Edelbrock Victor II EFI Intake Manifold for Gen III HEMI Engines - Engine Builder Magazine

Edelbrock Victor II EFI Intake Manifold for Gen III HEMI Engines

Edelbrock has announced the release of its much-anticipated Victor II EFI intake manifold for Gen III HEMI engines. This manifold is designed for use with Eagle Chrysler 5.7L, 6.1L and 6.4L Gen III HEMI engines with fuel injection.

Edelbrock has announced the release of its much-anticipated Victor II EFI intake manifold for Gen III HEMI engines.

Edelbrock Victor II EFI intake manifold (#7179) is designed for use with Eagle Chrysler 5.7L, 6.1L and 6.4L Gen III HEMI engines with fuel injection. The overall design is similar to the factory 6.1L SRT intake manifold, but features relocated fuel injector bosses for improved flow and added nitrous bosses along the near vertical runners. The Victor II EFI also features a wider plenum than the stock 6.1L which yields more room for the 14″ long runners for increased power. This design, along with the aluminum construction, make this intake manifold make ideal for supercharged or turbocharged applications where the OEM active runner control is not desirable.

Other unique features, includes a front inlet has been machined to accommodate the factory style 80mm throttle body or the 92mm Hellcat throttle body with NO adapters or modifications required. It also utilizes the 5.7L and 6.1L throttle body location and will fit all 2009-later Gen III HEMI engines as well as 2005-08 Gen III 6.1L engines. The Victor II EFI will clear most hoods without modifications. A -6AN fuel rail kit (#3647) is also required and sold separately. This fuel rail kit includes; rails, crossover line and hardware for a complete installation.

Features Include:

  • Designed for use with Gen III HEMI 5.7L, 6.1L and 6.4L engines
  • Port flanges have machined grooves to accept stock port seals
  • Ideal for use within 1500-6500 rpm range
  • Manufactured from high-quality aluminum for maximum strength under boost
  • Designed, cast and machined in the USA for unsurpassed quality and performance

You May Also Like

MAHLE Motorsports Introduces 2023 Porsche Application Guide

MAHLE Motorsport announces the 2023 Porsche Application Guide. The guide offers a complete listing of all Porsche-specific piston kits, offered applications, and features user-friendly sections of Water-Cooled and Air-Cooled listings subdivided based on engine size and application. MAHLE’s machine-forged Porsche pistons have lightweight slipper skirts to reduce friction and are dual-coated with Phosphate and MAHLE’s

MAHLE Motorsport announces the 2023 Porsche Application Guide. The guide offers a complete listing of all Porsche-specific piston kits, offered applications, and features user-friendly sections of Water-Cooled and Air-Cooled listings subdivided based on engine size and application.

MAHLE’s machine-forged Porsche pistons have lightweight slipper skirts to reduce friction and are dual-coated with Phosphate and MAHLE’s proprietary GRAFAL® skirt coating to reduce drag, wear, and noise. Piston kits include performance ring sets made from durable materials that are designed to provide consistent contact with the cylinders resulting in increased sealing and oil control.

ProForm Mopar Rocker Arm Kits

MOPAR Emblem Rocker Arm offerings are expanding to include both 1.6 Ratio (LA & B/RB engine families), and 1.7 Ratio (B/RB engines). Features include a roller tip design, internal oiling shaft-to-rocker channel system to lubricate the pivot area, and low-friction bronze bushings; all the same as the popular, high demand MOPAR Emblem 1.5 ratio rockers.

KUKA’s LBR iisy Cobot Ready-To-Use Automation

Referred to as Sensitive Cobotic technology, KUKA’s LBR iisy represents the future of automation. The cobot is ready-to-use automation that quickly and easily integrates into any manufacturing application from pre-defined production processes to open, unstructured work environments with unpredictable conditions from one job to the next. Related Articles – Isky Dual Valve Spring Set – Plazmaman Ford

MGP Billet Aluminum Rods Available Through Diamond

Popular rod applications in stock include small block and big block Chevy, as well as Gen II Chrysler Hemi.

JE Pistons 13-Degree Small Block Chevy Piston

JE recently added to its lineup of circle track pistons with an all-new, 13-degree, small block Chevy design. JE worked closely with engine builders to design a dome and valve pocket profile that fits almost all aftermarket 13-degree SBC cylinder heads on the market.  Related Articles – MAHLE Aftermarket Expands Engine Cylinder Head Gasket Portfolio – Total

Other Posts

Edelbrock’s Smitty Smith Dies at Age 70

Longtime Edelbrock employee Smitty Smith has passed away. He was 70.  Related Articles – PerTronix Performance Brands Promotes Jeff Stacy – NASCAR Announces Hall of Fame Class of 2023 Induction – NASCAR Names New Sr. VP of Competition, Promotions Smith worked for the Olive Branch, Mississippi-based company for 30 years and had been using its

Supercharged 500 cid Billet Hemi Engine

Doc Baker is a racer and builder who does things his own way. A perfect example of his work can be seen under the hood of his 1971 Dodge Demon – this supercharged 500 cubic inch billet Hemi engine. Check out what went into the build!

Doc Baker’s Supercharged 500 cid Billet Hemi Engine

Doc Baker is an engine builder and racer who does things his own way. We were excited to learn more about his 1971 Dodge Demon with a supercharged 500 cid billet Hemi engine in it, and caught up with Doc at the 2022 Builder’s Brawl race event at World Wide Technology Raceway. Check it out!

Engine Ice’s Ice Water Racing Coolant

It protects all engine parts, including cast iron, brass, steel, and rubber.