Hot Shot's Two-Step Oil System Treatment - Engine Builder Magazine

Hot Shot’s Two-Step Oil System Treatment

Hot Shot’s Secret, a brand of performance oil and fuel additives manufactured by Lubrication Specialties Inc., has introduced a powerful two-step oil system treatment safe for gas and diesel powered vehicles.

Hot Shot’s Secret, a brand of performance oil and fuel additives manufactured by Lubrication Specialties Inc., has introduced a powerful two-step oil system treatment safe for gas and diesel powered vehicles. When used as directed, the two-step oil system treatment provides four major benefits: improved power and compression, reduced lifter and valve noise, reduced engine wear, and an increase in fuel economy.

The first step in the treatment is to use Stiction Eliminator for overall cleaning of the engine’s oil system. In many cases, this treatment alone has restored injectors that are failing due to the burnt sticky oil that accumulates in the engine over time. Based on comparative tests using the ASTM D4828 Standard Test Method, Stiction Eliminator removes 50% more stiction than leading competitors and is proven to reduce engine wear by 62%. Simply add Stiction Eliminator when making a fresh oil change. For a light car with a four to six quart engine capacity, the initial clean-out requires just 16 ounces of this first step of the treatment.

Following Stiction Eliminator, Hot Shot’s Secret recommends adding their FR3 Friction Reducer on the next oil change at a ratio of 1.5 ounces to every 1 quart of oil for long-term engine performance, restored power and improved MPG. FR3 is a synthetic friction reducer with three patented technologies. The formula uniquely contains patented synthetic lubricants with lubricating properties compared to PAO or mPAO synthetics of the same viscosity. The anti-wear component of the formula is a proprietary carbon nano particle that fills in microscopic irregularities on the machined surface to provide a smoother surface for the lubricating film to form.

The result of using the Hot Shot’s Secret Two Step Oil Treatment is a newly cleaned oil system now fully protected for maximum long term performance. Combined, the treatment first thoroughly cleans the engine’s oil system, then with FR3 added extends the base oil performance in shear stability, oxidation stability and film strength. Test results demonstrate a reduction in friction that can cause power robbing heat and improved fuel economy up to 5%.

For more information: hotshotsecret.com or 800-341-6516.

You May Also Like

Hot Shot’s Secret Green Diamond 0W-20 Light-Duty Diesel Oil

Hot Shot’s Secret Green Diamond is formulated for use in GM Duramax 2.7 and 3.0 diesel engines that require Dexos D 0W-20 specification.

Hot Shot’s Secret now offers a new 0W-20 light-duty diesel motor oil that is ideal for the GM Duramax 2.7L and 3.0L engine, or any diesel engine that requires a Dexos D 0W-20 specification. Hot Shot’s Secret 0W-20 Green Diamond Fleet is a 100% fully synthetic oil using only Group III base oils and is infused with Hot Shot’s Secret’s patented FR3 nano technology that improves shear stability, film strength and friction reduction.   

PRT’s 30 New Complete Strut Assemblies

The new items represent more than 10 Million vehicles in new coverage and come to expand the PRT portfolio in North American Aftermarket.

NGK MOD Series Ignition Coils

Modern high-performance engines need a bigger spark to make power. NGK’s MOD Series Ignition Coils fit the bill.

LS Engine Flatout Gaskets

Flatout Gaskets LS valve cover gaskets are available in paper/silicone in 0.60″ or 0.120″ thicknesses or steel/silicone laminate in 0.50″ or 0.100″ thicknesses.

Engine Ice’s Ice Water Racing Coolant

Engine Ice’s Ice Water provides a significant reduction in surface tension, moving heat away from the engine fast.

Other Posts

Hot Shot’s Secret Black Diamond Outlaw 10W-30 Synthetic Engine Oil

Formulated for extreme protection and high TBN levels, ideal for street or strip.

Eneos Racing Street 0W-50 Motor Oil

These racing formulations are created using a history of OEM innovation in conjunction with racing partners around the world.

Dillon Manufacturing Carbinite Coating for Milling Performance

Dillon’s Carbinite coating is ideal for hard or soft jaws, especially Vise Jaws and Step Jaws used for clamping applications.

Summit Racing’s Speedmaster Top End Engine Kits

Kits include a pair of assembled aluminum cylinder heads, an intake manifold, aluminum roller rocker arms, cast aluminum valve covers, and gaskets.