jay M. Buckley, Director, Technical Training for FRAM. “We have taken their strict requirements for oil-filter performance into consideration when designing our new Racing Oil Filters, and are confident that they will satisfy the need for reliable, standard-setting performance in demanding automotive applications.”

FRAM Racing Oil Filters also feature a number of standard-setting innovations that help improve engine performance in high-leverage operating conditions, such as a 22-psi filter bypass valve; low-restriction racing media that delivers high oil flow; 94% efficiency at 20 microns*** for excellent engine protection; maximum oil flow rate of 10 to 18 gpm, depending on filter model; and a silicone anti-drain back valve on some models.

FRAM Racing Oil Filters are compatible with all oil types and are available in 13 different model sizes. This wide range of models enables the filters to be used with various vehicle makes and models, including all late model high performance engines.

For more information: www.fram.com or 800-890-2075.

You May Also Like

CP-Carrillo Pistons and Rods for VW/Audi

This piston and rod combination is designed as a perfect fit and meant to withstand large boost levels.

CP-Carrillo offers #SC7630 pistons and rods for the Volkswagen/Audi EA888 Gen III 2.0L TSI/TFSI engine. This engine is in numerous applications, including the VW Golf Mk7 R, Audi S3 and Audi TTS vehicles.

This piston and rod combination is designed as a perfect fit and meant to withstand large boost levels to take your engine to the next level. The pistons are made to accept 1mm larger valves, as well as deeper valve pockets to accommodate many aftermarket cams.

Eneos Racing Pro 10w-50 Oil

With Racing Pro 10w-50, a 50/50 ester mix provides exceptional wear protection, extra high horsepower, and further anti-oxidation stability.

Eneos 10w-50 motor oil
Fluidampr Performance Damper for Mazda Miata

Fluidampr performance dampers protect your engine from destructive crankshaft torsional vibration.

Fluidampr Mazda Miata damper
Mahle PowerPak Pistons for 6.0L and 6.4L Powerstroke Engines

All four sets offer incredible versatility, allowing a daily driver to become a weekend warrior for drag, dyno, or pulling competitions.

Point One Small Block Chevy Head Stud Kit

Point One’s E190 head studs boast an impressive 190,000 psi nominal tensile strength.

Cadillac Supercharged LS engine

Other Posts

Weinle Motorsports Sheet Metal Intakes

These custom aluminum sheet metal intakes are built to your specs.

Peterson Fluid Systems’ Fat Boy Dirt Late Model Oil Tank

Peterson Fluid Systems’ new 08-0919 Fat Boy Dirt Late Model Oil Tank provides engine builders with more oil capacity when chassis space is limited. With a lower profile design and all the standard features of their race-proven DLM tanks, this tank is 18.62” tall with a 5-gallon capacity. Related Articles – Total Seal Severe-Duty High-Performance Diesel Rings

Total Seal Severe-Duty High-Performance Diesel Rings

New Total Seal diesel ring sets are available for Cummins 5.9L and 6.7L, Duramax 6.6L, Powerstroke 6.4L to 7.3L, and custom sets.

K1 Toyota Supra / BMW B58 Connecting Rods

Forged from 4340 steel and machined within precise tolerances, these connecting rods for the B58 boast a winning combination of features.