AMSOIL Reformulated XL Synthetic Motor Oil - Engine Builder Magazine

AMSOIL Reformulated XL Synthetic Motor Oil

AMSOIL has launched a boosted formulation of its XL Synthetic Motor Oil line of lubricants. The new formulation delivers more cleaning power than its predecessor and promotes longer engine life for today’s advanced automotive technology, including turbochargers and direct injection.

AMSOIL has launched a boosted formulation of its XL Synthetic Motor Oil line of lubricants. The new formulation delivers more cleaning power than its predecessor and promotes longer engine life for today’s advanced automotive technology, including turbochargers and direct injection.

AMSOIL XL Synthetic Motor Oil is API licensed to meet the requirements commonly found in owner’s manuals and features an advanced detergent system to protect vital engine components, including pistons and connecting rods. AMSOIL XL Synthetic Motor Oil delivers 25 percent more cleaning power and is formulated with friction modifiers to deliver maximum fuel economy.

Low-speed pre-ignition (LSPI) is a common issue in the direct-injected, turbocharged engines common on the market today, and LSPI is more destructive than typical pre-ignition. AMSOIL XL Synthetic Motor Oil achieved 100 percent protection against LSPI in the engine test required by the GM dexos1 Gen 2 specification.

XL maintains its fluidity (viscosity) under the most extreme conditions. Some oils break down after extended periods of high-temperature operation, causing excessive oil consumption, engine deposits, accelerated wear and difficult cold-starts. Testing revealed that XL Synthetic Motor Oil provides 64 percent more protection against oil breakdown than required by the GM dexos1 Gen 2 specification.

AMSOIL XL Synthetic Motor Oil is available in the following viscosities: 0W-20, 5W-20, 5W-30, 10W-30 & 10W-40. It provides boosted protection that lasts up to 12,000 miles or one year (whichever comes first) between oil changes.

You May Also Like

CP-Carrillo Pistons and Rods for VW/Audi

This piston and rod combination is designed as a perfect fit and meant to withstand large boost levels.

CP-Carrillo offers #SC7630 pistons and rods for the Volkswagen/Audi EA888 Gen III 2.0L TSI/TFSI engine. This engine is in numerous applications, including the VW Golf Mk7 R, Audi S3 and Audi TTS vehicles.

This piston and rod combination is designed as a perfect fit and meant to withstand large boost levels to take your engine to the next level. The pistons are made to accept 1mm larger valves, as well as deeper valve pockets to accommodate many aftermarket cams.

Eneos Racing Pro 10w-50 Oil

With Racing Pro 10w-50, a 50/50 ester mix provides exceptional wear protection, extra high horsepower, and further anti-oxidation stability.

Eneos 10w-50 motor oil
Fluidampr Performance Damper for Mazda Miata

Fluidampr performance dampers protect your engine from destructive crankshaft torsional vibration.

Fluidampr Mazda Miata damper
Mahle PowerPak Pistons for 6.0L and 6.4L Powerstroke Engines

All four sets offer incredible versatility, allowing a daily driver to become a weekend warrior for drag, dyno, or pulling competitions.

Point One Small Block Chevy Head Stud Kit

Point One’s E190 head studs boast an impressive 190,000 psi nominal tensile strength.

Cadillac Supercharged LS engine

Other Posts

Paul Vasko’s LML Duramax-Powered Diesel Dragster

During our weekend at the 2023 Ultimate Callout Challenge, there were plenty of fun conversations, but speaking with drag racer Paul Vasko was definitely a highlight. His passion is contagious, and his diesel dragster is definitely badass, thanks in part to a turbocharged LML Duramax engine. It’s our Diesel of the Week brought to you

Paul Vasko LML Duramax
Turbocharged 5.9L Common Rail Cummins Engine in a 1947 Ford

After sitting in his father-in-law’s backyard for a number of years, this 1947 Ford was gifted to Chase Wells’ wife. Chase owns 1 Way Diesel Performance and knew someday he’d bring the truck back to life. He did so using a 5.9L common rail Cummins engine on a special episode of Texas Metal’s Loud and Lifted. Check out the result.

1,000-HP Capable 6.7L Powerstroke Engine

Nick Stoner, a customer of Kill Devil Diesel, recently got his fully built 6.7L Powerstroke engine – a build Nick wanted to be capable of 1,000 horsepower. However, Nick is no longer building the truck the engine was going into, so this badass diesel engine is for sale. Check it out.

6.7L Powerstroke engine
Mild vs. Wild: Scheid Diesel and a Pair of 6.7L Cummins Engines

When it comes to building diesel engines, Scheid Diesel is a shop perennially at the top of people’s lists. As such, we made the trip to Terre Haute, IN to visit with owner Dan Scheid and to see the various aspects of the business and discuss the builds of two 6.7L Cummins engines. Check out