DEI Vapor Block Fuel Line Sleeve - Engine Builder Magazine

Main Navigation

Advertisement
Social Connect
Resources
Our Brand Family
EngineBuilder Logo - Babcox Media
Content for engine professionals and enthusiasts
Products

DEI Vapor Block Fuel Line Sleeve

DEI now offers an innovative fuel line solution for a problem common with carbureted early model vehicles – vapor lock. DEI’s new Vapor Block Fuel Line Sleeve provides an easy, sensible and low cost solution to prevent rough idling and difficult starting caused by vapor lock.

Engine Builder
By Engine Builder

DEI now offers an innovative fuel line solution for a problem common with carbureted early model vehicles – vapor lock. DEI’s new Vapor Block Fuel Line Sleeve provides an easy, sensible and low cost solution to prevent rough idling and difficult starting caused by vapor lock.

Related Articles

Designed to greatly reduce heat in the line to keep the fuel cooler and below boiling, the DEI Vapor Block line sleeve installs easily with a split design and adhesive flap. There is no need to disconnect the fuel line to install. Simply wrap Vapor Block around line, remove the adhesive release liner and press adhesive back flap into place.

Made of glass fiber and polyester laminated to an aluminum outer layer, it offers excellent long lasting thermal protection without the expense of paying for expensive repairs or modifications. Currently available in a 5/8” size with a 16mm inside diameter, it can be purchased online or wherever DEI line and hose protection products are sold.

For more information: www.DesignEngineering.com

You May Also Like

Products

Carrillo Forged Pistons and Connecting Rods for Ford 7.3L Godzilla

These pistons are forged from 2618T aluminum alloy and machined on dedicated CNC machine cells to tight tolerances. 2618 aluminum has a lower silicon content than other alloys. That makes the pistons stronger and more ductile—perfect for high-load, high-stress applications like superchargers, turbochargers, or nitrous oxide.  Other features include:• Rated to handle up to 1,500

Engine Builder
By Engine Builder

These pistons are forged from 2618T aluminum alloy and machined on dedicated CNC machine cells to tight tolerances. 2618 aluminum has a lower silicon content than other alloys. That makes the pistons stronger and more ductile—perfect for high-load, high-stress applications like superchargers, turbochargers, or nitrous oxide. 

Other features include:• Rated to handle up to 1,500 horsepower• -21.1cc dish with two valve reliefs• Lateral gas-ported to maintain tighter piston-to-bore clearances for better sealing• 10.5:1 compression on E85 with 1.338-inch compression height• .990-inch chromoly wristpins for use with wire locks• Choice of 4.225- or 4.250-inch bore sizes

Read Full Article

More Products Posts
Fluidampr Harmonic Damper from Summit Racing Equipment

The factory harmonic damper on your modern GM, Ford, or Mopar V8 are ‘tuned’ to absorb what’s called torsional vibration in the engine’s normal operating RPM range. Performance modifications, particularly ones that increase torque, produce added vibration in an RPM range that the elastomer damper wasn’t designed to handle. That vibration will accelerate component wear,

By Engine Builder
Elgin OE Replacement MLS Head Gaskets for Ford 6.7L Diesel Engines

Elgin Industries has introduced original equipment replacement multi-layer-steel head gaskets for 2011-2020 Ford 6.7L diesel engines. Related Articles – Turbosmart TS-1 Externally Wastegated Turbocharger – FuelTech FT600 EFI System – Trick Flow Specialties DHC 200 Aluminum Cylinder Heads The new gaskets – EHG-26661 (left) and EHG-26662 (right) – match the design, fitment and quality of

By Engine Builder
Starrett Introduces Easy-to-Use Precision Wireless Electronic Depth Gages

The L.S. Starrett Company, a leading global manufacturer of precision measuring tools and gages, metrology systems and more, has introduced three Wireless Electronic Depth Gages including the W640JZ, W643JZ, and W644JZ which are made in the U.S.A., part of a line of over 40 new electronic precision gages that Starrett recently introduced to the market.

By Engine Builder
PBM Rotating Assemblies

PBM rotating assemblies have a proven reputation of quality, durability and performance.

By Engine Builder

Other Posts

CHE Precision LS Series Rocker Arms

CHE found ways to improve the factory production rocker arms reliability.

By Engine Builder
Graymills’ SuperSonic Liftkleen Parts Washer

Unlike standard spray cabinet washers, immersion cleaning exposes all surfaces of the part, including blind holes and small crevices, to the cleaning solution.

By Engine Builder
IRD Racing K4 Series Custom Carburetors

From Mega Trucks, Super Cat Class Poker Run boats, to all out drag racing, this carburetor can handle whatever is thrown at it.

By Engine Builder
Fluidampr for SRT 6.2L Hellcat Engine

Upgrading to a Fluidampr performance damper when engine mods are done further ensures long term durability and optimum power .

By Engine Builder