Hot Shot’s Secret Diesel Extreme Fuel Additive - Engine Builder Magazine

Hot Shot’s Secret Diesel Extreme Fuel Additive

Diesel owners are turning to Hot Shot’s Secret Diesel Extreme to restore a truck’s original power. With one dose, Diesel Extreme cleans out fuel tanks, lines and injectors, removes moisture, boosts cetane, lubricates the fuel pump and injectors, neutralizes acid and restores fuel economy and power back to the vehicle’s original performance.

Diesel owners are turning to Hot Shot’s Secret Diesel Extreme to restore a truck’s original power. With one dose, Diesel Extreme cleans out fuel tanks, lines and injectors, removes moisture, boosts cetane, lubricates the fuel pump and injectors, neutralizes acid and restores fuel economy and power back to the vehicle’s original performance.

Diesel Extreme contains 4X more cetane booster than leading competitors, as well as a top tier lubricity additive and fuel stabilizer to provide maximum performance while cleaning the fuel system. Diesel Extreme is also a fully formulated concentrated cleaner that removes all types of Internal Diesel Injector Deposits (IDIDs), including waxy and polymeric deposits. The removal of IDIDs restores the injector’s fuel spray pattern to help optimize the combustion process; resulting in a complete fuel burn and increased efficiency.

Diesel Extreme’s deep clean provides six months of protection and benefits to keep engines running strong. To maintain system cleanliness and performance between Diesel Extreme treatments, use Hot Shot’s Secrets Everyday Diesel Treatment (EDT) additive with each fill to the fuel tank. EDT is a highly concentrated cetane improver that greatly improves power and performance in all diesel equipment, increases fuel economy and lowers maintenance costs.

Diesel Extreme is extremely effective in diesel fuels for improving combustion and ignition efficiency, enhancing fuel economy and maintaining fuel in a clean, stabilized condition. Trusted in the performance industry both on the road and the drag strip, Diesel Extreme is the official fuel additive of the NHRDA, and is safe in all diesel engines: semi-trucks, pick-up trucks, automobiles, farm equipment and marine applications. These engines include, but are not limited to, Ford Power Stroke, Cummins, GM Duramax, Saab, Caterpillar, International, Detroit, Volkswagen and Audi.

Recent testing of Diesel Extreme in a FedEx commissioned box truck equipped with a 6.7L Cummins at The Ohio State University proved a 5.1% increase in fuel economy.

For more information: www.hotshotsecret.com.

You May Also Like

Carrillo Forged Pistons and Connecting Rods for Ford 7.3L Godzilla

These pistons are forged from 2618T aluminum alloy and machined on dedicated CNC machine cells to tight tolerances. 2618 aluminum has a lower silicon content than other alloys. That makes the pistons stronger and more ductile—perfect for high-load, high-stress applications like superchargers, turbochargers, or nitrous oxide.  Other features include:• Rated to handle up to 1,500

These pistons are forged from 2618T aluminum alloy and machined on dedicated CNC machine cells to tight tolerances. 2618 aluminum has a lower silicon content than other alloys. That makes the pistons stronger and more ductile—perfect for high-load, high-stress applications like superchargers, turbochargers, or nitrous oxide. 

Other features include:• Rated to handle up to 1,500 horsepower• -21.1cc dish with two valve reliefs• Lateral gas-ported to maintain tighter piston-to-bore clearances for better sealing• 10.5:1 compression on E85 with 1.338-inch compression height• .990-inch chromoly wristpins for use with wire locks• Choice of 4.225- or 4.250-inch bore sizes

Fluidampr Harmonic Damper from Summit Racing Equipment

The factory harmonic damper on your modern GM, Ford, or Mopar V8 are ‘tuned’ to absorb what’s called torsional vibration in the engine’s normal operating RPM range. Performance modifications, particularly ones that increase torque, produce added vibration in an RPM range that the elastomer damper wasn’t designed to handle. That vibration will accelerate component wear,

Elgin OE Replacement MLS Head Gaskets for Ford 6.7L Diesel Engines

Elgin Industries has introduced original equipment replacement multi-layer-steel head gaskets for 2011-2020 Ford 6.7L diesel engines. Related Articles – Turbosmart TS-1 Externally Wastegated Turbocharger – FuelTech FT600 EFI System – Trick Flow Specialties DHC 200 Aluminum Cylinder Heads The new gaskets – EHG-26661 (left) and EHG-26662 (right) – match the design, fitment and quality of

Starrett Introduces Easy-to-Use Precision Wireless Electronic Depth Gages

The L.S. Starrett Company, a leading global manufacturer of precision measuring tools and gages, metrology systems and more, has introduced three Wireless Electronic Depth Gages including the W640JZ, W643JZ, and W644JZ which are made in the U.S.A., part of a line of over 40 new electronic precision gages that Starrett recently introduced to the market.

PBM Rotating Assemblies

PBM rotating assemblies have a proven reputation of quality, durability and performance.

Other Posts

Warren Diesel Injection’s New 6.0L Powerstroke Race Engine

Jesse Warren and his team are synonymous with the Ford Powerstroke platform, specifically the 6.0L. As such, Jesse’s team at Warren Diesel Injection continues to push the envelope of the 6.0L Powerstroke and recently unveiled a new race truck at the 2023 Ultimate Callout Challenge. Find out what went into this 3-year-long build! Related Articles

Compound-Turbo “Shredder” 5.9L Cummins Engine

Like any sensible diesel guy, Chris Voorheis got a small taste of diesel performance and immediately wanted more. His 2006 Mega Cab went from a daily driver to a sled puller to now a formidable drag racing vehicle thanks to a compound-turbo “Shredder” 5.9L Cummins from Industrial Injection. Check out what went into the build!

Turbocharged 6.0L Powerstroke Engine

With a last name of Ford, it’s a good thing Dylan Ford of Abilene Diesel Performance is a Powerstroke guy. In fact, he’s found a true passion for 6.0L Powerstrokes and recently built a race truck with a turbocharged and nitrous-assisted 6.0L Powerstroke for drag racing. Check it out!

All About Those Valves

We recently sat down with Ryan Hamilton and Phil Data of SBI, as well as D&J Precision Machine owner Drew Pumphrey to talk about everything valves – problem areas, materials, sizes, angles, valve jobs, seats, and even springs. Check out this latest Intellectual Horsepower episode brought to you by SBI. Related Articles – Pat Musi