AMSOIL Announces New OE Synthetic Motor Oil Formulation - Engine Builder Magazine

AMSOIL Announces New OE Synthetic Motor Oil Formulation

AMSOIL has launched a new formulation of its OE Synthetic Motor Oil line to meet the emerging demands of advanced automotive technology. It is specifically designed to deliver maximum wear protection, fuel economy and emissions control for the longer drain intervals recommended by original equipment (OE) manufacturers.

AMSOIL has launched a new formulation of its OE Synthetic Motor Oil line to meet the emerging demands of advanced automotive technology. It is specifically designed to deliver maximum wear protection, fuel economy and emissions control for the longer drain intervals recommended by original equipment (OE) manufacturers.

Low-speed pre-ignition (LSPI) is a common issue found in today’s advanced engines and is much more destructive than typical pre-ignition. OE Synthetic Motor Oil achieved 100 percent protection against low-speed pre-ignition (LSPI), and it provides 47 percent more wear protection than required by the GM dexos 1 Gen 2 specification. AMSOIL OE Synthetic Motor Oil has a 100 percent synthetic, pure chemical structure engineered to remove harmful contaminants and provide long-lasting engine protection and performance. It features an advanced detergent and dispersant additive package designed to protect against sludge and deposits to deliver maximum engine cleanliness.

AMSOIL OE Synthetic Motor Oil is licensed by the American Petroleum Institute (API) to meet and exceed the requirements commonly found in owner’s manuals. It excels in fuel-economy testing, earning the additional ‘Resource Conserving” designation from the API. AMSOIL OE Synthetic Motor Oil is also friendly toward modern emissions-control systems to promote proper operation of catalytic converters for optimum service life and low exhaust emissions.

AMSOIL OE Synthetic Motor Oil is available in the following viscosities: 0W-20, 5W-20, 5W-30 and 10W-30.

For more information: www.amsoil.com

AMSOIL INC.
Phone: 715-392-7101Fax: 715-392-5225Contact: Shawn Swavely

You May Also Like

Supertech Sodium-Filled Valves

These Supertech valves offer a significant reduction in valve head temperatures for today’s turbo engines.

Supertech sodium-filled valves made of inconel/nimonic alloy offer a significant reduction in valve head temperatures that are required for today’s modern turbo engines. A cooler valve improves the material strength and durability while allowing the tuner more flexibility and a wider range of spark timing advances.

Dart Fully Counterweighted LS Crankshaft

These eight-counterweight cranks are precision CNC-machined from premium 4340 steel billet.

Cobb Tuning Subaru Stage 2 Power Package

Cobb OTS maps are aimed at reliably increasing power output with the use of Cobb Stage 2 Power Packages.

Turbosmart’s New Fuel Pressure Regulator Lineup

Turbosmart regulators demonstrate leading fuel control and response via a true 1:1 ratio with superior flow and bypass capacity.

Holley Terminator X Max 7.3L Godzilla Kit

The Terminator X ensures a smooth and responsive driving experience, allowing enthusiasts to harness the immense power of their 7.3L Godzilla engine.

Holley Terminator X Ford Godzilla

Other Posts

Compound-Turbo 6.0L Powerstroke Engine

Justin Gerebizza acquired a fully built ‘06 F-350 looking to achieve the 1,000-hp mark with a compound-turbo 6.0L Powerstroke engine. This Diesel of the Week is even more impressive when you realize it was built in 2015.

Turbocharged LML Duramax Engine

We all know Tony and Tyler Burkhard of Dirty Hooker Diesel have some awesome drag racing and truck pulling Duramax powerhouses. But, the shop’s employees also have some awesome diesel combos. Check out Evan Berry’s turbocharged LML Duramax diesel engine!

Melling Chromoly Oil Pump Steel Gerotors for Ford 5.0L DOHC

These chromoly steel gerotors offer increased tensile strength and toughness. Recommended for race and power-added applications.

melling oil pump gerator
Driven Supercharger Oil

The low-viscosity formulation is designed to reduce drag, unlock horsepower and provide wear protection at high rpm.