GM LS Camshaft Sprocket & Phaser Installation Tips from Melling - Engine Builder Magazine

GM LS Camshaft Sprocket & Phaser Installation Tips from Melling

In this Melling tech tip video, technical director George Richmond reviews the proper procedure for GM LS camshaft sprocket and phaser installation.

Sunnen’s Newest Honing Equipment Highlights

As Sunnen Products Co. celebrates 100 years in the industry in 2024, Tom Dustman, sales director for Sunnen, and other Sunnen team members were at the 2023 PRI Show to showcase the latest Sunnen equipment, including the SV-35 and SV-15 honing machines to engine builders and machinists.

As Sunnen Products Co. celebrates 100 years in the industry in 2024, Tom Dustman, sales director for Sunnen, and other Sunnen team members were at the 2023 PRI Show to showcase the latest Sunnen equipment, including the SV-35 and SV-15 honing machines to engine builders and machinists.

Steve Morris Engines’ Twin-Supercharged 454 Big Block Chevy Engine

It had been 26 years since the last time Val Morris, Steve Morris’ wife, was behind the wheel of a drag car. The shop had been working on this project car named Sugar Momma, and got it done in time for Sick Week 2024. When it came time to figure out who’d drive it, Steve

Scheid Diesel is a Diesel Mecca

We recently made the drive to Terre Haute, IN to visit Scheid Diesel and owner Dan Scheid. This diesel engine and machine shop is one of three locations Scheid operates, and has the capability to everything in-house from fuel lines and injector work to machining and general repair and much more. Check out why Scheid

Stuffing a Supercharged 572 cid SMX Engine in a Porsche 928

For Danny Humphreys, drag racing is a progressive disease. Ever since he watched Tom Cruise outrun a pimp in a 928 Porsche, he’s wanted the car for himself. As soon as he got one, he pulled the engine and the horsepower has gone up from there. Today, Danny has a supercharged 572 cid SMX engine

Indy Cylinder Head’s Supercharged 588 cid Hemi Engine

We’ve been following Indy Cylinder Head and the engine work Ken Lazzeri for quite some time. We got a chance to speak with Ken on the final day of the PRI show when he was kind enough to walk us through the details of several of the engines they had on display, including this bracket

Ken Lazzeri Hemi Engine

Other Posts

Melling Chromoly Oil Pump Steel Gerotors for Ford 5.0L DOHC

These chromoly steel gerotors offer increased tensile strength and toughness. Recommended for race and power-added applications.

melling oil pump gerator
Summit Racing Big Block Chevy Hydraulic Roller Camshafts

Made in the USA from billet bearing steel and finished on Landis grinders, the cams have a 4/7 firing order.

Isky Hydraulic Flat Tappet Cam and Lifter Kits

For more power and rpm in street cars, and the necessary power and torque for the track.

Isky cams and lifters
Gettin’ Schooled Visiting SAM Tech

We couldn’t spend a few days in the Houston, TX area without taking some time to check out the School of Automotive Machinists & Technology, aka SAM Tech. This accredited trade school founded and operated by the Massingill family, has been getting people educated in engine building and machining for nearly 40 years, and over

SAM Tech