Proform Digital Variable Speed Fan Controller - Engine Builder Magazine

Main Navigation

Advertisement
Social Connect
Resources
Our Brand Family
EngineBuilder Logo - Babcox Media
Content for engine professionals and enthusiasts
Products

Proform Digital Variable Speed Fan Controller

Proform’s Digital Variable Speed Fan Controller significantly reduces engine over-heating issues by running the engine’s fan or fans at varying speeds to maintain a consistent temperature, while constantly adjusting as engine heat fluctuates.

Engine Builder
By Engine Builder

Maintaining a consistent engine temperature is a more efficient way to keep your engine cool. Many other basic fan controllers turn the fan on when the engine is getting too hot, and off after expending a lot of energy cooling it. This recurring cycle can lead to amperage spikes, excessive fan wear, and plenty of undesired fan noise. Proform’s Digital Variable Speed Fan Controller significantly reduces these issues by running the engine’s fan or fans at varying speeds to maintain a consistent temperature, while constantly adjusting as engine heat fluctuates.

Related Articles

To substantially reduce amperage spikes, the controller gradually starts the fan(s) and then slowly ramps up to the required speed. As the car runs, the controller receives real-time temperature information from one of the two included brass probes. The controller processes this information to run the fan(s) at the correct speed needed to maintain the desired engine temperature. Check out the video:

Using the controller is easy, set the temperature with a simple + or – button interface, and Mode button to toggle between F° or C° temperatures, as well as the total amperage running through the system. The weather resistant billet aluminum housing has a sleek profile that easily fits under the hood. The bright digital display makes adjusting in low light areas a non-issue. The controller can accommodate one or two 12-volt brushed motor fans, and comes with a push-in, and thread-in brass probe to best fit your engine configuration. Necessary electrical connections included.

Features:

  • Substantially Reduces Amperage Spikes
  • Maintains Consistent Engine Temperature by Adjusting Fan(s) Speed as Heat Fluctuates
  • Includes Push-in & Thread-in Brass Probe to Best Fit Engine Configuration
  • Works w/ most 12V Brushed Motor Fans

For more information contact Ryan Salata at 586.774.2500 or [email protected].

You May Also Like

Products

Carrillo Forged Pistons and Connecting Rods for Ford 7.3L Godzilla

These pistons are forged from 2618T aluminum alloy and machined on dedicated CNC machine cells to tight tolerances. 2618 aluminum has a lower silicon content than other alloys. That makes the pistons stronger and more ductile—perfect for high-load, high-stress applications like superchargers, turbochargers, or nitrous oxide.  Other features include:• Rated to handle up to 1,500

Engine Builder
By Engine Builder

These pistons are forged from 2618T aluminum alloy and machined on dedicated CNC machine cells to tight tolerances. 2618 aluminum has a lower silicon content than other alloys. That makes the pistons stronger and more ductile—perfect for high-load, high-stress applications like superchargers, turbochargers, or nitrous oxide. 

Other features include:• Rated to handle up to 1,500 horsepower• -21.1cc dish with two valve reliefs• Lateral gas-ported to maintain tighter piston-to-bore clearances for better sealing• 10.5:1 compression on E85 with 1.338-inch compression height• .990-inch chromoly wristpins for use with wire locks• Choice of 4.225- or 4.250-inch bore sizes

Read Full Article

More Products Posts
Fluidampr Harmonic Damper from Summit Racing Equipment

The factory harmonic damper on your modern GM, Ford, or Mopar V8 are ‘tuned’ to absorb what’s called torsional vibration in the engine’s normal operating RPM range. Performance modifications, particularly ones that increase torque, produce added vibration in an RPM range that the elastomer damper wasn’t designed to handle. That vibration will accelerate component wear,

By Engine Builder
Elgin OE Replacement MLS Head Gaskets for Ford 6.7L Diesel Engines

Elgin Industries has introduced original equipment replacement multi-layer-steel head gaskets for 2011-2020 Ford 6.7L diesel engines. Related Articles – Turbosmart TS-1 Externally Wastegated Turbocharger – FuelTech FT600 EFI System – Trick Flow Specialties DHC 200 Aluminum Cylinder Heads The new gaskets – EHG-26661 (left) and EHG-26662 (right) – match the design, fitment and quality of

By Engine Builder
Starrett Introduces Easy-to-Use Precision Wireless Electronic Depth Gages

The L.S. Starrett Company, a leading global manufacturer of precision measuring tools and gages, metrology systems and more, has introduced three Wireless Electronic Depth Gages including the W640JZ, W643JZ, and W644JZ which are made in the U.S.A., part of a line of over 40 new electronic precision gages that Starrett recently introduced to the market.

By Engine Builder
PBM Rotating Assemblies

PBM rotating assemblies have a proven reputation of quality, durability and performance.

By Engine Builder

Other Posts

CHE Precision LS Series Rocker Arms

CHE found ways to improve the factory production rocker arms reliability.

By Engine Builder
Graymills’ SuperSonic Liftkleen Parts Washer

Unlike standard spray cabinet washers, immersion cleaning exposes all surfaces of the part, including blind holes and small crevices, to the cleaning solution.

By Engine Builder
IRD Racing K4 Series Custom Carburetors

From Mega Trucks, Super Cat Class Poker Run boats, to all out drag racing, this carburetor can handle whatever is thrown at it.

By Engine Builder
Fluidampr for SRT 6.2L Hellcat Engine

Upgrading to a Fluidampr performance damper when engine mods are done further ensures long term durability and optimum power .

By Engine Builder