Allied Machine GEN3SYS XT Pro Line of Inserts and Holders - Engine Builder Magazine

Allied Machine GEN3SYS XT Pro Line of Inserts and Holders

Allied Machine & Engineering, a manufacturer of holemaking and finishing tooling systems, has announced its new GEN3SYS XT Pro line of high penetration drilling products. The product line features enhanced holders and inserts with three unique geometries, and two advanced coatings.

Allied Machine & Engineering, a manufacturer of holemaking and finishing tooling systems, has announced its new GEN3SYS XT Pro line of high penetration drilling products. The product line features enhanced holders and inserts with three unique geometries, and two advanced coatings. Combining specific geometries and coatings to create the optimal solution for different machining materials, this next level of the GEN3SYS high penetration drilling product line delivers top results.

GEN3SYS XT Pro inserts have been designed specifically for ISO material classes, making tool selection easy. They are offered for steels (class P), cast irons (class K), and non-ferrous materials (class N). The drill inserts come in diameters ranging from 11 mm (.4331 inches) to 35 mm (1.378 inches), and are available in .1 mm (.004 inch) increments. The inserts designed specifically for steel and cast iron have new AM400 series coatings, which provides increased wear resistance and tool life. Inserts for non-ferrous materials are coated with titanium nitride (TiN).

Holders for the GEN3SYS XT Pro line are offered in depth-to-diameter ratios of 3xD, 5xD, 7xD, and a new 10xD. These newly designed holders feature an enhanced flute design that improves chip evacuation and an updated coolant configuration that increases flow and directs additional coolant to the cutting zone. The GEN3SYS XT Pro holders are available in both imperial and metric shank diameters.

For more information: www.alliedmachine.com.

You May Also Like

Wiseco 3.900″ Stroke Pistons for Chevy LS Engines

Forged in-house from race-proven 2618 aluminum alloy, these Wiseco pistons are available with a variety of dome configurations.

Wiseco has developed 3.900” stroke pistons for Chevy LS engines for use with aftermarket crankshafts. With bore sizes ranging from 3.780” to 4.185” it offers potential displacements from 350 to 429 cubic inches. Forged in-house from race-proven 2618 aluminum alloy, these pistons are available with a variety of dome configurations providing a compression ratio of 9.1:1 to 13.4:1 – ideal for naturally aspirated and boosted applications.

Summit Racing Camshaft Bearing Bore Alignment Tool

The Summit Racing Cam Bearing Alignment Tool fits Gen III and Gen IV LS engines.

cam bearing tool
Kaase Racing Engines’ P-51d Cylinder Heads

Kaase Racing Engines’ new P-51d cylinder head includes concepts developed from three years of revisions and testing.

Elgin Chrysler Hemi Engine Hydraulic Lifter/Guide Assemblies

Elgin Pro-Stock OE-quality hydraulic roller lifter/guide assemblies for 2004-newer Chrysler Hemi engines without MDS cylinder deactivation.

Isky Dual Valve Spring Set

These sets feature drop-in installation and are wound from chrome silicon wire.

Other Posts

Holley’s Sniper 2 EFI Platform Gains Bluetooth Capability

Tech advancement brings even greater affordability and ease of use to Holley’s popular Sniper 2 EFI ecosystem.

Klotz Announces 2024 Product Catalog

By the time Klotz products reach your engine, it’s spent countless hours on the dyno and proven on the racetrack.

Pakelo Racing Transmission DLS A Lubricant

This product is Pakelo’s baseline IndyCar gearbox lubricant. It provides outstanding performance and greatly reduces drivetrain loss.

Scribner Plastics’ Cylinder Head Containers

Scribner Plastics’ cylinder head storage/shipping container fits small block, big block and most Pro Stock cylinder heads.