Snap-on Air Drills - Engine Builder Magazine

Snap-on Air Drills

The new Snap-on PDR2500 and PDR2501 ¼” Micro Reversible Air Drills are small enough for techs to easily tackle work in cramped engine compartments. Despite the smaller size, these drills have the torque to handle most automotive and body applications while mastering consistent runout of less than .010”.

dsc_9859-clean

The new Snap-on PDR2500 and PDR2501 ¼” Micro Reversible Air Drills are small enough for techs to easily tackle work in cramped engine compartments. Despite the smaller size, these drills have the torque to handle most automotive and body applications while mastering consistent runout of less than .010”.

“The big news about these micro drills is how they will quickly become a technician’s ‘go-to’ for working in tight spaces,” says Rodger Isetts, product manager at Snap-on. “When you couple that with 1/4 horsepower of torque and a two-year warranty, it’s newsworthy. As is the fact that these drills are accurate time and time again, especially when you’re working with materials like stainless steel. The runout for these drills is consistent across all materials, whether you’re drilling, reaming or honing.”

pdr2501

Each weighing 1.5 pounds, the PDR2500 has a keyed chuck, and the PDR2501 is a keyless chuck. Both offer one-handed forward/reverse with slow start-up and variable speed trigger for better control. The handle exhaust directs air downward, and both models have a comfort cushion grip. The drills contain ball and needle bearing spindle components and machined planetary gears to balance the load.

For more information: www.snapon.com

You May Also Like

Summit Racing Camshaft Bearing Bore Alignment Tool

The Summit Racing Cam Bearing Alignment Tool fits Gen III and Gen IV LS engines.

cam bearing tool

When you’re installing new cam bearings in an LS engine block, the first four (from back to front of the engine) are usually no problem. That’s because the block helps keep the cam bearing installation tool centered in the bearing bores. But when it comes to the front cam bearing, there is nothing to keep the installation tool centered in the bore. That means the chances of that bearing going in cockeyed are pretty high.

Kaase Racing Engines’ P-51d Cylinder Heads

Kaase Racing Engines’ new P-51d cylinder head includes concepts developed from three years of revisions and testing.

Elgin Chrysler Hemi Engine Hydraulic Lifter/Guide Assemblies

Elgin Pro-Stock OE-quality hydraulic roller lifter/guide assemblies for 2004-newer Chrysler Hemi engines without MDS cylinder deactivation.

Isky Dual Valve Spring Set

These sets feature drop-in installation and are wound from chrome silicon wire.

Holley’s Sniper 2 EFI Platform Gains Bluetooth Capability

Tech advancement brings even greater affordability and ease of use to Holley’s popular Sniper 2 EFI ecosystem.

Other Posts

Klotz Announces 2024 Product Catalog

By the time Klotz products reach your engine, it’s spent countless hours on the dyno and proven on the racetrack.

Pakelo Racing Transmission DLS A Lubricant

This product is Pakelo’s baseline IndyCar gearbox lubricant. It provides outstanding performance and greatly reduces drivetrain loss.

Scribner Plastics’ Cylinder Head Containers

Scribner Plastics’ cylinder head storage/shipping container fits small block, big block and most Pro Stock cylinder heads.

Breather Valley Plates for LS Engines by LS Classic

Precision machined from aluminum, these plates replace the stock valley plates found on Gen III and Gen IV LS engines.