Connect with us

Components

Can Used Race Parts See New Life?

Advertisement

Eatmon Racing Engines Finds Veterans to be Valuable

Advertisement
Click Here to Read More
Advertisement

In 1950, the Mexican government sponsored a race to inform the world that Mexico had a new system of roads known as the Pan-American Highway, which stretched across the country from north to south for commerce and tourism. That race was the original Pan-Am.

Today, known as the La Carrera Panamericana, the race features up to 100 vintage racecars starting down in southern Mexico in October to race nearly 2,000 miles back up north. It’s seven days of racing, around 350 miles of speed stages, over closed, public roads through some of the most beautiful country north of the equator. The race has been compared the likes of the Mile Miglia, the Targa Florio of Italy and the Grand Prix of Tripoli.

The original race was canceled in 1955 because of cost and concerns about safety, but by that point its purpose had been accomplished. However, in 1988, a group of Mexican and North American auto enthusiasts revived the Pan-Am as a “pro-rally” or “stage rally” race.

Advertisement

If you’re like myself and Scott Eatmon, the owner of Eatmon Racing Engines in Wilson, NC, then you haven’t heard of this race either, until now. But one of Eatmon’s newest customers who DID understand this race came to Eatmon because he had heard of the shop’s Dodge NASCAR engines, and wanted one specifically for the La Carrera Panamericana.

Eatmon Racing Engines was founded by Scott’s dad, Harold, in 1980, and features an engine shop, machine shop, a dyno service, a parts supply store on Ebay, and focuses on Ford, Chevy and Dodge NASCAR-type engines, dirt late-model engines and racing engines for boats.

“It’s a wide variety of stuff we deal with,” says Eatmon, who started in the shop in 1991. “We’ve been doing this a long time. We have four full-time employees and we’ve always been here in Wilson, NC.”

One of those employees is Scott’s youngest son, 19-year-old NAME, who is enrolled at the local community college’s CNC machining program.

“We’ve had three generations in the shop now,” he says.

In addition to all of the things Eatmon Racing Engines offers, the shop does 30 percent of its business internationally, shipping engines to places like Australia, New Zealand, Norway, Sweden, France and England.

Advertisement

“People are racing with our engines all over the world,” Eatmon says. “A lot of our customers are road racers, some of them are dirt track racers. We have drag racing and boat racing customers too, so a wide variety of customers.”

The shop’s claim to fame was building NASCAR engines through the ’90s along with Robert Yates Racing.

“Back then it was the Busch series and we used to build engines for Dale Jarrett, Ernie Irvan and Kenny Irwin, Jr. As more and more money got pumped into NASCAR, all the NASCAR teams started having in-house engine builders,” Eatmon says. “The Cup teams started taking over all the truck work and the Busch series work, which kind of cut outside shops like us out. But I kept my connections up there with all those guys. I go up there regularly to buy a lot of their NASCAR parts.  We use them to build the Ford, Chevy and Dodge NASCAR-type engines to sell to people all over the world. That’s probably our biggest business, selling the NASCAR-type engines outside of NASCAR, to people who use the in all sorts of racing.”

Advertisement

Eatmon’s customer looking for the La Carrera Panamericana engine got set up with a Dodge R5P7 NASCAR engine.

According to the La Carrera Panamericana raxe rules, all engines are limited to 365 cid and must be set up with a wet sump oiling system. The cars are also not allowed to exceed 144 mph during the race.

“To start, it was actually not a complete engine,” Eatmon says. “We assembled it from parts from several NASCAR teams, including Evernham Motorsports and Penske Engines. Some of these components are used and some are new.”

The engine has a Bryant crankshaft and Carrillo rods. The NASCAR teams don’t run these cranks and rods for more than one or two races before they shelve them.

Eatmon did have to use a new set of custom JE pistons made for the low compression ratio, because one of the rules in this endurance race requires competitors to run  on pump gas – a restricition that is taken very seriously.

Advertisement

“They have to stop at the actual gas stations and fill up along this route while they’re racing,” he says. “So we had to make the engine low compression for pump gas.”

The engine block had some internal machine work to convert it from a dry sump system to a wet sump. Eatmon milled out the cam tunnel so all the oil would drain back to the oil pan.

“There’s no provision for an internal oil pump in these NASCAR blocks, so we have a one-stage external oil pump on the front of the engine,” he says. “We also have a custom-made, fabricated oil pan that we made ourselves. We cut the sump off of a wet sump oil pan, and then we take the NASCAR dry sump oil pan and cut a hole in the bottom and we weld those together. Then we make a custom pickup to get the oil out of the pan to the one-stage pump. The customer needs to mount a remote oil filter somewhere under the hood, and that feeds to the front of the engine.”

Advertisement

The Dodge R5P7 NASCAR engine also include a Jesel belt drive instead of a timing chain. It also has Jesel roller rocker arms and roller keyway lifters, a COMP Cams solid roller camshaft, which is a custom grind that Eatmon Racing Engines had done just for this build. The engine has Del West titanium valves and retainers. The valves are coated for the unleaded pump gas, otherwise they’ll wear out quickly.

“The heads are CNC ported Dodge P7 cylinder heads and the engine has an Edelbrock ported intake manifold to match,” Eatmon says. “The engine also uses Cometic gaskets and seals throughout, Clevite bearings and Total Seal rings.”

Now that Eatmon and his team have put the finishing touches on the Dodge R5P7 NASCAR engine, it puts out 750 horsepower at 7,800 rpm and peak torque of 540 lb.-ft. at 6,500 rpm with a 10:1 compression ratio.

This Dodge engine competed south of the border in Mexico in the historic La Carrera Panamericana 2,000-mile endurance race from October 13-19, 2018.

For information about the race, visit PanAmRace.com  ν

Advertisement

POPULAR POSTS

Sponsored Content

How to Break-In Your Piston Rings, The Right Way!

Sponsored Content

Forging a Stronger Piston: Aligned Grain Flow Technology

Sponsored Content

Crowning Glory – Coatings Make Great Pistons Even Better

Sponsored Content

Should I Reuse My Pistons or Order New Ones? How To Tell If Pistons Are Still Good

Connect